ECX 19 connecting cable The connecting cable fits ECX 19 that are configured with a pin and external thread. Details about the motor can be found on pages 213–220 and online at www.maxongroup.com. Characteristics: • Steel housing • Withstands 1000 sterilization cycles in the autoclave • Silicone outer shell • PTFE cable insulation • Electrical conductors with cable end sleeves • A motor cables shielded. The shielding is fitted with heat shrink tubing and cable end sleeve. ECX 19 connecting cable Part number Cable version 589852 ECX 19 connecting cable, type A: for motors with Hall sensors or for versions with encoders 589892 ECX 19 connecting cable, type B: for motors without Hall sensors and without encoders 551012 ECX 19 connector set (without cable)
Cable and pin assignment, type B Color Pin AWG 20 red 1 black 2 white 3 AWG 26 pink 9 purple 10
Cable and pin assignment, type A Color Pin AWG 20 red 1 black 2 white 3 AWG 26 orange 4 blue 5 yellow 6 brown 7 grey 8 pink 9 purple 10 green no pin
maxon accessories 597
© 2023 maxon. All rights reserved. June edition. Subject to change.
Made with FlippingBook Publishing Software