Majestic Mountain Pine Tree
6. Tree Branch Installation Tree branches come in two sizes. Every tree, regardless of size has 6 top branches which are 13” longer than the rest of the tree branches. The 6 top branches can be found in the oversized box that contains the two tree top pieces. Prior to putting any branches on the tree, it’s best to shape each branch on the ground. The branches will need to be shaped adequately so as not to show the tree frame. Additional touch- up shaping is usually required once the branches are on the tree. It can be helpful to have a spotter on the ground watching for areas where more shaping is needed. Ornament Decorating Note: If an ornament package was purchased for the tree, these will need to be added to the branches while still on the ground. Refer to the Ornament Decorating Guide on Page 8-9. Once the branches are shaped and if decorated, ornaments are added, begin attaching the branches to the tree. Begin with the top 6, longer branches. Slide each branch into the receiver hook on the tree frame and plug in the light set to an open outlet on the tree wiring harness.
Top Branch Holder
After the top 6 branches are installed, move down to the next row of hooks and begin installing the regular branches. Work your way around the tree, fully installing an entire row before moving to the next row. Do additional branch shaping as needed as you work your way down the tree.
Regular Branches
Light Check: It is best to have the tree plugged in as you position the branches to insure all sections of the tree light up properly.
7
238 | ChristmasDesigners.com
Made with FlippingBook Digital Publishing Software