Piastrelle pressate a secco - Conforme alla norma EN 14411 e ISO 13006 appendice G gruppo B1-a con E ≤ 0,5% / Dry pressed tiles - Compliant with standards EN 14411 and ISO 13006 annex G group B1-a with E ≤ 0,5% / Carreau pressé à sec - Conforme à la norme EN 14411 et ISO 13006 annexe g groupe B1-a avec E ≤ 0,5% / Trocken gepresste Fliesen - Erfüllen die Anforderungen der Norm en 14411 und ISO 13006 Anhang g Gruppe B1-a mit E ≤ 0,5% / Baldosas prensadas en seco - Conforme a las normas en 14411 e iso 13006, anexo g grupo B1-a con E ≤ 0,5 %
Informazioni tecniche Technical information
Ceramiche Keope si riserva il diritto di apportare in qualsiasi momento modifiche o variazioni a quanto descritto in questo documento. Per un puntuale aggiornamento delle specifiche tecniche fare riferimento al sito keope.com | Ceramiche Keope reserves the right to modify the above specifications at any time without notice. / Ceramiche Keope se réserve le droit d’apporter à tout moment des modifications ou des variations à la descriptions contenue dans ce document. / Ceramiche Keope behält sich das Recht vor, die oben genannten Spezifikationen jederzeit ohne Vorankündigung zu ändern / Ceramiche Keope se reserva el derecho de modificar o variar en cualquier momento el contenido de ste documento.
Caratteristiche tecniche Technical characteristics
Norma o metodo Norms
Requisiti prescritti Required values
Valore medio Average value
Rispetto alla misura nominale N 7cm ≤ N < 15 cm N ≥ 15 cm
RT
± 0,4 mm
± 0,3 %
± 1,0 mm
Lunghezza e Larghezza Lenght and Width
Conforme Compliant
NO RT
± 0,9 mm
± 0,6 %
± 2,0 mm
RT
± 0,4 mm
± 0,3 %
± 0,8 mm
Rettilineità degli spigoli Straightness of sides
Conforme Compliant
NO RT
± 0,8 mm
± 0,5 %
± 1,5 mm
RT
± 0,4 mm
± 0,3 %
± 1,5 mm
Ortogonalità Rectangularity
Conforme Compliant
ISO 10545-2
NO RT
± 0,8 mm
± 0,5 %
± 2,0 mm
RT
± 0,6 mm
± 0,4 %
± 1,8 mm
Planarità Flatness
Conforme Compliant
NO RT
± 0,8 mm
± 0,5 %
± 2,0 mm
Rispetto allo spessore nominale
Spessore Thickness
Conforme Compliant
± 0,5 mm
± 5,0 %
± 0,5 mm
Assorbimento acqua Water Absorption
≤ 0,1 %
ISO 10545-3
≤ 0,5 %
6 mm R ≥ 40 N/mm 2 S ≥ 1000 N
9 mm R ≥ 40 N/mm 2 S ≥ 1500 N
20 mm R ≥ 45 N/mm 2 S ≥ 10000 N
R ≥ 35 N/mm 2 S ≥ 700 N (< 7,5 mm) S ≥ 1300 N (≥ 7,5 mm)
Resistenza alla flessione e rottura Bending and breaking strenght
ISO 10545-4
Resistenza all’abrasione profonda (UGL) Deep abrasion resistance
≤ 150 mm 3
ISO 10545-6
≤ 175 mm 3
Resistenza all’abrasione superficiale (GL) Deep abrasion resistance
Test disponibile su richiesta Test available upon request
Secondo la classificazione indicata dal fabbricante Manufactured to state classification
ISO 10545-7
Resistenza agli shock termici Thermal shock resistance
Resistente Resistant
In accordo con la EN ISO 51045-1 (ISO 13006: metodo di prova disponibile) | In accordance with EN ISO 51045-1 (ISO 13006: test method available)
ISO 10545-9
Resistenza al gelo Frost resistance
Resistente (ingelivo) Resistant (frost proof)
In accordo con la EN ISO 51045-1 (ISO 13006: richiesta) In accordance with EN ISO 51045-1 (ISO 13006: richiesta)
ISO 10545-12
Prodotti uso domestico e additivi per piscine Household chemicals and swimming pool salts: min B Acidi e alcali a basse concentrazioni | Low concentrations of acids and alkalis: Valore indicato dal fabbricante | Manufactured to state classification Acidi e alcali ad alte concentrazioni | High concentrations of acids and alkalis: Valore indicato dal fabbricante | Manufactured to state
Resistenza chimica Chemical resistance
Conforme Compliant
Conforme Compliant
UGL
ISO 10545-13
GL (Lappato)
UGL Valore indicato dal fabbricante | Manufactured to state classification
Resistenza alle macchie Stain resistance
Conforme Compliant
ISO 10545-14
GL Classe 3 minima | Minimum class 3
ULTRAmatt R11 Grip R11 Structured R11
ULTRAmatt R11 Grip R11 Structured R11
Lappato / Glossy
Silky
ULTRAsilky
Natural R9
Resistenza allo scivolamento Slip resistance
DIN EN 16165 Anx A (ex DIN 51097)
In funzione dell’ambiente o della zona di lavoro Based on environment or on the working area
-
-
-
A
A+B
A+B+C
Resistenza allo scivolamento Slip resistance
DIN EN 16165 Anx B (ex DIN 51130)
In funzione dell’ambiente o della zona di lavoro Based on environment or on the working area
-
-
-
R9
R10
R11
Resistenza allo scivolamento Slip resistance
DIN EN 16165 Anx C (ex Pendulum)
Bassa potenzialità di scivolamento | Low slip risk PTV ≥ 36 asciutto e bagnato | PTV ≥ 36 dry and wet
≥ 36 dry ≥ 36 wet
≥ 36 dry ≥ 36 wet
Test disponibile su richiesta Test available upon request
-
-
-
Coefficiente di attrito dinamico Dynamic friction coefficient
D.M.I. Giugno 1989 n. 236 (µ > 0,40)
> 0,40 dry > 0,40 wet
> 0,40 dry > 0,40 wet
> 0,40 dry > 0,40 wet
B.C.R.A
-
-
-
Coefficiente di attrito dinamico Dynamic friction coefficient
ANSI A326.3 (D.C.O.F)
In funzione dell’ambiente o della zona di lavoro Based on environment or on the working area
Test disponibile su richiesta Test available upon request
Test disponibile su richiesta Test available upon request
wet D.C.O.F. ≥ 0,42
wet D.C.O.F. ≥ 0,50
wet D.C.O.F. ≥ 0,55
-
Per i certificati specifici contattare Ceramiche Keope | For specific certificates contact Ceramiche Keope / Pour le certificats spécifique, veuillez contacter Ceramiche Keope Fur die speziellen Zertifikate wenden Sie sich bitte an Ceramiche Keope / Para los certificados especificos, contactar Ceramiche Keope.
122
123
Made with FlippingBook Ebook Creator