Screen Display
When the Torque Analyzer is turned on and it is connected to a Mountz "Smart" Torque Sensor with ARCII technology it will display a Screen similar to that below for 5 seconds and then go into Reading Mode. This will also happen if a "Smart" torque sensor is disconnected and another smart torque sensor is connected. It will automatically detect if the sensor is a torque or force sensor.
Mountz LTT-2100 Version 1.06k
Tool Model BMX250i Serial Number 04-93-071
Note: When disconnecting a smart torque sensor and connecting another, the operator must unplug the cable from the LTTunit.
If an un-calibrated torque sensor or force sensor is connected then the Analyzer will display a screen as below.
Mountz LTT-2100 Version 1.06k
Uncalibrated Transducer - Connect to Calibration Software
Note: The LTTsupports Non-Smart torque sensors & force sensors as well as Non-Mountz torque sensors. Non- smart torque sensors can be detected and can be calibrated in the "internal" memory. The LTT will offer 2 choices. It offers to calibrate or choose from a list of torque sensors stored in the internal memory.
Page 5
Corporate Headquarters: 1080 North 11th Street, San Jose, CA95112 Phone: (408) 292-2214 Fax: (408) 292-2733 www.mountztorque.com
Made with FlippingBook Annual report maker