Fluke 729 Automatic Pressure Calibrator
Portable automatic pressure calibrator simplifies pressure calibration The Fluke 729 Automatic Pressure Calibrator has been designed specifically with process technicians in mind to simplify the pressure calibration process and provide faster, more accurate test results. Technicians know that calibrating pressure can be a time consuming task, but the 729 makes it easier than ever with an internal electric pump that provides automatic pressure generation and regulation in an easy-to-use, rugged, portable package. The Fluke 729 can also automatically test multiple pressure test points and automatically document the results. Calibration is as easy as typing in the starting and ending pressure and the number of test points and tolerance level; the 729 does the rest. With three ranges to choose from 30 psi (2 bar, 200 kPa), 150 psi (10 bar, 1 MPa) and 300 psi (20 bar, 2 MPa), the Fluke 729 Automatic Pressure Calibrator is designed to perform when and where you need. • Automatic pressure generation and regulation to 300 psi • Easily document the process using on-board test templates • Automatic internal fine-pressure adjustment • Measure, source and simulate 4 to 20 mA signals • 24V loop power for powering transmitters for tests • HART communication for testing HART smart transmitters • Built-in leak testing for verifying test setups for leakage • Fluke Connect ® App compatibility • Measure temperature with optional 720RTD probe • Measure VDC for testing 1 V DC to 5 V DC output transmitters • Compatible with Fluke 700G Series and 750 Series Pressure Modules • Upload documented test results to DPCTrack2™ Calibration Management Software to manage your instrumentation, create scheduled tests and reports and manage calibration data • Three year warranty
Recommended Accessories
750 SW DPC/TRACK2 Software See page 165
FLUKE 750P Series Pressure Modules See page 124
720URTDA Universal RTD Adapter for 721 and 719Pro See page 163
Fluke 729
Included Accessories Soft Case, Stackable Test Leads, AC280 Hook Clips, Alligator Clips, Test Probes, Magnetic Hanger Kit, Carrying Strap, Power Supply, Rechargeable Battery (installed), Hose Kit with Push Fit Adapters, Hanging Clip, USB Cable, 1/8 in FNPT to 1/4 in FNPT Adapter, 1/8 in FNPT to F-M20 Adapter, 1/8 in FNPT to 1/4 in FBSP Adapter, PTFE Tape, (2) Sintered Filters, Liquid Dirt Trap, Water Trap Drain and Valve Tuning Hoses, Wireless Adapter (FC Models only), Quick Start Guide, Safety Sheet.
Pressure Enabled
Ordering Information
300 psi, 20 Bar Automatic Pressure Calibrator 150 psi, 10 Bar Automatic Pressure Calibrator 30 psi, 2 Bar Automatic Pressure Calibrator 30 psi, 2 Bar Automatic Pressure Calibrator with Fluke Connect 150 psi, 10 Bar Automatic Pressure Calibrator with Fluke Connect 300 psi, 20 Bar Automatic Pressure Calibrator with Fluke Connect 300 psi, 20 Bar Automatic Pressure Calibrator and DPCTRACK2 Software Bundle
FLK-729 30G
Pressure specification* One-year specification Control specification `
FLK-729 150G
0.02 % of full scale
0.005 % full scale minimum
*See manual for detailed specifications
FLK-729 300G
Model
Psi range, resolution -12.0000 to 30.0000 psi -12.000 to 150.000 psi -12.000 to 300.000 psi -12.0000 to 30.0000 psi
Bar range, resolution -0.82737 to 2.06842 bar -0.8273 to 10.3421 bar -0.8273 to 20.6843 bar -0.82737 to 2.06842 bar
kPa range, resolution -82.737 to 206.843 kPa -82.73 to 1034.21 kPa -82.73 to 2068.43 kPa -82.737 to 206.843 kPa
Comment
729 30G
No wireless communication No wireless communication No wireless communication Wireless communication for Fluke Connect Wireless communication for Fluke Connect Wireless communication for Fluke Connect
FLK-729 30G FC
729 150G
729 300G
FLK-729 150G FC
729 30G FC
729 150G FC
-12.000 to 150.000 psi
-0.8273 to 10.3421 bar
-82.73 to 1034.21 kPa
FLK-729 300G FC
729 300G FC
-12.000 to 300.000 psi
-0.8273 to 20.6843 bar
-82.73 to 2068.43 kPa
FLUKE-729 /750SW BU
www.fluke.com/au/PCT
Process Calibration Tools
121
Made with FlippingBook Learn more on our blog