Marine Sunroof Catalog Webasto Product Range & Reference List
Marine Coolant Pumps Run Dry Protection to Keep You Cool
KoolAir PM500
Pump Features:
Fully Submersible
Pumps 500 gallons/hr Run Dry and Thermal Overload Protection
Run Dry Protection to Keep You Cool The PM500 is a magnetically driven pump with no shaft seal. The pump is epoxy encapsulated, which allows the PM pump to run fully submerged in many liquids or in open air for complete moisture protection. When re-assembling the pump for service, make sure all “O“ rings are properly seated. See the repair parts list for a breakdown of replacement parts. In a Run Dry scenario, the pump will shut down (Simply let it cool down or hose it down to assist) 115V & 230V One Phase, all cords are six feet in length and are U.L. LISTED 18/3 wire The pump is not self-priming and requires a flooded suction
Technical Specifications
PM500
115
5011370
Webasto Part #
230
5011371
50Hz
lpm
31
Maximum Flow
60Hz
gpm
8.5
Webasto is the North American exclusive distributor of KoolAir Pumps to the marine industry.
50Hz
m
4.3
Maximum Flow
60Hz
ft (psi)
19 (8.2)
Inlet
3.4“ FPT
Outlet
1/2“ MPT
psi
25
Maximum Internal Pressure
bar
1.7
°F
130
Maximum Liquid Temp.
°C
54
Packed Wieght
kg / lbs
3.85 / 8.5
TE / SUB 115V 60Hz 230V 50/60Hz
Motor Type
Phase
1
Volts
115 / 230
Watts
100
50Hz
Amps
1.0
Kw
0.037
Rpm
2850
*All specifications and flow curves are based on pumping water
Volts
115 / 230
Watts
120 / 120
60Hz
Amps
2.0 / 1.0
Hp
1/20
Warranty: KoolAir Pumps are guaranteed only against defects in workmanship or materials for a period of two years from date of manufacture while pumping water.
Rpm
3450
Electrical Connection
Cord
7.50 x 4.80 x 4.87in 19 x 12.2 x 12.3cm
Overall Pump Dim. (LxWxH)
KoolAir PM1000
Pump Features:
Run Dry Protection to Keep You Cool The PM1000 is a magnetically driven pump with no shaft seal. and the motor is Open Drop Proof (ODP). The hardened Carbon bushing allows for extended run dry time without any damage to the pump head. See the parts diagram for assembly instructions. Impeller may be trimmed to modify flows or compensate for liquids of higher viscosity. For application assistance, please contact KoolAir Pumps at 800-810-1053. Pumps 1,000 gallons/hr Run Dry and Thermal Overload Protection 115V & 230V One Phase, all cords are 56“ in length and are U.L. LISTED 18/3 wire Motors are rated as; continuous duty The pump is not self-priming and requires a flooded suction
Technical Specifications
PM1000
115V
5011372
Webasto Part #
230V
5011373
50Hz
lpm
54.8
Maximum Flow
60Hz
gpm
17.2
50Hz
m
6
Maximum Flow
Webasto is the North American exclusive distributor of KoolAir Pumps to the marine industry.
60Hz
ft (psi)
27 (11.7)
Inlet
1“ FPT
Outlet
1/2“ MPT
psi
50
Maximum Internal Pressure
bar
3.4
4.50
9.25
1.30
°F
130
OUTLET 1/2” (14MPT)
Maximum Liquid Temp.
1.50
°C
54
Packed Wieght
kg / lbs
8.02 / 17.70
CARBON BUSHING
O.D.P. 115V 60Hz 230V 50/60Hz
6.18
Motor Type
2.45
Phase
1
56” CORD
4 SLOTS .53 TYP.
NYLON
Volts
115 / 230
3.39
Watts
147
3.14
5.40
4.37
50Hz
Amps
1.2
Kw
0.093
Rpm
2850
*All specifications and flow curves are based on pumping water
Volts
115 / 230
Watts
216 / 207
60Hz
Amps
1.6 / 0.9
Kw
1/8
Warranty: KoolAir Pumps are guaranteed only against defects in workmanship or materials for a period of two years from date of manufacture while pumping water.
