Step 3
Pressure Rings
Loosen the hex socket screws of the tool clamp pressure rings.
Swivel Tool Clamp Ring
Step 4
Screws
From the back of the right-angle power tool, insert the adapter and tool inside the tool clamp.
Tightening the hex socket screws of the tool clamp pressure rings to secure the power tool.
screws
Tighten the locking nut with spanner with 58mm diameter until the tool is secure.
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
3
Made with FlippingBook Annual report maker