PRODUCT NAME RAFMAGNS STÁLFRÆS GS 700-E
Small and powerful For use in hard-to-reach areas Lightweight collar design Safety cut-out If the tool blocks, the power supply is interrupted immediately Restart protection To prevent an accidental restart of the tool Thermal overload protection Cut-out carbon brushes for protecting the motor Long service life Insensitive to dust with coated field coil and winding protective grille 2 Years WÜRTH MASTERPLUS Warranty for wear damage The current WÜRTH MASTERPLUS warranty conditions must be observed. 3 Years Warranty on manufacturing and material defects Excluded are damages caused by improper use, overloading or failure to observe the operating instructions.
Nominal voltage
230 V/AC
Power input Power output
710 W 430 W
Min./max. idle speed Collet chuck diameter Clamping neck diameter
13000 - 34000 rpm
6 mm
43 mm 1.7 kg
Weight of machine
Cable length
4 m
Article no.
0702 520 0
Related products for 0702 520 0
Art. No.
Collet chuck for straight grinder
0702 520 002 0708 520 021 0708 522 021 0702 520 001 0702 520 002 0702 520 003
Wrench Handle
Collet chuck for straight grinder 3 mm Collet chuck for straight grinder 6 mm Collet chuck for straight grinder 8 mm
645
Made with FlippingBook - Online magazine maker