Fluke Calibration P3000 Deadweight Testers
The P3000 Series is the culmination of over 50 years of experience in the production and design of high performance pressure standards. With features designed to improve accuracy and performance, increase reliability and simplify operation these deadweight testers can be used to calibrate virtually any pressure sensing device, including transducers, transmitters, gauges or pressure switches. All units provided with accredited calibration. One year warranty. P3000 Pneumatic Deadweight Tester High performance gas deadweight testers with unique suspended piston design for vacuum calibration. • 0.015% of reading accuracy standard (0.008% optional) • 3 to 500 psi (0.2 to 35 bar) pressure • Optional low range 0.03 to 1 bar vacuum (1 to 30 inHg) • Integrated vacuum and pressure pump available to 2 MPa (300 psi)
Recommended Accessories
5540 Metric & 5541 BSP Adapter Sets
P5543 Angle Adapter
Ordering Information * -P indicates built-in pump optional. Included Accessories ISO 17025 Accredited Calibration Certificate, Operating Fluid (where applicable), Spare Seals, Adaptors for 1/8, ¼, 3/8, ½ NPT and BSP, and Metric Adaptors (M20 and M14).
Fluke P3000
Vacuum Deadweight Tester (-100 KPA) Vacuum Deadweight Tester (-30 INHG) Vacuum Deadweight Tester (-1000 MBAR) Vacuum Deadweight Tester (-760 MMHG)
P3011-KPA-P*
P3011-INHG-P*
P3100 Hydraulic Deadweight Tester Highly accurate oil deadweight tester with quick and easy-to use single and dual piston deadweight models • Pressure ranges to 140MPa (20 k psi, 1400 bar) • 0.015% of reading accuracy standard (0.008% optional) • Built in pressure generation and adjustment • Single or dual piston formats P3200 Hydraulic Deadweight Tester Hydraulic deadweight tester specially designed to use water as a test medium. • Pressure ranges to 70MPa (10 k psi, 700 bar)
P3011-MBAR-P*
P3011-MMHG-P*
P3012-KPA-P
Gas Deadweight Tester, 100 KPA, with Pump
Gas Deadweight Tester, 1000 MBAR, with Pump Gas Deadweight Tester, 400 INH20, with Pump
P3012-MBAR-P
• 0.015% of reading accuracy standard (0.008% optional) • Built in pressure generation and adjustment is standard • Single or dual piston formats • Water media
P3012-INH20-P
Gas Deadweight Tester, 200 KPA, with Pump
P3013-KPA-P
Accuracy* ±0.015% of reading (±0.008% optional)
*Accuracy based on % of reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10% ± (accuracy class) x 10% of the piston range. Mass and PCU Materials of Construction Standard weight material Series 3 non-magnetic austenitic stainless steel Weight density 7.8 g/cm³ Optional fractional weights Solution heat treated aluminum Weight density 2.7 g/cm³ Models P3011, P3012, P3013, P3022, P3023, P3025 (V) Piston Material: Ceramic Cylinder Material: Martensitic steel Coefficient of Expansion: 11 ppm/°C Models P3014, P3015, P3025 (P) P3031, P3032 (P & V) Piston Material: Tungsten carbide Cylinder Material: Martensitic steel Coefficient of Expansion: 16.5 ppm/°C
P3013-MBAR-P
Gas Deadweight Tester, 2000 MBAR, with Pump Gas Deadweight Tester, 800 INH20, with Pump Tester, 10 KGF/CM2, with Pump Gas Deadweight Tester, 150 PSI, with Pump Gas Deadweight Tester, 1000 KPA, with Pump
P3013-INH20-P
P3014-KGCM2-P Gas Deadweight
P3014-PSI-P
P3014-KPA-P
PressCal Software
Gas Deadweight Tester, 1 MPA, with Pump
P3014-MPA-P
PressCal software provides a quick and effective solution to enhance the pressure measurement uncertainty of Deadweight Testers. PressCal features an easy-to-use user Interface that allows you to enter all the necessary corrections and parameters to accurately determine the pressure generated by the DWT.
P3015-BAR-P* Gas Deadweight Tester, 35 BAR P3015-KGCM2-P* Gas Deadweight Tester, 35 KGF/CM2 P3015-PSI-P*
PressCal also provides: • Automatic certificate generation • Customer details management
Gas Deadweight Tester, 500 PSI Gas Deadweight Tester, 3500 KPA Gas Deadweight Tester, 3.5 MPA
• Real-time auditing • Choice of 12 pressure units
P3015-KPA-P*
P3015-MPA-P
126
Process Calibration Tools
Made with FlippingBook Learn more on our blog