When torque tools slip out of calibration, miscalibration impacts product quality. Having an accurate way to regularly test calibration onsite is a great way to reduce risk and ensure safety. With Mountz torque analyzers and sensors, you can test tools before they go into service daily. Testing prevents employees from working with miscalibrated tools and enhances quality management. Using your own torque testing equipment is also more efficient since you can evaluate your tools without sending them to a laboratory. Whether you want stand-alone sensors for hand and power torque tools or run-down adapters that simulate actual joint conditions, Mountz has many options to choose from.
Mountz Torque 2024 Calibration Price List
E F F E C T I V E January 1 , 2 0 2 4
Phone: 408.292.2214 www.mountztorque.com
Page | 1
Mountz - “The Torque Tool Specialists ® ”
January 1, 2024
STANDARD TERM S AND CONDITIONS OF SALE
1. Controlling Document The acceptance of an order from the purchaser ("Purchaser") is expressly made conditional on Purchaser's assent to the terms and conditions set forth herein, and Mountz, Inc. ("Seller") agrees to furnish the goods covered thereby (the "Goods") only upon these terms and conditions. This document constitutes the entire agreement of the parties with respect to the subject matter hereof and supersedes all prior understandings and agreements. No term or condition of Purchaser's order inconsistent with the terms and conditions hereof, and no term, condition, statement or representation not contained herein, will be binding on Seller as a warranty or otherwise. Unless Purchaser notifies Seller in writing to the contrary promptly after receipt hereof, Purchaser will be deemed to have accepted the terms and conditions hereof and the sale and shipment by Seller of the Goods will be conclusively deemed to be subject to the terms and conditions hereof. No waiver, alteration, or modification of any of the provisions hereof will be binding on Seller unless made in writing signed by an authorized officer of Seller. 2. Prices and Taxes Prices shown are for delivery of Goods F.O.B. Seller's facility. Any manufacturer's, sales, use, or excise tax; custom, inspection, certification, or testing fee; or any other tax, fee, or charge of any nature whatsoever imposed by governmental authority, on or measured by the transaction between Seller and Purchaser will be paid by Purchaser in addition to the prices quoted or invoiced. All delinquent payments will be subject to a finance charge of one and one-half percent (1½%) per month or, if less, the maximum amount permitted by law. Purchaser agrees to pay all costs of collection, including attorney fees, whether or not a lawsuit is initiated. 3. Terms and Method of Payment (a) If Seller extends credit to Purchaser, the terms of payment will be net thirty (30) days from date of invoice. The amount of credit extended by Seller may be changed or withdrawn by Seller at any time. Seller currently accepts payment by major credit card (VISA, MasterCard and American Express), but reserves the right to change its credit card policies. If Seller does not extend credit to Purchaser, Seller may in its discretion require payment, by such method as Seller may specify, at time of placement of the order or prior to shipment of the Goods. (b) Each shipment of Goods will be considered a separate and independent transaction and payment there for will be made accordingly. If shipment is delayed by Purchaser, payment will become due on the date when Seller is prepared to make shipment. Goods held by Seller for Purchaser because of Purchaser's delay will be held at Purchaser's risk and expense. (c) If in the judgment of Seller, the financial condition of Purchaser at any time does not justify continuance of production or shipment upon the terms of payment specified, Seller may require full or partial payment in advance. Furthermore, Seller may refuse to ship Goods if Purchaser has an outstanding overdue balance with Seller. 4. Security Interest Seller will retain and is hereby granted a security interest in the Goods (and any replacements there for)delivered hereunder and in the proceeds from the sale or disposition thereof, until Purchaser has made payment in full for such Goods. Purchaser authorizes Seller to file all documents (such as UCC-1 Financing Statements) necessary to perfect such security interest. Without limitation of any other rights afforded Seller under applicable law or hereunder, Seller has the right, upon demand, to repossess Goods delivered hereunder if Purchaser fails to make timely payment. 5. Delivery and Delay Delivery of Goods to a carrier at Seller's plant or other loading point will constitute delivery to Purchaser. All risks of loss and/or damage in transit are borne by Purchaser. Seller will drop ship Goods only on a case-by-case basis, in Seller's discretion. Seller reserves the right to make partial deliveries, and unless otherwise specifically agreed, all such partial deliveries will be separately invoiced, and such invoices will be paid by Purchaser when due, without regard to the timing or schedule of subsequent deliveries. Delay in delivery of any scheduled shipment will not relieve Purchaser of its obligations to accept remaining deliveries. Seller will not be liable for any loss or damage as a result of any delay due to any cause beyond Seller's direct reasonable control, including, without limitation, acts of God, acts of Purchaser, fire, theft, accidents, slowdowns, strikes, riots, embargoes, governmental acts, regulations or requests, delays of common carriers, inability to obtain necessary labor, materials or manufacturing facilities, or other similar causes. In case of any such delay, delivery dates will be extended by the amount of the delay. In addition, Seller shall have the right, for any reason, to delay scheduled delivery dates upon thirty (30) days prior notice to Purchaser and to cancel any order upon ninety (90) days prior notice. In no event will Seller's liability for any other delay or non-delivery caused by any reason exceed the sales price to Purchaser of the delayed or non-delivered Goods. 