AC/DC CLAMPS
i410 AC/DC Current Clamp This battery-powered Hall-effect probe measures 1 A to 400 A with large-claw clamp that gives access to difficult-to-reach areas. It is compatible with most multimeters and other devices that measure AC and DC current and accepts shrouded 4 mm banana plugs. • On/Off LED indicator • AC and DC current range: 1 A to 400 A • Frequency range: 3 kHz • Safety rating: CAT III 600 V
i1010-Kit AC/DC Current Clamp and Carry Case Kit This special-value kit for electrical professional adds AC and DC current measurement capabilities to a digital multimeter. A roomy carrying case holds a meter and the current clamp plus test leads,
80i-110s AC/DC Current Clamp This clamp is compatible with ScopeMeters, power harmonics analysers, multimeters, or other voltage measurement devices that has BNC input connectors. • AC current range: 0.1 A to 70 A • DC current range: 0.1 A to 100 A • Frequency range: 1 Hz to 100 kHz • Optional PM9081/001 Dual Banana Plug Male to Female BNC Adapter is available for digital multimeters • Safety rating: CAT II 600 V
probes and manuals. Kit includes: • i1010 AC/DC Current Clamp • C116 Soft Carrying Case
i30 AC/DC Current Clamp Based on Hall-effect technology, this battery-powered clamp measures both AC and DC current. It may be used in conjunction with multimeters, recorders and other suitable recording instruments for accurate non-intrusive current measurement. • AC current range: 30 mA to 20 A RMS • DC current range: 30 mA to 30 A • Frequency range: DC to 20 kHz (-0.5 dB) • Safety rating: CAT III 300 V
Did you know? Does your current probe read zero current when you clamp it around a power cord? That’s because the power cord has both the hot and neutral current carrying wire in it. If both wires are in the jaws of the clamp meter, the fields cancel each other out, and the current clamp will read nothing. You need to put just one current- carrying conductor in the jaw of the current clamp. If you don’t have access to the separate wires within the cord, use a line splitter tool to avoid breaking the circuit.
i410-KIT AC/DC Current Clamp and Carry Case Kit This special-value kit for electrical professionals adds AC and DC current measurement capabilities to a digital multimeter. A roomy carrying case holds a meter and the current clamp plus test leads, probes and manuals. Kit includes:
• i410 AC/DC Current Clamp • C116 Soft Carrying Case
i30s AC/DC Current Clamp Based on Hall effect technology, this battery- powered clamp measures both AC and DC current. It may be used with ScopeMeter and other suitable recording instruments for accurate non-intrusive current measurement. • AC current range: 30 mA to 20 A RMS • DC current range: 30 mA to 30 A • Frequency range: DC to 100 kHz • Safety rating: CAT III 300 V
i1010 AC/DC Current Clamp This clamp measures both AC and DC currents with a large-jaw, battery-powered Hall-effect probe that gives access to difficult-to-reach areas. It is compatible with most Fluke multimeters and any other devices that measure AC and DC current and accept shrouded 4 mm banana plugs. • On/Off LED indicator • AC current range: 1 A to 600 A AC • DC current range: 0.5 A to 1000 A DC • Frequency range: DC to 10 kHz • Safety rating: CAT III 600 V RMS
i310s AC/DC Current Clamp Based on Hall-effect technology, this battery-powered clamp measures both AC and DC current. This clamp is especially useful for current measurements on inverters, switching power supplies, industrial controllers, automotive diagnostics, and other applications requiring current measurements and/or waveform analysis.
• AC current range: 0.1 A to 300 A • DC current range: 0.1 A to 300 A • Frequency range: DC to 20 kHz • Safety rating: CAT III 300 V
150
Fluke Accessories
Made with FlippingBook Learn more on our blog