Direction
Allows an operator to set the direction for capturing the torque readings: (Clockwise, Counter Clockwise and Both directions).
When performing a dead weight calibration, the direction should be set for both directions.
Selecting Direction
1. Press the "Menu" Button . 2. Use the Scroll Down key and select Setup by highlighting and pressing Enter . 3. Use the Scroll Up or Down key to toggle through the Setup options. 4. Press Enter key to select a setup setting for Direction .
Auto Clear Angle Setup T+A Threshold First Peak Spindle Audit Direction
Filter Units Mode Setup
Direction Setting
Direction: BOTH
1. Use the Scroll Up or Down key to toggle through the dIrection settings: (Both, CW, CCW) 2. Press Enter key once setting is complete. 3. Press Main button to return to main display screen.
Main
Page 15
Corporate Headquarters: 1080 North 11th Street, San Jose, CA95112 Phone: (408) 292-2214 Fax: (408) 292-2733 www.mountztorque.com
Made with FlippingBook Annual report maker