OMNIA IRRIGATION SETS | 11
OMNIRRIGATOR Manual irrigation system with button-driven flow regulator that enables the assistant to keep the operation field clean and further cool the implant site. The system is also suitable for irrigation during final screwing of the implant by means of a dyna- mometric key. The tube fitted with the perforating needle to be inserted into the saline solution bag. The irrigation tube is 200 cm long.
Partcode
Description
Qty
32.F1007.00
Manual irrigation set with button-driven flow regulator
5 pcs
ACCESSORIES FOR MANUAL IRRIGATION Accessories for manual irrigation to complement mechanical irrigation systems. They may be used to customize cooling lines according to your own needs. If a special irrigation line with peristaltic pump block is not available, the system can be composed by combining the items listed below.
Partcode
Description
Qty
32.F0116.00
Perforator for Hand Fuser with female Luer connector
10 pcs
32.F0016.00
Tubing extension with Luer without piercing pin
10 pcs
DETAIL OF THE PERFORATOR
32.F0116.00
The irrigation system 32.F0157.00 is a semi-manual system, which may be connected to the Hand Fuser system through the perforator, or it may be directly connected to the contra-angle through a hook-shaped flow adjuster. The practical sliding button, which must be hooked to the handpiece, allows stopping or adjusting flow strength.
Partcode
Description
Qty
32.F1003.00
Terminal irrigation needle for Omnirrigator, in PVC
50 pcs
32.F0157.00
Manual irrigation set with sliding flow adjuster for contra-angle
10 pcs
Made with FlippingBook Annual report