Fluke 1000FLT Fluorescent Light Tester
The most complete lamp tester helps save you time, reduce costs The Fluke 1000FLT allows you to perform 5 tests with one compact tool. If your job requires keeping large numbers of fluorescent lights shining, the Fluke 1000FLT is an indispensable tool. This tester is a real time and money saver. • Saves time and reduces costs: Perform all 5 essential lighting tests in under 30 seconds to pinpoint problems and verify operation when done • Survives on-the-job handling: Drop-tested to survive from a two metre ladder • Easy to use: Bright indicator light plus audible alert • Built to last, easy to maintain: The Fluke 1000FLT’s extendable test rod is all metal and very rugged. But should the need arise, this test rod is easily replaced • Three year warranty Save time, reduce costs. The Fluke 1000FLT offers 5 essential lighting tests: 1 Lamp test: test bulb without removing from fixture. 2 Ballast test: easily determine if ballast is working. 3 Non-contact voltage: quickly check for voltage presence. 4 Pin continuity test: tests if filaments have continuity. 5 Ballast-type test: determine if ballast is electronic or magnetic without taking fixture apart– identify energy wasting ballasts.
Fluke 1000FLT Applications
Lamp test: Test bulb without removing from fixture
Fluke 1000FLT
True RMS
Test Specifications Lamp Test Max Output
3000 V peak-peak
Ballast Test
20 kHz
Ballast Type Discriminator
≤3 m distance
Pin Continuity Test NCV (VoltAlert TM )
< 1 kΩ
85 to 277 V AC, 45 to 67 Hz, ≤10 cm distance Operating -10 °C to +50 °C, Storage -40 °C to +60 °C
Temperature
Relative Humidity
85 % maximum
Safety rating
IEC 61010-1, pollution degree 2
Mechanical & General Specifications Size
Non-contact voltage: Quickly check for voltage presence
21.5 cm x 3.0 cm x 6.5 cm
Weight
0.37 kg
Battery type Battery life
4 x AA alkaline IEC LR6
40 hours
Auto Power Off
20 minutes after non-use
Low Battery Indicator
Power button light blinks when power is low (typically 85 % of capacity depleted)
Operating altitude
< 2000 m
Electromagnetic Environment
EN 61326-1: Portable
Resistance to impact
2 metre drop
Pin continuity test: Test if filaments have continuity
Included Accessories Ordering Information Four AA Alkaline Batteries, H1000 Holster, Quick Reference Guide. FLUKE-1000FLT
Fluorescent Light Tester
C ontact your local distributor for price and availability. www.fluke.com/au/wtb
www.fluke.com/au/electricaltesters
Electrical Testers
39
Made with FlippingBook Learn more on our blog