The adjustable suction power means that the PLANEX holds its own weight against the wall and ceiling – helps to reduce the load on the arms and back d u ring all sanding work.
LHS 2 225 Accessories
Sander Backing Pad For PLANEX LHS 2 225 EQ(I); not suitable for PLANEX LHS 225 EQ, not suitable for PLANEX LHS-E 225 EQ. For creating a perfect and scratch-free surface; the sanding pad may only be used if the IP-STF-D220/48-LHS 2 225 interface pad is fastened. Including interface pad Interface Sander Backing Pad For PLANEX LHS 2 225 EQ(I); not suitable for PLANEX LHS 225 EQ, not suitable for PLANEX LHS-E 225 EQ. StickFix hook-and-loop surface for securing and quickly changing abrasives; must be used in conjunction with the ST-D220/48-LHS 2 225 sanding pad; can be attached to the sanding pad with eight plastic screws supplied; easy to screw in the screws using a second screw or coin (no screwdriver is required). Including eight plastic screws Guide Extension For PLANEX LHS 2 225 EQ(I); not suitable for PLANEX LHS 225 EQ, not suitable for PLANEX LHS-E 225 EQ. Quick extension of the LHS 2 225 long-reach sander by 17-13/32” (450 mm); a maximum of two guide extensions can be used at the same time (one is already included in the scope of delivery of the PLANEX LHS 2 225). Hose clip For securing the suction hose and cable on either the left hand or right hand T-handle end of the PLANEX LHS 2 225; for a trouble free handle area when sanding ceilings
205415
205418
577112
205417
Tool Holder For CT 36 AC
With practical carrier handle; storage space for abrasives, interface pads and other small parts; easy to attach to Festool extractors with T-LOC or SYS-dock; fits all PLANEX long-reach sanders.
205274
Made with FlippingBook - Online catalogs