ECX SPEED 19 connecting cable The connecting cable fits ECX SPEED 19 that are configured with a pin and external thread. Details about the motor can be found on pages 217–224 and online at www.maxongroup.com. Characteristics: • Steel housing • Withstands 1000 sterilization cycles in the autoclave • Silicone outer shell • PTFE cable insulation • Electrical conductors with cable end sleeves • A motor cables shielded. The shielding is fitted with heat shrink tubing and cable end sleeve. ECX SPEED 19 connecting cable Part number Cable version 589852 ECX 19 connecting cable, type A: for motors with Hall sensors or for versions with encoders 589892 ECX 19 connecting cable, type B: for motors without Hall sensors and without encoders 551012 ECX 19 connector set (without cable)
A
B
Cable and pin assignment, type B Color Pin
Cable and pin assignment, type A Color Pin
Assignment Winding 1 Winding 2 Winding 3
Assignment Winding 1 Winding 2 Winding 3
1 2 3 9
AWG 20
red black white pink purple
1 2 3 4 5 6 7 8
AWG 20
red black white orange blue yellow brown grey pink purple green
- -
AWG 26
V CC GND H1/- H2/- H3/-
AWG 26
10
9 10
NTC/Data NTC/CLK
no pin
-
maxon accessories 597
© 2025 maxon. All rights reserved. June edition. Subject to change.
Made with FlippingBook Publishing Software