KoolAir PM500 Fully submersible
Features: Pumps 500 gallons/hr Run Dry and Thermal Overload Protection In a Run Dry scenario, the pump will shut down (Simply let it cool down or hose it down to assist) 115 V & 230 V One phase, all cords are six feet in length and are U.L. Listed 18/3 wire The pump is not self-priming and requires a flooded suction Run Dry Protection to Keep You Cool The PM500 is a magnetically driven pump with no shaft seal. The pump is epoxy encapsulated, which allows the PM pump to run fully submerged in many liquids or in open air for complete moisture protection. When re- assembling the pump for service, make sure all “O“ rings are properly seated. See the repair parts list for a breakdown of replacement parts. Webasto is the North American exclusive distributor of KoolAir Pumps to the marine industry.
Technical Specifications
PM500
115 230
5011370 5011371
Webasto Part #
50Hz 60Hz 50Hz 60Hz
lpm
31
Maximum Flow
gpm
8.5 4.3
m
Maximum Flow
ft (psi)
19 (8.2) 3.4“ FPT 1/2“ MPT
Inlet
Outlet
psi bar
25
Maximum Internal Pressure
1.7
°F °C
130
Maximum Liquid Temp.
54
Packed Wieght
kg / lbs
3.85 / 8.5
TE / SUB 115V 60Hz 230V 50/60Hz
Motor Type
Phase
1
Volts Watts Amps
115 / 230
100
50Hz
1.0
Kw
0.037 2850
Rpm Volts Watts Amps
115 / 230 120 / 120 2.0 / 1.0
60Hz
Hp
1/20 3450 Cord
*All specifications and flow curves are based on pumping water Warranty: KoolAir Pumps are guaranteed only against defects in workmanship or materials for a period of two years from date of manufacture while pumping water.
Rpm
Electrical Connection
7.50 x 4.80 x 4.87in 19 x 12.2 x 12.3cm
Overall Pump Dim. (LxWxH)
Made with FlippingBook Online newsletter