⎪ Maintenance and asset management ⎪
Ultra-reliable lubrication from SKF Eddie Martens, SKF product manager for Mapro, introduces the SKF System 24 TLSD single point automatic lubricator Series, which offers perfect lubrication solutions for seamlessly meeting both constant and while-running lubrication requirements.
L ubrication requirements are deter- mined by type of application and operating conditions. While certain applications need constant lubrica- tion, others may require lubrication only when equipment is running. Irrespective of the type of application and the lubrica- tion requirements of machine compo- nents, extreme reliability and accuracy are pre-requisites because under- and over-lubrication can result in cata- strophic and costly equipment failure and subsequent production stoppages. “The SKF System 24 TLSD Series has the perfect lubrication solution to seamlessly meet both application requirements,” says Eddie Martens, SKF Product Manager, Mapro. “There are two different types of lubricators in the TLSD Series – the electro-mechanical single point and cabled single point au- tomatic units. These TLSD lubricators deliver ultra-reliable lubrication and are ideal for applications that require additional monitoring.” The electro-mechanical single point automatic lubricator is ideal for critical applications that demand constant lu- brication. Performing optimally under variable temperatures, this lubrication unit is also suitable for remote installation in restrictive and hazardous locations, as well as for applications where high volumes of lubricant are required. The lubrication set is supplied complete with drive unit, battery
and compressors. The lubricator can be set to deliver the correct quantity of lubricant over a set time period and when the equipment or machine is running. Offering an alternative to the battery powered drive unit, this cabled drive unit has a cable to connect the direct power supply and signal transfer lines. The cabled single point automatic lubrica- tor is based on the proven single point automatic lubricator TLSD series. The main differentiators are the direct power supply from the machine’s control panel and the wired signal line to the machine’s PLC. The lubricator’s output signals can be used and stored within the equipment’s PLC. “Because the lubricator is powered from an ex- ternal power supply, it can be switched on and off when necessary,” notes Martens. “This allows improved ac- curacy of lubricant supplied compared to traditional manual re-lubrication techniques.” TLSD lubricators are suitable for direct and remote installation and have a maximum discharge pressure of 5.0 bar over the whole dispensing period. The replaceable cartridges are filled with 125 m ℓ or 250 m ℓ of SKF lubricant (grease or oil) that has been especially developed for bearing applications. The transparent cartridge reservoir allows fast, easy visual inspection. Multiple accessories are available for both TLSD lubricators. www.skf.com
pack, filled lubricant cartridge and matching support plate, making it ready for use. The cabled single point automatic lubri- cator has been specially developed for ap- plications that do not run continuously and is ideal for industrial equipment, elevators
The SKF System 24 TLSD electro-mechanical and cabled single point automatic lubricators can prevent under- and over-lubrication, which can both result in catastrophic and costly equipment failure and production stoppages.
January-February 2022 • MechChem Africa ¦ 9
Made with FlippingBook flipbook maker