Drain Cleaners
Mustang Style Nozzles
Compressor 1/8”
Compressor Bullet 1/8”
Bandit 1/8”
Compressor: Compact design to negotiate its way through tight bends
Designed to enter blockage quickly with max. thrust. 6 Rear Jets at a tight angle and one front jet
Blank 165 BA4 $24 C
Nozzle Only Inlet: 1/8” BSP F
With Cone & Plug Inlet: QC 1/4” Plug
With Bandit Inlet: QC 1/4” Plug
With Cone & Plug Inlet: QC 1/4” Plug
Nozzle Only
Nozzle Only
6 Rear - 1 Forward
6 Rear - 1 Forward
3 Rear 30º + 3 Rear 45º - 1 Forward
165 C6R1F
$50 C 165 C6R1FC $192 C 165 C6R1F
165 B6R1FB
$poa 165 BT6R1F 1/4 1/4” $128 C 165 BT6R1FC 1/4 1/4” $175 C
165 B6R1FC
$74 C 165 BT6R1F 10 3/8” $151 C 165 BT6R1FC 3/8 3/8” $138 C 165 BT6R1F 1/2 1/2” $188 C n/a
3 Rear - 1 Forward
3 Rear - 1 Forward
165 C3R1F
$59 C 165 C3R1FC $136 C 165 C3R1F
165 B3R1FC $140 C
165 C3R1F-X $29 C 165 C3R1FC-X
$46 165 C3R1F-E 165 B3R1FC-E $poa
6 Rear - 0 Forward
6 Rear - 0 Forward
165 C6R
$56 C 165 C6RC
$138 C 165 C6R
165 B6RC
$165 C
165 CA8 $22 C - 1/4” X 1/8” Compressor Adaptor Used to join the Compressor to a 1/4” male hose tail
Ferret
Grease Ball
Side Cutter Predator
Sidecutter Bandit
2 offset forward facing jets that help penetrate at the front. Also 3 rear jets on the side and 3 jets at the back of the nozzle. Has reduced thrust due to 2 front jets
The Grease ball is totally spherical with 8 rear thrusting jets only. Designed for extreme thrust & the ability to descale grease/pipe sidewalls
Predator with screwdriver tip 3R1F 1/4” Inlet, to fit jetters to 5,000 psi form 18 to 25 L/min This nozzle cuts from the front blade, the side blasde & the rear jets
Bandit 6R Thruster 1/4” Inlet, to fit jetters to 5,000 psi form 18 to 25 L/min This nozzle cuts from the front blade, the side blasde & the rear jets
Part #
List
Part #
List
Part #
List
Part #
List
165 GB8R
$103 C
165 FT6R2F
$174 C
165 SCP3R1F
$186 C
165 SCB6R
$146 C
165 GB8-M
$120 C
165 FT6R2FC
$218 C
165 SCP3R1F-BA8
$198 C
165 SCB6RC
$182 C
165 GB8C
$141 C
JetEx Turbo
JetAxe 6R1F
This nozzle works on a standard jetter from 18 lpm up and features a front turbo jet nozzle and 5 rear thrusting jets. It pulls really hard through a standard jetter and a remote mini reel. 1/4” BSPF - Brass and ceramic construction. Note: This model does not come with a quick connect tail.
The Jetaxe Nozzle is an awesome nozzle for those really tough blockages. We have used the same rear jet configuration as the Grease Ball nozzle giving it extreme thrust with a tight 20 degree rear jet angle. The 6R1F model has one straight jet drilled at .6 mm allowing it to break up debris with both the blade and the jet and has very similar thrust characteristics. The 8 rear no front jet model concentrates on pure thrust letting the axe head do all the work! This model has 6 rear jets with one front jet but no cone or tail. Size 1/4” F BSP
165 JEX8
$255 B (Full range on Page 198)
165 JA6R1F
$140 C
Indicative prices only, excludes GST & Freight
207
Made with FlippingBook - Online magazine maker