BIBLIOGRAFIA
1.- Dávila E, Ortiz-Hernandez M, Perez R, Climent M, Cerrolaza M, Gil FJ. Crestal module design optimization of dental implants: finite element analysis and in vivo studies. Journal of Materials Science: Materials in Medicine.2019; 30. 2.- Pérez RA, Gargallo J, Altuna P, Herrero-Climent M, Gil FJ. Fatigue of Narrow Dental Implants: Influence of the Hardening Method. Materials (Basel). 2020 Mar 20;13(6):1429. 3.- Mariano Herrero-Climent, Bernardo Ferreira Lemos, Federico Herrero-Climent, Carlos Falcao, Helder Oliveira, Manuela Herrera, Francisco Javier Gil, Blanca Ríos-Carrasco and José-Vicente Ríos-Santos, Influence of Implant Design and Under-Preparation of the Implant Site on Implant Primary Stability. An In Vitro Study. Int J Environ Res Public Health. 2020;17(12):4436. Published 2020 Jun 20. doi:10.3390/ijerph17124436. 4.- Chávarri-Prado D, Brizuela-Velasco A, Diéguez-Pereira M, Pérez-Pevida E, Jiménez-Garrudo A, Viteri-Agustín I, Estrada-Martínez A, Montalbán-Vadillo O. Influence of cortical bone and implant design in the primary stability of dental implants measured by two different devices of resonance frequency analysis: An in vitro study. J Clin Exp Dent. 2020 Mar 1;12(3):e242-e248. 5.- Albertini M, Fernandez-Yague M, Lázaro P, Herrero-Climent M, Rios-Santos JV, Bullon P, Gil FJ. Advances in surfaces and osseointegration in implantology. Biomimetic surfaces. Med Oral Patol Oral Cir Bucal. 2015 May 1;20(3):e316-25. 6.- Gil FJ, Manzanares N, Badet A, Aparicio C, Ginebra MP. Biomimetic treatment on dental implants for short-term bone regeneration. Clin Oral Investig. 2014 Jan;18(1):59-66. doi: 10.1007/s00784-013-0953-z. Epub 2013 Mar 8. PMID: 23471738. 7.- Herrero-Climent M, Romero Ruiz MM, Calvo PL, Santos JVR, Perez RA, Gil Mur FJ. Effectiveness of a new dental implant bioactive surface: histological and histomorphometric comparative study in minipigs. Clin Oral Investig. 2018 Apr;22(3):1423-1432. 8.- Romero-Ruiz MM, Gil-Mur FJ, Ríos-Santos JV, Lázaro-Calvo P, Ríos-Carrasco B, Herrero-Climent M. Influence of a Novel Surface of Bioactive Implants on Osseointegration: A Comparative and Histomorfometric Correlation and Implant Stability Study in Minipigs. Int J Mol Sci. 2019 May 9;20(9):2307. 9.- Climent M, López-Jarana P, Lemos B, Gil FJ, Costa C, Ríos-Santos J, Rios B.Relevant Design Aspects to Improve the Stability of Titanium Dental Implants. Materials. (2020). 13. 10.- Climent M, Costa C, Gil FJ, Albertini M, Nart J. A Biomimetic Surface for Immediate and Early Loading of Dental Implants Surface Characterization and Results from Histolo - gical Studies. JSM Dental Surgery. 2016. 11.- Climent M, López-Jarana P, Lemos B, Gil FJ, Costa C, Ríos-Santos J, Rios B.Relevant Design Aspects to Improve the Stability of Titanium Dental Implants. Materials. (2020). 13. 12.- Javier Gil F, Planell JA, Padrós A, Aparicio C. The effect of shot blasting and heat treatment on the fatigue behavior of titanium for dental implant applications. Dent Mater. 2007 Apr;23(4):486-91. 13.- Aparicio C, Manero JM, Conde F, Pegueroles M, Planell JA, Vallet-Regí M, Gil FJ. Acceleration of apatite nucleation on microrough bioactive titanium for bone-replacing im- plants. J Biomed Mater Res A. 2007 Sep 1;82(3):521-9. 14.- A. Rodríguez-Hernández, E. Espinar, J.M. Llamas, J.M. Barrera, F.J. Gil. Alumina shot-blasted particles on commercially pure titanium surfaces prevent bacterial attachment. Materials Letters. 2013; 92:42-44. 15.- Oliveira H, Brizuela Velasco A, Ríos-Santos JV, Sánchez Lasheras F, Lemos BF, Gil FJ, Carvalho A, Herrero-Climent M. Effect of Different Implant Designs on Strain and Stress Distribution under Non-Axial Loading: A Three-Dimensional Finite Element Analysis. Int J Environ Res Public Health. 2020 Jul 1;17(13):4738. 16.