Fluke 771, 772 and 773 mA Process Clamp Meters
Recommended Accessories
Don’t break the loop on 4-20 mA signal measurements and save time with the Fluke 771, 772 and 773 Milliamp Process Clamp Meters. Three year warranty, (one year provided on mA clamp assembly and cable). Use the Fluke 772 and 773 to: • Source 4-20 mA signals for testing control system I/O or I/Ps • Simulate 4-20 mA signals for testing control system I/O • Measure 4-20 mA signals with in-circuit measurement • Power a transmitter with the 24 V loop power supply • Automatically ramp and step change the 4-20 mA output for remote testing Use the Fluke 773 to: • Measure DC voltage to verify 24 V power sup- plies or voltage I/O signals • Source DC voltage to test voltage input devices • Scaled mA output signal enables a logging DMM (289) to record 4-20 mA signal without breaking the loop • mA in/out: simultaneously source a mA signal while measuring a mA signal with the clamp
TL220
C550 Tool Bag
SureGrip™ Industrial
Test Lead Set See page 144
See page 153
Fluke 771, 772 and 773 mA Process Clamp Meters pay for themselves • The more you use them the more money you save • Measuring 4-20 mA signals (five) times without operator intervention can pay for the 771 • Saving a trip back to shop to get a loop calibrator can pay for the price difference of the 772 • Saving a trip back to the shop for a voltage test source can pay for the price difference of the 773
Fluke 773
Fluke 772
Fluke 771
Scaled mA
mA measure w/jaw
mA measure In circuit
Loop power 24 V
DCV source 0-10 V
DCV measure 0-30 V
mA source
mA sim
mA in/ out
output to mA input
● ● ●
771 772 773
— — — —
— —
— —
— —
— —
● ●
● ●
● ●
● ●
●
●
●
●
Resolution and range
Specifications Function
Accuracy
Notes
0 to 20.99 mA
0.2 % + 5 counts Measured by clamp
771, 772, 773
mA measurement
21.0 mA to 100.0 mA 1 % + 5 counts
—
Measured in series with test jacks Maximum mA drive: 24 mA into 1,000 ohms
772 and 773
mA measurement
0 to 24.00 mA
0.2 % + 2 counts
772 and 773
mA source
0 to 24.00 mA
0.2 % + 2 counts
772 and 773
mA simulate
0 to 24.00 mA
0.2 % + 2 counts Maximum voltage 50 V DC 0.2 % + 2 counts 2 mA maximum drive current
773
Voltage source
0 to 10.00 V DC
Included Accessories Fluke 771: Soft Carrying Case, User Manual. Fluke 772/773: Four AA Alkaline Batteries (installed), Soft Carrying Case, TL75 Test Leads, AC 72 Detachable Clip, TL940 Mini-hook Test Leads, Instruction Sheet, Hanging Tool with Hook and Loop Strap. Ordering Information
773
Voltage measure 0 to 30.00 V DC
0.2 % + 2 counts —
771
772
773
Battery
Two 1.5 V, Alkaline, IEC LR6
Four 1.5 V, Alkaline, IEC LR6
Working hours Size (HxWxL)
40 hours typical
12 hours @ 12 mA source into 500 ohms
59 mm x 38 mm x 212 mm
43.7 mm x 70 mm x 246.2 mm
Weight
260 g
410 g
Operating temperature
-10 °C to 50 ºC
IP rating
IP 40
FLUKE-771
Milliamp Process Clamp Meter Milliamp Process Clamp Meter Milliamp Process Clamp Meter
FLUKE-772
FLUKE-773
C ontact your local distributor for price and availability. www.fluke.com/au/wtb
www.fluke.com/au/PCT
Process Calibration Tools
105
Made with FlippingBook Learn more on our blog