Rpm
3450
Electrical Connection
56“ Cord
9.25 x 4.37 x 6.18in 23.5 x 11.10 x 15.70cm
Overall Pump Dim. (LxWxH)
KoolAir SPM1000
Pump Features:
Pumps 1,000 gallons/hr Run Dry and Thermal Overload Protection
In a Run Dry scenario, the pump will shut down (Simply let it cool down or hose it down to assist) 115V or 230V One Phase, all cords are 56“ in length and are U.L. LISTED 18/3 wire The pump is not self-priming and requires a flooded suction PARTS LIST 3 5 6 7
2
4
1
8
9
Run Dry Protection to Keep You Cool The SPM1000 is a magnetically driven pump with no shaft seal. The pump is epoxy encapsulated, which allows the SPM1000 pump to run fully submerged in many liquids or in open air for complete moisture protection. The hardened Carbon bushing allows for extended run dry time without any damage to the pump head. The impeller may be trimmed to modify flows or compensate for liquids of higher viscosity. ITEM PART NUMBER DESCRIPTION MATERIAL 1 KAT1000-21 Screw Stainless Steel 2 KAT1000-22 Front Cover Reinforced Nylon 3 KAT1000-23 O-Ring Rubber 4 KAT1000-24 Washer & Shaft Ceramic 5 KAT1000-25 Impeller Carbon Bush & Reinforced Nylon 6 KAT1000-26 Rear Housing Reinforced Nylon 7 KAT1000-27 Magnet & Reinforced Nylon
Technical Specifications
Voltage
115V / 230V
Webasto Part #
5012087 / 5012088
Phase
1
Watts
207
Magnet, Bracket, and Motor
Amps
0.9
8 9
KAT1000-28 KAT1000-29
Stand
Reinforced Nylon Stainless Steel
HP/kW
1/8
Stand Washer & Nut
Webasto is the North American exclusive distributor of KoolAir Pumps to the marine industry. KJHGKJHGKJHGJK LKJHLKJH
RPM
3450
GPM LPM
14.5 54.8
Maximum Flow
PUMP DRAWING
FT (PSI) M
27 (11.7) 6
Maximum Head
50 3.4 SPM1000
PSI BAR
Maximum Internal Pressure
°F °C
130 54
Maximum Liquid Temperature
Packed Weight
17.7lb (8.02 kg)
Inlet
1“ FPT
Outlet
1/2“ MPT
Height
7.49in
Width
5.74in
Length
77.74in
10 15 20 25 30
*All specifications and flow curves are based on pumping water
Warranty: KoolAir Pumps are guaranteed only against defects in workmanship or materials for a period of two years from date of manufacture while pumping water.
0 5
0 2 4 6 8 10121416 G.P.M. G.P.M.
MECHANICAL SPECIFICATIONS
KoolAir TPM1000
Pump Features:
Pumps 1,000 gallons/hr Run Dry and Thermal Overload Protection
In a Run Dry scenario, the pump will shut down. (Simply let it cool down or hose it down to assist) 115V or 230V One Phase, all cords are 56“ in length and are U.L. LISTED 18/3 wire The pump is not self-priming and requires a flooded suction ISO 8846 Marine Ignition Protected Run Dry Protection to Keep You Cool The TPM1000 is a magnetically driven pump with no shaft seal and the motor is Open Drop Proof (ODP). The hardened Carbon bushing allows for extended run dry time without any damage to the pump head. See the parts diagram for assembly instructions. Impeller may be trimmed to modify flows or compensate for liquids of higher viscosity. For application assistance, please contact KoolAir Pumps at 800-810-1053. PARTS LIST TPM1000 ITEM PART NUMBER DESCRIPTION MATERIAL cm mm cm mm 1 KAT1000-21 Screw Stainless Steel Reinforced PP 0.4 4 4.5 45 2 KAT1000-22 Front Cover 3 KAT1000-23 O-Ring Rubber Ceramic 7.7 77 0.18 1.8 4 KAT1000-24 Washer & Shaft 6.37 63.7 0.633 6.33 LENGTH WIDTH 10.2 8
Technical Specifications
TPM1000
Webasto Part #
5011374
50Hz
lpm
54.8
Maximum Flow
60Hz
gpm
17.2
50Hz
m
6
Maximum Flow
60Hz
ft (psi)
27 (11.7)
Interior-Carbon Bush, Exterior-Reinforced PP
5 KAT1000-25
Impeller
7.5
75
4.8
48
6 KAT1000-26 Rear Housing
Reinforced PP
10.23 102.3
6.15
61.5
Inlet
1“ FPT
7 KAT1000-27 Driver Magnet
Magnet, Reinforced PP
Webasto is the North American exclusive distributor of KoolAir Pumps to the marine industry. 8 KAT1000-28 Bracket Reinforced PP 9 KAT1000-29 Motor O.D = 102.8mm
Outlet
1/2“ MPT
psi
50
Maximum Internal Pressure
800-810-1053
bar
3.4
TPM1000
°F
130
Maximum Liquid Temp.