6. Inspection Purchaser will examine all Goods promptly upon receipt thereof. Within thirty (30) days of such receipt, Purchaser will notify Seller in writing of all claimed shortages, defects, and other errors in delivery and, if a rejection is intended, the reasons there for. Failure to give such notice will constitute unqualified acceptance and a waiver of all such claims by Purchaser and the Goods will be deemed accepted as of the date of shipment. 7. Limited Warranty Seller warrants that the Goods will be free of defects in materials or workmanship, under normal use and service, for a period of one (1) year from date of shipment from Seller's facility. For the FG & FGA screwdrivers and FGC wrenches, the seller warrants that the Goods will be free of defects in materials or workmanship, under normal use and service, for a period of two (2) year from date of
Page | 2
Mountz - “The Torque Tool Specialists ® ”
January 1, 2024
shipment from Seller's facility. For the EPT-Series Li-ion Battery (25.2V 3.0A), the seller warrants that the Goods will be free of defects in materials or workmanship, under normal use and service, for a period of six (6) months from date of shipment from Seller's facility. The liability of Seller under the foregoing warranty is limited, at Seller's option, solely to repair or replacement with equivalent Goods, or an appropriate credit adjustment not to exceed the sales price to Purchaser. This warranty will apply only if (a) Purchaser notifies Seller in writing, within the warranty period, promptly upon discovery of defects, with a detailed description of such defects and the affected Goods, (b) Purchaser has obtained a Return Materials Authorization ("RMA") from Seller which RMA Seller agrees to issue to Purchaser promptly after Purchaser provides Seller's Customer Service Department with the original purchase order number and invoice number and date, (c) the defective Goods are returned to Seller within twenty days after the issuance of the RMA, with the RMA shown on each shipping carton, transportation and other applicable charges prepaid by Purchaser, and (d) Seller's examination of such Goods discloses to its reasonable satisfaction that defects were not caused by negligence, misuse, improper installation, improper maintenance, accident or unauthorized repair or alteration. The original warranty period for any Goods which have been repaired or replaced by Seller will not thereby be extended. Unless otherwise indicated in the RMA, defective products should be shipped to Seller at the following address: Returns Processing Center, Mountz, Inc., 19051 Underwood Road, Foley, AL 36535. THE FOREGOING WARRANTY IS PROVIDED EXPRESSLY IN LIEU OF, AND SELLER HEREBY DISCLAIMS, ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY OR ALL OTHER OBLIGATIONS OR LIABILITIES ON SELLER'S PART RELATING TO ANY ALLEGEDLY DEFECTIVE PRODUCT, AND SELLER NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR SELLER ANY OTHER LIABILITY. 8. Limitations of Liability The remedies set forth in Sections 6 and 7 above constitute Purchaser's sole and exclusive remedies for nonconforming or defective Goods. In no event, including without limitation if Goods are nonconforming, defective, infringing, delayed, or not delivered, will Seller be liable for any special, contingent, incidental, indirect, or consequential damages (collectively, "Excluded Damages"), even if Seller has been advised of the possibility of such damages, whether under a contract, tort, warranty, property, or other legal theory. Excluded Damages include, but are not limited to, personal injury, property damage, anticipated profits, labor expended, delays, loss of use, and goodwill. In no event will Seller's aggregate liability to Purchaser, and all third parties, relating to or arising out of any Goods, exceed the purchase price of the Goods. 9. Returns Customers may request to return new and unused standard Products may be returned to Seller for a refund under the following terms: Timing: ● For customers within the continental United States, goods may be returned within thirty (30) days from the date of shipment from Seller’s facility. ● For customers outside of the continental United States, goods may be returned within ninety (90) days from the date of shipment from Seller’s facility. ● To return a Product, the Customer must call or email a return request to our customer care line at (408) 850-9978 (USA) or +44 1428 741756 (International) to request a Return Material Authorization form ("RMA"). The RMA will provide detailed instructions on the return process. Return Products must be shipped securely.
