Heading
Page
Heading
Page
External Connections
3 3 4 5 5 8 9
Tool Test Operation Angle Test Operation
24 28 30 32 36 38 40 41 41 45
User Interface
Quick Menu Structure
Torque Sensor Calibration Data Logging (Graphing) Torque Meter Bootloader Accessory - Bar Code Reader
Screen Display Menu Selections Mode Selections
Environmental Conditions
Accessory - Multiplexer Force &Load Sensors
Set-Up Selections
10 17 17
Transducer Calibration Reminder
End User Software License Agreement
ARCII
Mountz Service Locations
Power On &Battery Operation 18 Installation of Mountz Torque Meter Interface Program 18
Features
System Accuracy +/- 0.5% of reading from 20% to 100% of full scale. System Accuracy +/- 1% of reading from 10% to 20% of full scale. Recommended for all hand screwdrivers, wrenches or power tools. Provides “EZ-Plug & Play” with Mountz Torque Sensors. Features “ARCII” technology, an instant auto-recognition system of the sensor connected to the LTT. Selection of six operating modes: (Track, Peak, First Peak, Audit, Spindle Audit and Torque + Angle). Seven units of torque measurements: (ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm). Two units of force measurements: (lbf and kN) Features built-in Tool Tests operation . Includes three PC Windows based software programs: Mountz Torque Meter Interface Program- for sensor calibrations, meter calibration and tool tests. Torque Meter Bootloader - for updating the LTToperating systems. "Excel Add-In" for Real-Time data collection into an Excel spreadsheet. It also provides statistics calculations. “Flash" memory allows upgrades to be done by the user in the field & internet through the USB port. Five low-pass filter selections (3000, 2000, 1500, 500 and 200 Hz). Easy to use Menu Structure. Six-digit display.
Real Time Clock for time stamping of readings. USB interface to download readings to PC.
High Capacity Li-Ion Batteries for long life (30 hrs with standard transducers and 16 hrs with brushless rotary). Can connect to most mv/v transducers and can store calibration data for up to 50 non smart torque & force sensors. The 5VDC capability allows unit to be used with a Brushless Rotary Transducer for testing pulse tools and high RPM tools. Torque and Angle data is displayed simultaneously when used with Torque and Angle sensors, up to 8000 RPM for angle measurement. Stores a total of 5000 data points.
Real time graph of torque vs. time using associated PC Windows software. Features Go / No Go LEDs that illuminate when high or low setting is achieved. Display Accuracy is better than +/- 0.0625 of reading.
Page 2
Corporate Headquarters: 1080 North 11th Street, San Jose, CA95112 Phone: (408) 292-2214 Fax: (408) 292-2733 www.mountztorque.com
Made with FlippingBook Annual report maker