°C
54
4.50
11.75”
Packed Wieght
kg / lbs
8.02 / 17.70
OUTLET 1/2” (14MPT)
1.50
TEFC 115V / 230V 50/60Hz
1.30
Motor Type
CARBON BUSHING
Phase
1
Volts
115 / 230
2.45
Watts
147
NYLON
3.14
5.40
3.39 4.37
50Hz
Amps
1.2
800-810-1053
Kw
0.093
KOOLAIR PUMPS MANUFACTURER’S EDGE 5044 INDUSTRIAL RD, SUITE C FARMINGDALE, NJ 07727
Rpm
2850
Volts
115 / 230
*All specifications and flow curves are based on pumping water
Watts
216 / 207
60Hz
Amps
1.6 / 0.9
Kw
1/8
Warranty: KoolAir Pumps are guaranteed only against defects in workmanship or materials for a period of two years from date of manufacture while pumping water.
Rpm
3450
Electrical Connection
56“ Cord
9.25 x 4.37 x 6.18in 23.5 x 11.10 x 15.70cm
Overall Pump Dim. (LxWxH)
Parts Lists
KoolAir PM500
KoolAir PM1000
Item Description Material
Dimensions (LxW)
Item Description Material
Dimensions (LxW)
1
Screw
Stainless Steel
37 x 5mm
1
Screw
Stainless Steel
4 x 45mm
2
Front Cover
Reinforced PP
24.3mm
O.D. - 102.8mm I.D. - 30mm
2
Front Cover
Reinforced PA6
3
O-Ring
Silicon
68.4 x 2.6mm
3
O-Ring
Rubber
77 x 1.8mm
4
Wash & Shaft
Ceramic
4
Wash & Shaft
Ceramic
63.7 x 6.33mm
5
Impeller
Polysulfone FDA Plastic
59mm
Inside - Carbon Bush Outside - Reinforced PA6
6
Rear Housing
Stainless Steel
10.15 x 10.15mm
5
Impeller
Diameter - 40 x 61.5mm
7
O-Ring
Rubber
72 x 2.5mm
6
Rear Housing
Reinforced PA66
102.3 x 61.5mm
8
Screw
Stainless Steel
12 x 5mm
7
Driver Magnet
Magnet, Reinforced PA66
Driver Magnet & Epoxy Motor
9
Ferrite Ceramic
8
Bracket
Reinforced PA66
9
Motor
10
Freeze Plug
Reinforced PP
5.93mm
A
Base
Reinforced PP
123.12 x 65mm
B
Optional Base
Reinforced PP
81.28 x 107.95mm
11
Grommet
Rubber
6 x 10.5mm
KoolAir SPM1000
KoolAir TPM1000
Item Description Material 1 Screw
Item Description Material
Dimensions (LxW)
Stainless Steel
1
Screw
Stainless Steel
4 x 45mm
2
Front Cover
Reinforced Nylon
O.D. - 102.8mm I.D. - 30mm
2
Front Cover
Reinforced PA6
3
O-Ring
Rubber
3
O-Ring
Rubber
77 x 1.8mm
4
Washer & Shaft
Ceramic
4
Wash & Shaft
Ceramic
63.7 x 6.33mm
5
Impeller
Carbon Bush & Reinforced Nylon
Inside - Carbon Bush Outside - Reinforced PA6
6
Rear Housing
Reinforced Nylon
5
Impeller
Diameter - 40 x 61.5mm
Magnet, Bracket and Motor
7
Magnet & Reinforced Nylon
6
Rear Housing
Reinforced PA66
102.3 x 61.5mm
7
Driver Magnet
Magnet, Reinforced PA66
8
Stand
Reinforced Nylon
8
Bracket
Reinforced PA66
Stand Washer & Nut
9
Stainless Steel
9
Motor
Notes
Please Contact Us
Do you have questions about Webasto’s heating, cooling & e-mobility?
Toll Free: 800-860-7866 info@webasto.com
The name Webasto stands for innovative and environmentally friendly heating and cooling solutions for marine applications, commercial vehicles, buses, RVs, off-highway equipment, emergency vehicles, cars and light trucks. Our success is based on our wide range of products and high quality standard. Our products offer fuel savings, reduced emissions, reduced engine wear, and ultimately a quick return on investment for the end user. Our main focus is customer excellence, surpassing the expectations of our partners and customers. For this reason, Webasto products are sold and installed through our network of authorized dealers and distributors, staffed with professionally trained sales people and technical experts worldwide.
Webasto Thermo & Comfort North America, Inc. 15083 North Road Fenton, Michigan 48430 USA Toll Free: 800-860-7866 Phone: 810-593-6000 webasto-comfort.com
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8Made with FlippingBook Online newsletter