Pump/Engine Oils
Pump Oil
Pump Care Program
Pump Oil - BE
1. Change oil after the first 50 hours of operatrion 2. Then change every 3 months 3. Fill oil halfway on the indicator sight glass 4. DO NOT OVERFILL 5. Only use 30W, non foaming, non detergent pump oil
Ideal for high pressure pumps Non Detergent & Non Foaming
Part #
Volume
List
125 85.490.000
Pump Oil - 1 Litre
$17 D
125 85.490.001
Pump Oil - 12 Pack
$170 D
125 85.490.013
Pump Oil - 4 Litre
$67 C
Pump Oil - Cat
Pump Oil - Comet
Pump Oil - General Pump
Suits CAT Pumps Non Detergent & Non Foaming Bottle Size 600ml
Suits COMET Pumps Non Detergent & Non Foaming Bottle Size 600ml
Suits GENERAL PUMP Pumps Non Detergent & Non Foaming Bottle Size 500ml
Part #
Volume
List
Part #
Volume
List
Part #
Volume
List
225 6107
Pump Oil
$23 C
115 5000XXXX
Pump Oil
222 6000XXXX
Pump Oil
Which Oil?
Comet
Universal Tractor Transmission Oil (U.T.T.O) Examples – Shell Donax TD - Mobil Multifluid 422
HPP
Varies per model – See oil spec on pump name plate
Cat Pumps
ISO-68 Crankcase Oil (All models except R- Series)
Bertolini
SAE 75W-90 Examples – CASTROL TAF-X 75W-90 - VALVOLINE SYNPOWER GEAR OIL 75W-90 Suits – Series - WJC-U_WB_WM_TM_TT_KT_KK_HD_RA_RB, C300 , CX
Interpump
SAE 15 W-40 MINERAL - ISO VG100 DIN 51524 – Suits all models according to their “ Generic manual”
Annovi Reverberi – Plunger
SAE 30W non detergent - Suits – XMV, XRV ,XTV ,RKV, RK
Annovi Reverberi – Axial
10W30 synthetic or 20W40 syntetic Best oil recommended is Shell Spyrex “S” Synthetic 75W90
Hawk Pumps
SAE 10W-40 multi-grade (can use either mineral or synthetic oils)
The viscosity rating is very important for identifying whether an oil is suitable for specific operating conditions: oils with a high viscosity rating are ideal for use in summer, whereas oils with lower viscosity ratings are best in winter. Multi grade oils are capable of adapting and their operating range is described by two numbers: the cold temperature viscosity and the hot temperature viscosity. Leuco S.p.A. recommends using SAE 10W-40 multi grade oils with its pumps.
The code for multi grade oils consists of two numbers separated by a “W”: the first number shows the low temperature rating and the second number is the high temperature rating. Multi grade oils help cold starts: their fluidity at low temperatures facilitates cold starts and safeguards the lubricating film even during the critical pump start-up phase.
The maximum hot temperature is 100°C. This temperature was originally chosen to represent the oil temperature and is still used to define SAE ratings. However, developments in engine technology mean that oil temperatures can now reach significantly higher values (150°C or more).
423
Indicative prices only, excludes GST & Freight
Made with FlippingBook - Online magazine maker