KoolAir PM1000
Pump Features:
Run Dry Protection to Keep You Cool The PM1000 is a magnetically driven pump with no shaft seal. and the motor is Open Drop Proof (ODP). The hardened Carbon bushing allows for extended run dry time without any damage to the pump head. See the parts diagram for assembly instructions. Impeller may be trimmed to modify flows or compensate for liquids of higher viscosity. For application assistance, please contact KoolAir Pumps at 800-810-1053. Pumps 1,000 gallons/hr Run Dry and Thermal Overload Protection 115V & 230V One Phase, all cords are 56“ in length and are U.L. LISTED 18/3 wire Motors are rated as; continuous duty The pump is not self-priming and requires a flooded suction
Technical Specifications
PM1000
115V
5011372
Webasto Part #
230V
5011373
50Hz
lpm
54.8
Maximum Flow
60Hz
gpm
17.2
50Hz
m
6
Maximum Flow
Webasto is the North American exclusive distributor of KoolAir Pumps to the marine industry.
60Hz
ft (psi)
27 (11.7)
Inlet
1“ FPT
Outlet
1/2“ MPT
psi
50
Maximum Internal Pressure
bar
3.4
4.50
9.25
1.30
°F
130
OUTLET 1/2” (14MPT)
Maximum Liquid Temp.
1.50
°C
54
Packed Wieght
kg / lbs
8.02 / 17.70
CARBON BUSHING
O.D.P. 115V 60Hz 230V 50/60Hz
6.18
Motor Type
2.45
Phase
1
56” CORD
4 SLOTS .53 TYP.
NYLON
Volts
115 / 230
3.39
Watts
147
3.14
5.40
4.37
50Hz
Amps
1.2
Kw
0.093
Rpm
2850
*All specifications and flow curves are based on pumping water
Volts
115 / 230
Watts
216 / 207
60Hz
Amps
1.6 / 0.9
Kw
1/8
Warranty: KoolAir Pumps are guaranteed only against defects in workmanship or materials for a period of two years from date of manufacture while pumping water.
Rpm
3450
Electrical Connection
56“ Cord
9.25 x 4.37 x 6.18in 23.5 x 11.10 x 15.70cm
Overall Pump Dim. (LxWxH)
Made with FlippingBook Online newsletter