- Albertini, M.; Herrero-Climent, F.; Díaz-Castro, C.M.; Nart, J.; Fernández-Palacín, A.; Ríos-Santos, J.V.; Herrero-Climent, M. A Radiographic and Clinical Comparison of Immediate vs. Early Loading (4 Weeks) of Implants with a New Thermo-Chemically Treated Surface: A Randomized Clinical Trial. Int. J. Environ. Res. Public Health 2021, 18, 1223. https:// doi.org/10.3390/ijerph18031223. 17.- Chavarri-Prado D, Brizuela-Velasco A, Álvarez-Arenal Á, Dieguez-Pereira M, Pérez-Pevida E, Viteri-Agustín I, Estrada-Martínez A. The Bone Buttress Theory: The Effect of the Mechanical Loading of Bone on the Osseointegration of Dental Implants. Biology (Basel). 2020 Dec 28;10(1):E12. doi: 10.3390/biology10010012. PMID: 33379218. 18.- Ríos-Santos, J.V.; Tello-González, G.; Lázaro-Calvo, P.; Gil Mur, F.J.; Ríos-Carrasco, B.; Fernández-Palacín, A.; Herrero-Climent, M. One Abutment One Time: A Multicenter, Pros- pective, Controlled, Randomized Study. Int. J. Environ. Res. Public Health 2020, 17, 9453. 19.- Lemos, B.F.; Lopez-Jarana, P.; Falcao, C.; Ríos-Carrasco, B.; Gil, J.; Ríos-Santos, J.V.; Herrero-Climent, M. Effects of Different Undersizing Site Preparations on Implant Stability. Int. J. Environ. Res. Public Health 2020, 17, 8965. 11.- Dieguez-Pereira M, Brizuela-Velasco A, Chavarri-Prado D, Perez-Pevida E, deLlanos-Lanchares H, Alvarez-Arenal A. The Utility of Implant-Supported Fixed Dental Prosthesis Material for Implant Micromovement and Peri-implant Bone Microstrain: A Study in Rabbit Tibia. Int J Oral Maxillofac Implants. 2020 Nov/Dec;35(6):1132-1140. doi: 10.11607/ jomi.8094. PMID: 33270053. 12.- Brizuela-Velasco A, Chávarri-Prado D. The functional loading of implants increases their stability: A retrospective clinical study. Clin Implant Dent Relat Res. 2019 Feb;21(1):122- 129. 13.- Chávarri-Prado D, Brizuela-Velasco A, Diéguez-Pereira M, Pérez-Pevida E, Jiménez-Garrudo A, Viteri-Agustín I, Estrada-Martínez A, Montalbán-Vadillo O. Influence of cortical bone and implant design in the primary stability of dental implants measured by two different devices of resonance frequency analysis: An in vitro study. J Clin Exp Dent. 2020 Mar 1;12(3):e242-e248. 14.- Herrero-Climent M, Lázaro P, Vicente Rios J, Lluch S, Marqués M, Guillem-Martí J, Gil FJ. Influence of acid-etching after grit-blasted on osseointegration of titanium dental implants: in vitro and in vivo studies. J Mater Sci Mater Med. 2013 Aug;24(8):2047-55. 15.- Aparicio C, Gil FJ, Fonseca C, Barbosa M, Planell JA. Corrosion behaviour of commercially pure titanium shot blasted with different materials and sizes of shot particles for dental implant applications. Biomaterials. 2003 Jan;24(2):263-73. 16.- F.J Gil, A Padrós, J.M Manero, C Aparicio, M Nilsson, J.A Planell, Growth of bioactive surfaces on titanium and its alloys for orthopaedic and dental implants. Materials Science and Engineering: C. 2002; 22(1):53-60. 17.- Gil FJ, Espinar E, Llamas JM, Sevilla P. Fatigue life of bioactive titanium dental implants treated by means of grit-blasting and thermo-chemical treatment. Clin Implant Dent Relat Res. 2014 Apr;16(2):273-81. 18.- Nogueras-Bayona J, Gil FJ, Salsench J, Martinez-Gomis J. Roughness and bonding strength of bioactive apatite layer on dental implants. Implant Dent. 2004 Jun;13(2):185-9. 19.- E. Espinar, LA. Bravo, M. Pegueroles, FJ. Gil. Roughness and wettability effect on histological and mechanical response of self-drilling orthodontic mini-implants. Clinical Oral Investigations. DOI: 10.1007/s00784-016-1770-y. CLOI-D-15-00254.2. 20.- E. Velasco-Ortega, C.A. Alfonso-Rodríguez, L. Monsalve-Guil, A. España-López, A. Jiménez-Guerra, I. Garzón, M. Alaminos, F.J. Gil. Relevant Aspects In The Surface Properties In Titanium Dental Implants For The Cellular Viability. Materials Science And Engineering C. doi:10.1016 / j.msec.2016.03.049.
29
Made with FlippingBook Annual report