Menu Selections
Selecting Units
1. Select Units by highlighting and pressing Enter . 2. Use the Scroll Up or Down key to toggle through the Unit options. 3. Press Enter key to select a Filter Setting.
For Torque Sensors
For Force Sensors
Note: When a torque sensor is connected, the LTT lists only torque units. Also, cN.m is also available but you must scroll down. When a force sensor is connected, the LTTlists only force units.
lbf kN
lbf.in lbf.ft ozf.in kgf.cm kgf.m N.m
Filter Units Mode Setup
Main
Cancel
Selecting Mode Options
1. Select Mode by highlighting and pressing Enter . 2. Use the Scroll Up or Down key to toggle through the Mode options. 3. Press Enter key to select a Mode Setting. 4. The Main (or reading screen) will display the value of the selected Mode.
For Torque Sensors
For Force Sensors
Track Peak
Track Peak First Peak Audit Torque +Angle Spindle Audit
Note: When a torque sensor is connected, the LTTlists only modes it can operate with. When a force sensor is connected, the LTTlists only modes it can operate with.
Filter Units Mode Setup
Main
Cancel
Selecting Setup
1. Select Setup by highlighting and pressing Enter . 2. Use the Scroll Up or Down key to toggle through the Setup options. 3. Press Enter key to select a Setup Setting.
Tolerance Auto Clear Angle Setup T+A Threshold First Peak Spindle Audit
Filter Units Mode Setup
Note: Direction, Clock,Contrast, Language, & Sleep is also available but you must scroll down.
Main
Page 7
Corporate Headquarters: 1080 North 11th Street, San Jose, CA95112 Phone: (408) 292-2214 Fax: (408) 292-2733 www.mountztorque.com
Made with FlippingBook Annual report maker