Tank Cleaning Heads
Barrel Cleaning
Barrel Cleaning Head M25E
The M25E tank cleaning head is ideal for cleaning all types of drums and barrels. It washes and, at the same time, siphons off the water used during the cleaning process. Features complete orbital coverage of all internal surfaces using high pressure flow and an overall lower water consumption. Built in high quality stainless steel, with a small spray turret to fit small barrel and tank openings.
Specifications: Flow:
From 10 to 25 l/min. 2000 Psi (2000 max)
Operating Pressure:
Temperature:
90°C
Cleans Barrel Diam:
730mm 332mm
Suction Tube:
Power: Nozzles:
see below 2 X M24 0°
Inlet: M22 AR1 A Box includes set of 020,025,03,035 & 04 nozzles
Power
►
230v or 24v
WITH SUCTION DEVICE TO BRING THE WATER BACK OUT OF THE BARRELL
Part #
Description
List
▲ Water inlet
M21E Barrel Cleaner - Without suction 230V with 12V step down transformer M25E Barrel Cleaner - With suction 230V with 12V step down transformer M25E Barrel Cleaner - With suction 230V with 12V step down transformer M28E Barrel Cleaner - With suction 12V Right angled space saver
145 25.4300.24
$1,746 C
◄ Venturi sucks up water from the barrel
145 25.4350.24
$3,004 C
145 25.4350.25
$2,899 C
145 25.4380.24
$poa
◄ Nozzles (2) doing the cleaning
Suction Tube 145 tba
Suction Tube length
Tube 332mm (for barrels 730mm wide)
$poa C
145 80.0380.00
Tube 532mm (for barrels 940mm wide)
$275 C
145 80.0386.00
Tube 667mm (for barrels 1070mm wide)
$270 C
Water pick up ►
Nozzle change (2 required): Sizes (020) 145 80.0350.51 $6 C, (025) 145 80.0351.51 $6 C, (030) 145 80.0352.51 $6 C, (035) 145 80.0353.51 $6 C, (040) 145 80.0354.51 C
Repair Kit (Seals) M25E 145 25.4360.24 $236 C (Serial numbers above 519) Repair Kit (Seals) M21E 145 25.4308.24 $150 C Parts: Suction Ball 145 80.0330.81 $55 C / Bearing 145 11.4412.28 $83 C Motor 12V 145 13.0827.00 $733 C / Outer Tube 145 80.0018.56 $337 C
Barrel Cleaning Head - Compact XB03
Compact Wine Barrel Cleaning Head (Water Driven): Performance: 150 Bar max @ 30 l/min max Nozzles: 2 or 4 Seals: NBR Material: AISI316
Part #
Description
List
165 XB031AAD-BQ S
Head - Complete 175mm
$4,999 B
165 XB031AAD N4
Head - Complete 400mm
$poa B
165 XB031AAD N75
Head - Complete 750mm
$poa B
Nozzle 4 Spray: 165 DR1252 $184 C, 165 DR1253 $233 C 165 DR1254 $157 C Nozzle Code: ie 1202 = “120” is spray hole diameter, “2” is number holes Parts: Seal Kit: 165 GO0343 $499 C Diffuser:
165 GK0462 suits 15 l/min $588 C, 165 GK0463 suits 18-21 l/min $1,095 C
Gear-4 Kit 165 GK0528 $269 C Gear-3 Kit 165 GK0526 $206 C Thrust Brg 165 GK0156 $329 C
Tube Kit:
165 GJ209100
$1,104 C $127 C $338 C $194 C
Seal Kit Hyd: 165 GK051300 Turbine Kit: 165 GK0372 Thrust Brg: 165 DE0753
Rotating Head
Tarnk Cleaning Head Kit
URF
GR38
Part #
Pressure
In
Out
List
Part #
Pressure
In
Out
List
145 25.1130.00 URF 4000Psi @ 30 l/min 1/4” Npt M 2 x 1/8” Bsp F $99 D 145 25.1170.00 URF 5100Psi @ 80 l/min 1/2” Bsp M 2 x 1/4” Bsp F $poa C 145 26.1400.00 GR38 5100Psi @ 40 l/min 3/8” Bsp M 2 x M12 F $336 C 145 26.1420.00 GR38 GR38 with arm $302 C 145 26.1421.56 GR38 GR38 arm only $293 D
TLR M4 Series 145 25.3610.24 to 2300Psi /35 l/min
1/4” M25x1 M
2 x M4 $poa C
Minimum Inlet: 40.5mm Speed: 18-24 giro/pm Nozzles not included.
Each head jetted to application Coverage: 360º
589
Indicative prices only, excludes GST & Freight
Made with FlippingBook - Online magazine maker