Air heaters Air Top Evo 40
1
Scopes of delivery
Air Top Evo 40 – efficient & silent High-output, compact, quiet and up to 2,200 m altitude capability, the heater is ideally suited for the most rigorous requirements. For higher altitude requirements a heater up to 5,500 m altitude capability is available. It can be upgraded with the MultiControl panel to offer additi - onal operation modes depending on individual heating requirements.
Order number Air Top Evo 40 D 12 V RV Standard Air Top Evo 40 D 12 V RV Comfort
The advantages of the Air Top Evo 40:
9029235C
9029236D Air Top Evo 40 D 12 V HA RV Comfort 9038982B HA = suitable for very high altitudes of up to 5,500 m Non HA = suitable for altitudes of up to 2,200 m Mounting parts For best mounting of each heater, please refer to our dedicated mounting accessories. Fuel extractor The connection of the heater to the fuel system depends on the vehicle. Please select the right solution for your vehicle. Air distribution For the distribution of the hot air in a motorhome, you need hoses, distributors and outlets. Please compose the air system individually. Accessories (optional) For extension of your heating system you will find comfort control elements as well as other installati- on and system components in the separate heating catalog and a selection of components also in this catalog.
What is the Intelligent Blower Control? Thanks to the control of several parameters, the heating regulation can optimize the heating output and the blower speed, resulting in: Low electrical consumption and low noise in regular operation (lower motor speed but same heat output) High heat output availability for applications with higher back pressure Up to 4.0 kW heat output Very low electrical power consumption thanks to Intelligent Blower Control Very silent operation thanks to low blower speed and silent fuel pump DP42.4 Automatic altitude adjustment up to 2,200 m as a standard Additional available automatic high altitude adjustment up to 5,500 m Automatic cold start function for quick warm-up
2
Air Top Evo 40 Heater with (pressure) altitude sensor RV wiring harness with integrated DP42.4 wiring harness External temperature sensor 2.5 m Fuel hose 5 m Air Intake silencer Air Top Evo
3
Depicted here is an underfloor heater operating in recirculated air mode with four outlets. The entrance area is heated indirectly by the intake line.
4
Fuel pump DP 42.4 Big exhaust silencer
Mounting parts Documentation
In top-bank vehicles the upper sleeping area should be heated with a separate outlet. The same is recommended for the garage.
Standard scope of delivery Rotary selector switch Flexible air intake tube 30 cm Extension wiring harness fuel pump 3 m Flexible exhaust tube 80 cm
5
In vehicles consisting of several separate areas a sufficient number of outlets must be installed for a uniform distribution of heat. The air intake is at a central location in the vehicle.
Comfort scope of delivery MultiControl RV/MAR ATE Flexible air intake tube 50 cm Extension wiring harness fuel pump 5 m Flexible exhaust tube 1.1 m
Technical specifications
Air Top Evo 40
1.5 – 3.5 / 4.0*
Heating power, control range/boost (kW)
Diesel DIN EN 590, B100 Fame DIN EN 14214**, Paraffinic fuel (HVO / GTL) DIN EN 15940
Fuels
0.18 – 0.43 / 0.49*
Fuel consumption, control range/boost (l/h)
12
Rated voltage (V)
15 – 40 / 55*
Rated power consumption (W) Air flow against 0.5 mbar (m 3 / h) Dimensions L x W x H (mm)
Please refer to our separate heating product catalog for our full range of accessories (see also page 9).
132 / 140*
423 x 148 x 162
5.9
Weight (kg)
* Increased heat output (”Boost“) possible for max. 6 hours. ** Recommendation: max. one season only due to aging of the fuel.
24
25
Made with FlippingBook Digital Proposal Creator