Setup Selections
The Tolerance parameters control the Go and No-Go signal response (see Go / No Go Signal section). The user sets a lower and upper torque thresholds to get a visual and audible warning signals when these limits are reached or breached during operation. This function is primarily used for safety and quality control. Tolerance
Selecting Tolerance
1. Press the "Menu" Button. 2. Use the Scroll Down key and select Setup by highlighting and pressing Enter . 3. Use the Scroll Up or Down key to toggle through the Setup options. 4. Press Enter key to select a setup setting for Tolerance .
Tolerance Auto Clear Angle Setup T+A Threshold First Peak Spindle Audit
Filter Units Mode Setup
1. Press the Right or Left key to toggle between High and Low Tolerance.. 2. Use the Scroll Up or Down key to change the tolerance settings . 3. Press Enter key once setting is complete. 4. Press Main button to return to main display screen.
Tolerance Setting
Low: _0.000 High: 84.950
lbf.in lbf.in
Main
Clear
This function controls the method of clearing the display of torque readings.
Auto Clear When Auto Clear is selected, the torque values, during operation, will automatically be cleared from the display. The user can set the time threshold to control how long the values should be displayed before clearing. Manual Clear When Manual Clear is selected, the torque values during operation will indefinitely be display until the user presses the Clear key.
Page 10
Corporate Headquarters: 1080 North 11th Street, San Jose, CA95112 Phone: (408) 292-2214 Fax: (408) 292-2733 www.mountztorque.com
Made with FlippingBook Annual report maker