Defective Product:
● Claims of product defects will be reviewed under the warranty outlined in our Standard Terms and Conditions.
Incorrect Shipments:
● If Seller ships the wrong Product, it will provide the customer with a prepaid shipping label. ● If the Product shipped was not the Product ordered by the Customer, the Customer may elect to have the correct Product shipped.
Customizations:
● Items that include customizations, such as special engineering requests or laser engraving, are non-returnable and non- refundable. Please ensure all customizations are correct before placing your order, as these items cannot be altered or canceled once production has begun.
Page | 3
Mountz - “The Torque Tool Specialists ® ”
January 1, 2024
Product Condition:
● When returning for a refund, the product must be in new, sellable condition. All original packaging, documentation, accessories, and parts included in the original shipment must be returned. ● If returned Products do not meet the above requirements, the Seller may, in its discretion, issue a partial refund or return such Product to the Purchaser at the Purchaser’s expense. ● No return credit will be provided for used, damaged, or shopworn Products.
Restocking Fee :
● Seller reserves the right to approve returns beyond our standard 30-day (90-day outside of the United States) return window. ● A restocking fee will be applied to all returned items outside of the 30-day return policy (90-day international) based on the item's value. The fee covers the costs of processing and restocking returned items. This fee does not apply to orders where we, the Seller, shipped incomplete or incorrect items or the items received have defects.
The restocking fee is calculated as follows:
Item Value
Restocking Fee
Under $5000
10% 25%
Over $5000
Shipping:
● Seller strongly encourages you to send returns with a tracking number or delivery confirmation number. Seller recommends that you (1) use a carrier that offers shipment tracking for all returns and (2) either insure your package for safe return to Seller or declare the full value of the shipment so that you are completely protected if the shipment is lost or damaged in transit. Seller is not responsible for lost or damaged returns. ● If you choose not to (1) use a carrier that offers tracking or (2) insure or declare the full value of the product, you will be responsible for any loss or damage to the product during shipping. Replacement or refund will not be issued unless a valid proof of delivery can be provided.
Payment:
● Refunds will only be issued to the original payment method used for purchase. If that payment method is no longer valid, we will reach out to the RMA contact for processing. ● Shipping charges and any charges for calibration, certification, or other services will not be refunded. 10. Tooling and Designs All tooling, molds, fixtures, specifications, drawings, designs, data, information, methods, patterns, descriptions, programs, software, ideas and/or inventions made, used, conceived, developed or acquired by Seller incident to its performance hereunder, and all patent, trade-secret, know-how, copyright or other proprietary rights therein, will be the exclusive property of Seller. No part of the purchase price of any Goods delivered by Seller will be deemed consideration paid for any of the foregoing. 11. Government Contracts If any purchase order indicates that the purchase is being made for use under a U.S. Government Contract, only those terms and conditions which are made mandatory by federal statute or regulation for inclusion in fixed price supply subcontracts covering standard commercial proprietary items sold to the public will be deemed incorporated herein by reference. Any other (nonmandatory) terms and conditions of the prime Government contract which are intended to be included herein must be set forth in a separate written document signed by an authorized officer of Seller in order to be binding on Seller. 12. No Application to Licensed Products or Engineering Services These Standard Terms and Conditions only apply to the sale of the Goods, and not to any software or other products licensed to Purchaser or engineering services performed by Seller. All product licenses are governed by the terms and conditions contained in the license agreements covering such licensed products, and engineering services are governed by separate engineering services agreements. 13. Changes Seller reserves the right to discontinue or modify any particular Goods at any time without prior notice. Prices and terms shown in any quotation issued by Seller shall apply only for the period indicated in the quotation and if there is no such indication, then for a period of fifteen (15) days.
