Mode Selections
Torque + Angle
This allows an operator to set up an initial torque and follow up with a rotation to a specified angle and display the final torque. The LTT can collect Torque and Angle data if the unit is connected to a transducer that includes the angle function. It is a "Real Time" angle function that can capture Torque and Angle up to 8000 RPM. See page 12 for setting up Torque + Angle.
T+A 3000 Hz 9.9985 lbf.in 10 deg
Menu
Tool Tests
Not applicable for Force & Load Sensors.
This feature is designed for auditing the operation of a Spindle Tool. An angle enabled transducer is required to operate in this Mode. The unit checks the Torque and Angle setting of a Spindle. When the spindle stops, the LTTwill display and record the final angle, and final peak torque. See page 14 for setting up Spindle Audit. Spindle Audit
Spindle Audit
1500 Hz +18.969 lbf.in
Menu
Tool Tests +2.8723
Environmental Conditions
Operating Temperature: 0 Degrees Centigrade to 50 Degrees Centigrade
Storage Temperature: -20 Degrees Centigrade to 70 Degrees Centigrade
Humidity: Maximum of 95% Relative Humidity
Page 9
Corporate Headquarters: 1080 North 11th Street, San Jose, CA95112 Phone: (408) 292-2214 Fax: (408) 292-2733 www.mountztorque.com
Made with FlippingBook Annual report maker