Step 1:
Remove Vecta Unit from original box. Locate the TIDY BOX in the rear of the Vecta. Remove all items from the Tidy Box. Verify that you received everything on the Shipping List.
Step 2:
Plug in the Vecta to make sure it is operational. Watch for lights to come on in the Bubble Tube base and listen for the pump motor to come on. Watch for the lights to come on in the fiber optic tails
Step 3: BUBBLE TUBE
Locate Bubble Tube stopper plug at the top of the Vecta stand. Remove stopper plug on top shelf and insert funnel. Add 2 oz. of Bubble Tube Additive into the Bubble Tube via the funnel. Add approximately 5 gallons of DISTILLED WATER ONLY. Stop approximately 3” from the top. (Purchase an extra gallon to add when the water evaporates.) Add water while unit is running. Speed adjustment is the black knob on the front of the Bubble Tube base. Allows you to regulate the flow of bubbles to customize the sensory/distraction session. Switch jack is located in the front of the Bubble Tube base will accommodate any ¼” jack switch. For 1/8” jack switches, you can purchase a jack adaptor from your local electronics store. All TFH Switches come with the jack adaptor. Color Controller connection is the larger of the two “telephone” jacks. The smaller one is for factory use only.
Made with FlippingBook - professional solution for displaying marketing and sales documents online