Page | 4
Mountz - “The Torque Tool Specialists ® ”
January 1, 2024
14. General These Standard Terms and Conditions will be governed by, and construed in accordance with, the laws of the State of California applied to agreements between California residents entered into and to be performed entirely in California. Any lawsuit to interpret or enforce this agreement may be brought only in Santa Clara County, California and Seller and Purchaser hereby consent to the exclusive jurisdiction and venue of such courts. The prevailing party in any suit or proceeding arising out of relating to this agreement shall be awarded its costs and reasonable attorneys' fees. The invalidity or unenforceability of one provision under one circumstance will not otherwise affect the validity or enforceability of any provision under any other circumstances. 15. Decision Rule The statement of conformity is based on simple acceptance. The calibration uncertainty is not taken into account in the statement of conformity unless stated otherwise .
CALIBRATION AND REPAIR SERVICES
Mountz, Inc. offers repair and calibration services for all tools we sell. Our standard service provides a turnaround time of 5 working days from the time we receive the tool. A 48-hour rush service is available, at an additional charge, for your urgent repair or calibration needs. Mountz is an ISO 9001 certified and ISO 17025 accredited company. We also offer calibration and repair services for tools from other manufacturers. Additional charges may be necessary in some cases for 'non-mountz' tools, for example if special fixtures are needed to perform calibration. Delays may be experienced if parts lists or other technical information is needed from the manufacturer to complete services.
CALIBRATION Every certificate is NIST traceable and includes readings in the CW direction only, taken at 3 points (3-PT) through the full scale of the tool; except for preset type tools, which only include 1 point. Readings in CCW direction are available at an additional cost.
Electronic analyzers and transducers are calibrated from 10% to 100% of full scale.
3-PT* calibration at 10, 50, and 100% of full scale. *$40.00 for each additional Point (Item # 990056)
Wrenches, drivers, and dial analyzers are calibrated from 20% to 100% of full scale.
3-PT* calibration at 20, 60, and 100% of full scale *$40.00 for each additional Point (Item # 990056)
Multipliers are calibrated at 3-points* through the published range of the tool. *$40.00 for each additional Point (Item # 990056)
Note : Additional points are "calibration validation" points, not additional measurement points used to produce the calibration result.
AT TIME OF TOOL PURCHASE Every new Mountz torque analyzer and torque sensor is supplied with a free ISO 17025 Certification of Calibration at the time of purchase. All other tools require purchase of calibration certificate as needed, and are subject to prices below.
Item # 990100 990101 990102 990103 990104 990105 990106 990107 990108 990109 990110 990111 990112 990113 990114 990115 990116 990117
Service
Price $35.00 $35.00 $50.00 $50.00 $50.00 $50.00 $50.00
17025 Certificate - Preset Torque Screwdriver 17025 Certificate - Preset Torque Wrench 17025 Certificate - Adjustable Torque Screwdriver 17025 Certificate - Adjustable Torque Wrench 17025 Certificate - Electric Screwdriver 17025 Certificate - Pneumatic Screwdriver
17025 Certificate - Pulse Tool 17025 Certificate - Control Tool 17025 Certificate - DC Control Tool 17025 Certificate - Torque Analyzer 17025 Certificate - Torque Sensor
$50.00 per preset value $50.00 per preset value
Free Free
17025 Certificate - Pneumatic Torque Multiplier 17025 Certificate - Electric Torque Multiplier 17025 Certificate - Hand Torque Multiplier Non-accredited Certificate - Calibration Wheel Non-accredited Certificate - Segment Arm
$125.00
$125.00 per preset value
$125.00
Free Free Free
NVLAP Certificate - Weight Certificate of Compliance
$145.00
Page | 5
Mountz - “The Torque Tool Specialists ® ”
January 1, 2024
CALIBRATION PRICE SHEET
ISO17025 Calibrations
Preset Hand Torque Screwdrivers and Torque Wrenches
Std Service
Rush Service *
Sales Description
Item # 990600 990601 990602 990603
Price
Item # 990625 990626 990627 990628
Price
