Selecting Clear
1. Press the "Menu" Button. 2. Use the Scroll Down key and select Setup by highlighting and pressing Enter . 3. Use the Scroll Up or Down key to toggle through the Setup options. 4. Press Enter key to select a setup setting for Auto Clear .
Tolerance Auto Clear Angle Setup T+A Threshold First Peak Spindle Audit
Filter Units Mode Setup
1. Use the Scroll Up or Down key to toggle between Manual or Auto Clear. 2. Press the Scroll Left or Right key to move down to the Time selection 3. For Auto Clear, use the Scroll Up or Down key to toggle between the selection of time between 1- 5 seconds. 4. Press Enter key once setting is complete. 5. Press Main button to return to main display screen.
Auto Clear Setting
Mode: Auto Time (seconds): 2
Main
This menu item contains 2 selections. The first selection is the Angle Threshold for Audit Mode. The default is 2 degrees but it can be set from 1 to 5 degrees. The second selection is Angle Polarity. Angle Polarity is used when you find that the Angle is giving a negative sign when the Torque applied is Clockwise. This may be needed to compensate for some transducers that have the wrong polarity for Angle. Angle Setup
Selecting Angle Setup
1. Press the "Menu" Button. 2. Use the Scroll Down key and select Setup by highlighting and pressing Enter . 3. Use the Scroll Up or Down key to toggle through the Setup options. 4. Press Enter key to select a setup setting for Angle Setup .
Tolerance Auto Clear Angle Setup T+A Threshold First Peak Spindle Audit
Filter Units Mode Setup
Page 11
Corporate Headquarters: 1080 North 11th Street, San Jose, CA95112 Phone: (408) 292-2214 Fax: (408) 292-2733 www.mountztorque.com
Made with FlippingBook Annual report maker