ECX SPEED 13 connecting cable The connecting cable fits ECX SPEED 13 that are configured with a pin and external thread. Details about the motor can be found on pages 201–208 and online at www.maxongroup.com. Characteristics: • Steel housing • Withstands 1000 sterilization cycles in the autoclave • Silicone outer shell • PTFE cable insulation • Electrical conductors with cable end sleeves • A motor cables shielded. The shielding is fitted with heat shrink tubing and cable end sleeve. ECX SPEED 13 connecting cable Part number Cable version 585750 ECX 13 connecting cable, type A: for motors with Hall sensors or for versions with encoders 592191 ECX 13 connecting cable, type B: for motors without Hall sensors and without encoders 595698 ECX 13 connector set (without cable)
A
B
Cable and pin assignment, type B Color Pin
Cable and pin assignment, type A Color Pin
Assignment Winding 1 Winding 2 Winding 3
Assignment Winding 1 Winding 2 Winding 3
1 2 3 9
AWG 22
red black white pink purple
1 2 3 4 5 6 7 8
AWG 22
red black white orange blue yellow brown grey pink purple green
- -
AWG 26
V CC GND H1/-
AWG 26
10
H2/Data H3/CLK
no pin no pin no pin
- - -
maxon accessories 595
© 2025 maxon. All rights reserved. June edition. Subject to change.
Made with FlippingBook Publishing Software