ISO17025 Calibration - Preset Wrench or Screwdriver (0 - 50 lbf.ft) ISO17025 Calibration - Preset Wrench (51 - 250 lbf.ft) ISO17025 Calibration - Preset Wrench (251 - 1000 lbf.ft) ISO17025 Calibration - Preset Wrench (1001 - 2500 lbf.ft)
$140.00 $190.00 $250.00 $430.00
$235.00 $285.00 $420.00 $600.00
Adjustable Hand Torque Screwdrivers and Torque Wrenches
Std Service
Rush Service *
Sales Description
Item # 990607 990608 990609 990610
Price
Item # 990632 990633 990634 990635
Price
ISO17025 Calibration - Adjustable or Dial Wrench & Screwdriver (0 - 50 lbf.ft) ISO17025 Calibration - Adjustable or Dial Wrench (51 - 250 lbf.ft) ISO17025 Calibration - Adjustable or Dial Wrench (251 - 1000 lbf.ft) ISO17025 Calibration - Adjustable or Dial Wrench (1001 - 2500 lbf.ft)
$190.00 $270.00 $370.00 $725.00
$285.00 $365.00 $540.00 $895.00
Electric and Air Screwdrivers & Pulse Tools
Std Service
Rush Service *
Sales Description
Item # 990604 990605 990606
Price
Item # 990629 990630 990631
Price
ISO17025 Calibration - Electric or Air Screwdriver & Pulse Tool (0 - 50 lbf.ft)
$190.00 $280.00 $370.00
$285.00 $375.00 $540.00
ISO17025 Calibration - Pulse Tool (51 - 250 lbf.ft) ISO17025 Calibration - Pulse Tool (251 - 1000 lbf.ft)
Electronic/Digital Wrench
Std Service
Rush Service *
Sales Description
Item # 990611 990612 990613 990614
Price
Item # 990636 990637 990638 990639
Price
ISO17025 Calibration - Electronic Wrench (0 - 50 lbf.ft) ISO17025 Calibration - Electronic Wrench (51 - 250 lbf.ft) ISO17025 Calibration - Electronic Wrench (251 - 1000 lbf.ft) ISO17025 Calibration - Electronic Wrench (1001 - 2500 lbf.ft)
$290.00 $425.00 $550.00
$375.00 $520.00 $720.00
$1,095.00
$1,265.00
Torque Analyzers & Sensors (Mechanical & Electronic) - CW direction
Std Service
Rush Service *
Sales Description
Item # 990767 990768 990769 990770 990771 990772
Price
Item # 990773 990774 990775 990776 990777 990778
Price
ISO17025 Calibration - Torque Analyzers or Sensors (0 - 50 lbf.ft) for CW only ISO17025 Calibration - Torque Analyzers or Sensors (51 - 250 lbf.ft) for CW only ISO17025 Calibration - Torque Analyzers or Sensors (251 - 1000 lbf.ft) for CW only ISO17025 Calibration - Torque Analyzers or Sensors (1001 - 5000 lbf.ft) for CW only ISO17025 Calibration - Torque Analyzers or Sensors (5001 - 10000 lbf.ft) for CW only ISO17025 Calibration - Torque Analyzers or Sensors (10001 - 20000 lbf.ft) for CW only
$375.00 $450.00 $525.00 $705.00
$540.00 $615.00 $690.00
$1,020.00 $1,365.00 $1,705.00
$1,050.00 $1,410.00
Torque Analyzers & Sensors (Mechanical & Electronic) - CW & CCW direction
Std Service
Rush Service *
Sales Description
Item # 990619 990620 990621 990622 990623 990624
Price
Item # 990644 990645 990646 990647 990648 990649
Price
ISO17025 Calibration - Torque Analyzers or Sensors (0 - 50 lbf.ft) ISO17025 Calibration - Torque Analyzers or Sensors (51 - 250 lbf.ft) ISO17025 Calibration - Torque Analyzers or Sensors (251 - 1000 lbf.ft) ISO17025 Calibration - Torque Analyzers or Sensors (1001 - 5000 lbf.ft) ISO17025 Calibration - Torque Analyzers or Sensors (5001 - 10000 lbf.ft) ISO17025 Calibration - Torque Analyzers or Sensors (10001 - 20000 lbf.ft)
$625.00 $750.00 $875.00
$895.00
$1,020.00 $1,145.00 $1,695.00 $2,270.00 $2,840.00
$1,175.00 $1,750.00 $2,350.00
Page | 6
Mountz - “The Torque Tool Specialists ® ”
January 1, 2024
CALIBRATION PRICE SHEET
ISO17025 Calibrations
Torque Multipliers (Hand & Power**) (** Includes torque reference chart)
Std Service
Rush Service *
Sales Description
Item # 990615 990616 990617 990618 990650
Price
Item # 990640 990641 990642 990643 990650
Price
ISO17025 Calibration - Hand, Pneumatic or Electric Torque Multipliers (0 - 1000 lbf.ft) ISO17025 Calibration - Hand, Pneumatic or Electric Torque Multipliers (1001 - 2500 lbf.ft) ISO17025 Calibration - Hand, Pneumatic or Electric Torque Multipliers (2501 - 5000 lbf.ft) ISO17025 Calibration - Hand, Pneumatic or Electric Torque Multipliers (5001 - 7500 lbf.ft) ISO17025 Calibration - Hand, Pneumatic or Electric Torque Multipliers (7501-10,000 lbf.ft)
$525.00 $675.00 $975.00
$795.00 $945.00
$1,245.00 $1,470.00 $1,745.00
$1,200.00 $1,475.00
Note: Our (Std) standard service provides a turnaround time of 5 working days from the time we receive the tool. A 48-hour rush service is available, at an additional charge, for your urgent calibration needs.
