Step 4: COLOR CONTROLLER
Unpack Color Controller with 6 ft. cord Locate the Color Controller jack at the base of the Bubble Tube. It is the larger of the two “telephone” looking jacks.
Connect the Color Controller to the Bubble Tube Base . Turn Controller “On” via the switch next to the cord.
Press all 4 buttons at the same time turns on and off the pump (affecting the bubble flow). Each button can be pressed individually or two or more at a time to produce up to 16 different color combinations.
Step 5: FIBER OPTICS
The Fiber Optic Light Source is installed under the bottom shelf of the Tidy Box. The Fiber Optic Strands are attached to the Light Source. Carefully remove the zip ties from the Fiber Optic Strands The Fiber Optic Strands will come on when you plug in the Vecta. They will cycle through different colors slowly and also a “sparkle” feature. If you do not want the Fiber Optics Strands on, you can unplug them from the power strip at the back of the Vecta cart.
Step 6: SUPER SNAP PROJECTOR
To mount the Super SNAP Projector to the top of the Vecta locate the black knob at the top of the Vecta stand next to the Bubble Tube stopper. Unscrew the knob and place the predrilled bracket at the base of the Super SNAP Projector over the bolt.
Made with FlippingBook - professional solution for displaying marketing and sales documents online