TECHNICAL SPECIFICATIONS
The modular wardrobes are fully fitted with a top shelf and hanging rail.
09. CLIMATE CONTROL AND HOT WATER The properties will be delivered with the preinstallation of climate control systems based on conduits with grilles in the bedrooms and living rooms. The hot water is supplied from the installed solar panels supporting an electric boiler. 10. HYGRO-ADJUSTABLE CONTROLLED MECHANICAL VENTILATION The controlled mechanical ventilation system guarantees indoor air quality by renewing stale air inside the properties continuously and in a controlled manner. The system is based on the air sweeping principle inside the properties, from the dry rooms (bedrooms and living room) to the wet rooms (kitchen and bathrooms). Because the system is fitted with grilles, the ventilation flow is automatically adapted to the needs of the occupants in each space based on the humidity level, providing a higher level of comfort and energy savings for the climate control systems.
07. INTERIOR LAYOUT The interior partition walls between the different rooms in the house are made from laminated plasterboard over an intermediate steel structure on both sides and thermal-acoustic interior insulation. This means that the construction system is eco-efficient and sustainable. The laminated plasterboard face protection using multi-layer cellulose provides greater strength than anything based on traditional plastering. The result is hygroscopic and acts like a “third skin” to combat damp, absorbing it when the air is excessively humid and expelling it when the air is dry. 08. INTERIOR CLADDING Floors: Interiors in rectified porcelain stoneware floor tiles. Ceilings: Dropped ceiling in bathrooms and/or toilets for preinstallation of air conditioning equipment and ventilation system maintenance. Dropped laminated plasterboard ceiling throughout the interior (except bathrooms and toilets), finished with smooth plastic paint. For the exteriors, a continuous dropped ceiling for outdoor areas in laminated cement painted in premium anti-mould plastic paint with a matt finish. Walls: In the kitchen, compact slab cladding between worktop and upper furniture. The bathroom and toilet walls are covered in designer stoneware material around the bath tub or shower, as appropriate, in combination with other materials. The walls are covered with smooth plastic paint.
01. FOUNDATIONS AND STRUCTURE Concrete slab foundations and metal pillars to support the house. The structure is made from steel beams and concrete slabs, with support sheeting and metal pillars. 02. ROOF Non-trafficable flat roof, waterproofed using sheets of exposed PVC over geotextile and rigid insulation. 03. FAÇADE The exterior façades are made from panels and steel profiles with an exterior heat insulation system and finished with acrylic cladding. The interior is finished with laminated plasterboard. The heat insulation for the exterior is based on covering the façade with insulating panels to create a shield that prevents heat egress in winter and heat ingress in summer, thereby achieving maximum energy savings for your heating and air conditioning. The reduced use of energy directly lowers CO2 emissions into the atmosphere, while the optimal heat performance by the property provides inhabitants with a comfortable and healthy environment. 04. TERRACES The property’s terrace will be tiled using stone tiles suitable for outdoor use. A glass safety railing will be installed.
profiles. The windows can be sliding, tilting or folding, depending on each specific design. The rolling shutters are made from aluminium with thermal insulation. The windows are low-E double-glazing. The main advantage of Low Emissive glazing is the improved energy efficiency it provides, reducing your heating and air conditioning bills. They minimise heat loss from the property because they reflect part of the energy produced by the heating system and return it to the indoor environ- ment.
Furthermore, they also offer extraordinary natural light transition properties that add to a perfect combination between heat energy savings and harnessing the light from outside. Low Emissive glazing reduces heat loss in winter and a solar factor control layer is added for south-facing properties in order to minimise the heat transfer effect to the interior by reflecting part of the incoming energy. 06. INTERIOR JOINERY The main door to the property is reinforced and fitted with a safety lock. High standard interior hinged doors made from white lacquered MDF, with smooth MDF flashing in the same colour. MDF skirting board finished in white melamine.
The benefits for the property are numerous as it guarantees proper indoor air quality by constantly renewing the atmosphere and removing the stale air while also eliminating exterior noise because there is no need to open windows for ventilation.
05. EXTERIOR JOINERY The exterior joinery consists of thermal break aluminium
Made with FlippingBook - professional solution for displaying marketing and sales documents online