CALIBRATION PRICE SHEET
Non-Accredited Calibrations
Preset Hand Torque Screwdrivers and Torque Wrenches
Std Service
Rush Service *
Sales Description
Item # 990700 990701 990702 990703
Price
Item # 990734 990735 990736 990737
Price
Non-accredited Calibration - Preset Wrench or Screwdriver (0 - 50 lbf.ft) Non-accredited Calibration - Preset Wrench (51 - 250 lbf.ft) Non-accredited Calibration - Preset Wrench (251 - 1000 lbf.ft) Non-accredited Calibration - Preset Wrench (1001 - 2500 lbf.ft)
$80.00 $110.00 $140.00 $230.00
$175.00 $205.00 $310.00 $400.00
Adjustable Hand Torque Screwdrivers and Torque Wrenches
Std Service
Rush Service *
Sales Description
Item # 990707 990708 990709 990710
Price
Item # 990741 990742 990743 990744
Price
Non-accredited Calibration - Adjustable or Dial Wrench & Screwdriver (0 - 50 lbf.ft) Non-accredited Calibration - Adjustable or Dial Wrench (51 - 250 lbf.ft) Non-accredited Calibration - Adjustable or Dial Wrench (251 - 1000 lbf.ft) Non-accredited Calibration - Adjustable or Dial Wrench (1001 - 2500 lbf.ft)
$110.00 $150.00 $190.00 $370.00
$205.00 $245.00 $360.00 $540.00
Electric and Air Screwdrivers & Pulse Tools
Std Service
Rush Service *
Sales Description
Item # 990704 990705 990706
Price
Item # 990738 990739 990740
Price
Non-accredited Calibration - Electric or Air Screwdriver & Pulse Tool (0 - 50 lbf.ft)
$110.00 $150.00 $190.00
$205.00 $245.00 $360.00
Non-accredited Calibration - Pulse Tool (51 - 250 lbf.ft) Non-accredited Calibration - Pulse Tool (251 - 1000 lbf.ft)
Electronic/Digital Wrench
Std Service
Rush Service *
Sales Description
Item # 990711 990712 990713 990714
Price
Item # 990745 990746 990747 990748
Price
Non-accredited Calibration - Electronic Wrench (0 - 50 lbf.ft) Non-accredited Calibration - Electronic Wrench (51 - 250 lbf.ft) Non-accredited Calibration - Electronic Wrench (251 - 1000 lbf.ft) Non-accredited Calibration - Electronic Wrench (1001 - 2500 lbf.ft)
$150.00 $210.00 $280.00 $550.00
$245.00 $305.00 $450.00 $720.00
Page | 7
Mountz - “The Torque Tool Specialists ® ”
January 1, 2024
CALIBRATION PRICE SHEET
Non-Accredited Calibrations
Torque Multipliers (Hand & Power**) (** Includes torque reference chart)
Std Service
Rush Service *
Sales Description
Item # 990715 990716 990717 990718 990780
Price
Item # 990749 990750 990751 990752 990779
Price
Non-accredited Calibration - Hand, Pneumatic or Electric Multipliers (0 - 1000 lbf.ft) Non-accredited Calibration - Hand, Pneumatic or Electric Multipliers (1001 - 2500 lbf.ft) Non-accredited Calibration - Hand, Pneumatic or Electric Multipliers (2501 - 5000 lbf.ft) Non-accredited Calibration - Hand, Pneumatic or Electric Multipliers (5001 - 7500 lbf.ft) Non-accredited Calibration Hand, Pneumatic or Electric Multipliers (7501-10,000 lbf.ft)
$275.00 $355.00 $480.00 $595.00 $725.00
$545.00 $625.00 $750.00 $865.00 $995.00
Note: Our (Std) standard service provides a turnaround time of 5 working days from the time we receive the tool. A 48-hour rush service is available, at an additional charge, for your urgent calibration needs.
