PORTABLE OSCILLOSCOPE ACCESSORIES
BB120-II Adapter BNC (Female) to Shielded Banana Jack • Set of 2 • Max signal voltage: 300 VRMS CAT III per IEC/EN61010 • Max voltage to ground: 600 V CAT III per IEC/EN61010
VPS420-X High Working Voltage Ruggedised Probe • Set includes: VPS420-X 100:1, 150 MHz
PM9091 Set of 3x Coaxial Cables with BNC Connectors • Length: 1.5m each • Impedance: 50 ohm • Colour: 2 x Red, 2 x Black, 2 x Grey • Max signal voltage: 300 V RMS • Max voltage to ground: 600 V RMS CAT III per IEC/EN61010-031
• X = Red, Blue, Grey or Green • Hook Clip for Probe Tip (Black) • Large Jaw Probe Clip (Black)
• Reference Lead with 4 mm Banana Plug • Large Jaw Alligator Clip for 4 mm Banana plug (Black)
PM9092 Set of Coaxial Cables with BNC Connectors • Length: 0.5 m each • Impedance: 50 ohm • Colour: 1 x Red, 1 x Black, 1 x Grey • Max signal voltage: 300 V RMS • Max voltage to ground: 600 V RMS CAT III per IEC/EN61010-031
TRM50 Coaxial Feed-through BNC (Male) to BNC (Female) Cable Terminator • Set of 2 • Impedance: 50 ohm • Max voltage over ground: CAT III 1000 V • Max power 1W
AS400 Probe Accessory Extension Set For VPS400 Series Probes • CAT III 1000 V/CAT IV 600 V • Reference Lead w/ 4 mm Plug (Blk) 60cm • Reference Lead with Hook Clip (Blk) 22cm • Large Jaw Probe Clip (Black) • CAT II 1000 V • 2 mm Test Probe for Probe Tip (1x, Black) • 4 mm Test Probe for Probe Tip (1x, Black)
PM9093 Adapter BNC (Male) to Dual BNC (Female) in T model (6) • Colour: 2 x Black • Max signal voltage: 300 V RMS CAT III per IEC/EN61010 • Max voltage to ground: 600 V RMS CAT III per IEC/EN61010
BHT190 Bus Health Test Break-out Adapter Set • Board with M12 connectors (male to female, 5 pins) • DB-9 Connectors (male to female, 9 pins + shield) • RJ-45 Connector, with short patch cable providing male to female interconnection (8 pins)
RS400 Probe Replacement Set For VPS400 Series Probes and VPS210 Series Probes • CAT III 1000 V/CAT IV 600 V • 1 x Probe Hook Clip (black) • Ground Lead w/ Mini Alligator Clip • 2 x Insulation Sleeve (Black) • CAT II 30V • 2 x Ground Spring (Black)
PM9081 Adapter BNC (Female) to Dual Banana Jack • Colour: 2 x Red, 2 x Black • Max signal voltage: 600 VRMS CAT III, per IEC/EN61010 • Max voltage to ground: CAT III 600 VRMS / CAT II 1000 V per IEC/EN61010
CS20MA Current Shunt for AC and DC measurements on 4 to 20mA Control Loops • Sensitivity: 10mV/mA • Shunt resistance: 10 ohm • Bandwidth: > 10 kHz • Max voltage to ground: CAT III 30 VRMS per EN/IEC 61010
RS500 Probe Replacement Set For VPS510 Series Probes • CAT II 300 V • 1x Hook Clip (Black) • 1x Ground Lead with Mini Alligator Clip • 2 x Insulation Sleeves for Probe’s Ground Contact (Black) • 1 x BNC to Probe Tip Adapter (Black) • CAT II 30 V • 2 x Ground Browsers (Black) • 1 x Insulated Mini Screwdriver, for Probe Adjustment purposes
PM9082 Adapter BNC (Male) to Dual Banana Jack • Colour: 2 x Red, 2 x Black • Max signal voltage: CAT III 600 VRMS per IEC/EN61010 • Max voltage to ground: CAT III 600 VRMS /CAT II 1000 V per IEC/EN61010
EBC290 External Charger For Fluke 120B and 190 Series II ScopeMeter ® Oscilloscope • Charging time (BP291): Five hours, giving an operating time of up to seven hours • DC input voltage: 15 V to 23 V, 714 mA nom. (DC input from BC190: 17.8 V / 0.84 A max)
HC120 Hook Clips • Colour: 1 x Red, 1 x GREY • Max voltage: 600 VRMS, CAT III per IEC 1010-2-031 • Nickel plated steel
TP920 Test Probe Adapter Set Suited for STL120 Test Leads (STL120-III, not compatible), TL71, TL75 & TL76 Test Leads • Rated for 3 A max
162
Fluke Accessories
Made with FlippingBook Learn more on our blog