PRODUCT NAME SDS HÖGGBORVÉL H26-MLS
Light and powerful hammer drill, equipped with exchangeable drill chuck and chisel function Fast drilling progress and high removal performance when chiselling High impact energy For universal use Drilling, rotary hammer drilling and chiselling with adjustable chisel position (3-mode function) Comfortable Lockable switch increases comfort for longer drilling/chiselling work. Balanced power ratio in clockwise and anti-clockwise rotation Rotating brush plate Flexible applications The quick-release chuck means that the tool can be converted from SDS drive arbour to a standard drill chuck in just a few steps. Reduces risk of cable breakage Ball grommet 2 Years WÜRTH MASTERPLUS Warranty for wear damage The current WÜRTH MASTERPLUS warranty conditions must be observed. 3 Years Warranty on manufacturing and material defects Excluded are damages caused by improper use, overloading or failure to observe the operating instructions.
Nominal voltage
230 V/AC
Frequency
50 Hz
Protection class
Protection class II/protective insulation
Power input
830 W
Min./max. idle speed Min./max. impact rate Tool holding device
0 - 1300 rpm 0 - 4000 rpm
Suitable for SDS-plus
Impact energy
2.7 J
Functions
Chisel function, Exchangeable chuck, Adjustable chisel position, Clockwise/anti- clockwise rotation, Impact stop for normal drilling, Throttle switch, Lock button for continuous operation
Min./max. drilling diameter in concrete Min./max. recommended drilling range for optimum performance (in concrete) Min./max. drilling diameter in steel Max. drilling diameter of hollow drill bit in masonry
4 - 26 mm
6 - 16 mm
4 - 13 mm
68 mm
Weight of machine
2.9 kg
Cable length
4 m
Article no.
5708 205 1
641
Made with FlippingBook - Online magazine maker