Torque Analyzers & Sensors (Mechanical & Electronic) - CW direction
Std Service
Rush Service *
Sales Description
Item # 990719 990720 990721 990722 990723 990724
Price
Item # 990753 990754 990755 990756 990757 990758
Price
Non-accredited Calibration - Torque Analyzers or Sensors (0 - 50 lbf.ft) for CW only Non-accredited Calibration - Torque Analyzers or Sensors (51 - 250 lbf.ft) for CW only Non-accredited Calibration - Torque Analyzers or Sensors (251 - 1000 lbf.ft) for CW only Non-accredited Calibration - Torque Analyzers or Sensors (1001 - 5000 lbf.ft) for CW only Non-accredited Calibration - Torque Analyzers or Sensors (5001 - 10000 lbf.ft) for CW only Non-accredited Calibration - Torque Analyzers or Sensors (10001 - 20000 lbf.ft) for CW only
$310.00 $385.00 $435.00 $580.00 $875.00
$580.00 $655.00 $705.00
$1,100.00 $1,395.00 $1,700.00
$1,180.00
Torque Analyzers & Sensors (Mechanical & Electronic) - CW & CCW direction
Std Service
Rush Service *
Sales Description
Item # 990725 990726 990727 990728 990729
Price
Item # 990759 990760 990761 990762 990763 990764
Price
Non-accredited Calibration - Torque Analyzers or Sensors (0 - 50 lbf.ft) for CW & CCW Non-accredited Calibration - Torque Analyzers or Sensors (51 - 250 lbf.ft) for CW & CCW Non-accredited Calibration - Torque Analyzers or Sensors (251 - 1000 lbf.ft) for CW & CCW Non-accredited Calibration - Torque Analyzers or Sensors (1001 - 5000 lbf.ft) for CW & CCW Non-accredited Calibration - Torque Analyzers or Sensors (5001 - 10000 lbf.ft) for CW & CCW
$460.00 $580.00 $660.00 $880.00
$730.00 $850.00 $930.00
$1,400.00 $1,845.00 $2,295.00
$1,325.00 $1,775.00
Non-accredited Calibration - Torque Analyzers or Sensors (10001 - 20000 lbf.ft) for CW & CCW 990730
Torque Analyzer: PTT-Series
Std Service
Rush Service *
Sales Description
Item # 990765
Price
Item # 990766
Price
Non-accredited Calibration - Torque Analyzers (PTT-Series)
$85.00
$180.00
Calibration Equipment - Segment and Wheel
Std Service
Sales Description
Item # 990731 990732 990733
Price
Non-accredited Calibration - Calibration Wheel 1 - 4 inch Non-accredited Calibration - Calibration Segment Arm 10 - 24 inch Non-accredited Calibration - Calibration Segment Arm 48 inch
$385.00 $560.00 $800.00
Note: Our (Std) standard service provides a turnaround time of 5 working days from the time we receive the tool. A 48-hour rush service is available, at an additional charge, for your urgent calibration needs.
Rush service is not available for calibration segment arm or wheel products.
Page | 8
Mountz - “The Torque Tool Specialists ® ”
January 1, 2024
Calibration Certificate Modification Request to modify a calibration certificate is $20.00 fee (Item # 990059). The fee applies to both ISO and Non-accredited calibration certificates. A calibration certificate cannot be changed once the original calibration is out of date.
CALIBRATION VOUCHERS FOR ISO17025 CERTIFICATIONS
Save 20% by purchasing a calibration voucher now a torque tool's future ISO17025 recalibration.
Preset Hand Torque Screwdrivers and Torque Wrenches ForStandard 5-Day Service
Sales Description
Item # 990025 990026 990027
Price
Calibration Voucher for ISO17025 Cert - Preset Screwdriver or Wrench (0 - 50 lbf.ft) Calibration Voucher for ISO17025 Cert - Preset Wrench (51 - 250 lbf.ft) Calibration Voucher for ISO17025 Cert - Preset Wrench (251 - 1,000 lbf.ft)
$112.00 $152.00 $200.00
Adjustable Hand Torque Screwdrivers and Torque Wrenches For Standard 5-Day Service
Sales Description
Item # 990028 990029 990030
Price
Calibration Voucher for ISO17025 Cert - Adjustable Screwdriver or Wrench (0 - 50 lbf.ft) Calibration Voucher for ISO17025 Cert - Adjustable Wrench (51 - 250 lbf.ft) Calibration Voucher for ISO17025 Cert - Adjustable Wrench (251 - 1,000 lbf.ft)
$152.00 $216.00 $296.00
Electric and Air Screwdrivers & Pulse Tools For Standard 5-Day Service
Sales Description
Item # 990031 990032 990033
Price
Calibration Voucher for ISO17025 Cert - Pulse, Electric or Pneumatic Screwdriver (0 - 50 lbf.ft)
$152.00 $224.00 $296.00
Calibration Voucher for ISO17025 Cert - Pulse Tool (51 - 250 lbf.ft) Calibration Voucher for ISO17025 Cert - Pulse Tool (251 - 500 lbf.ft)
Torque Analyzers & Sensors (Mechanical & Electronic) For Standard 5-Day Service
Sales Description
Item # 990023 990021 990022 990015
Price
Calibration Voucher for SO17025 Cert - Torque Analyzer & Sensors (0 - 50 lbf.ft) Calibration Voucher for ISO17025 Cert - Torque Analyzer & Sensors (51 - 250 lbf.ft) Calibration Voucher for ISO17025 Cert - Torque Analyzer & Sensors (251 - 1,000 lbf.ft) Calibration Voucher for ISO17025 Cert - Torque Analyzer & Sensors (1,001 - 5,000 lbf.ft)
$500.00 $600.00 $700.00 $940.00
For customers that want to a purchase pre-calibration voucher for a torque sensor or torque tester that is already located at their facility, we would need the following information is required to create a voucher:
1. Sales Order Number 2. Serial number 3. Cal ID number
Page | 9
Mountz - “The Torque Tool Specialists ® ”
January 1, 2024
DECLARATION OF CONFORMANCE (DOC)
All preset products not requiring a torque preset at the time of purchase will be accompanied by a Declaration of Conformance (DOC). The DOC is compliant with ISO6789:2017-part 1 and demonstrates the tool's ability to meet the minimum torque delivery specified by the manufacturer. The default units are those specified for the item purchased.
REPAIR SERVICES
Our standard service provides an estimate of repair costs submitted for customer approval within 5 working days of receiving the tool for repair, 2 days if rush service is requested. Turnaround time for repairs is subject to repair parts availability. Tools estimated for repair by Mountz, but not approved by the customer are subject to an inspection fee.
Service Labor
$155.00 / hour $80.00 / tool
Inspection fee
VALUE ADDED SERVICES
SCREW PRESENTER ADJUSTMENT & SETTING FEE Item Number: 990050 Charge: $75.00
CALIBRATION AND SERVICE CENTERS
Mountz Inc. features an experienced calibration and repair staff. Our trained technicians can calibrate and repair most any tool. Mountz provides rapid service with quality that you can trust. Mountz is an ISO 9001 & ISO 17025 company.
Tool Services Our calibration standards are traceable to NIST (National Institute of Standards and Technology). Mountz factory service provides current upgrades for all digital torque analyzers at time of service. Our calibration labs can calibrate up to 20,000 lbf.ft
Tool Service & Repair Capability
Torque Wrenches: Click, Dial, Beam, Cam-Over & Break-Over
Torque Screwdrivers: Dial, Micrometer, Preset & Adjustable
Torque Analyzers/Sensors: All brands
Mountz Service Locations
Electric Screwdrivers: All brands
Eastern Service Center 19051 Underwood Rd. Foley, AL 36535 Phone: (251) 943-4125 Fax: (251) 943-4979
Western Service Center 1080 N.11th Street San Jose, CA 95112 Phone: (408) 292-2214 Fax: (408) 292-2733
Air Tools: All brands Impact Wrenches, Drills, Pulse Tools, Grinders, Percussive Tools, Air Screwdrivers, Nutrunners, DC Controlled Nutrunners
UK Service Center Pier Copse Courtyard, Milland Lane, Liphook, Hampshire, GU30 7JN, UK Phone: 00 44 1428 741756
Page | 10
Mountz - “The Torque Tool Specialists ® ”
January 1, 2024
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10Made with FlippingBook Annual report maker