SyncroFlo RWH Systems_lr

Pumping System Solutions

PACKAGED PUMPING SYSTEMS FOR RAINWATER REUSE

FOR WHERE IT REALLY MATTERS Rainwater pumping systems, as manufactured by SyncroFlo, are completely skid mounted packages engineered and designed to provide safe, clean, non-potable water for use in irrigation, cooling tower make up water, toilet flushing, and many other applications not requiring potable water. These systems are supplied to include the transfer pump which pumps water from the rainwater reser-voir to the skid mounted rainwater processing and booster pumping system, as well as a completely skid mounted, integrated, and tested rainwater processing and booster pumping system. Because these systems are as described, total unit responsibility insures quality from system design through commissioning. Complete factory perfor-mance testing of the system assures that the system performs as designed and eliminates any site delays and confusion.

PACKAGED PUMPING SYSTEMS FOR RAINWATER REUSE

SyncroFlo, Inc.

2905 Pacific Drive Norcross, GA 30071 Tel: (770) 447-4443 www.syncroflo.com

Pumping System Solutions

RAINWATER HARVESTING SYSTEMS

All SyncroFlo’s pumping systems, including the rainwater pumping systems, are manufactured under the ISO 9001:2008 umbrella, and are UL listed as systems. The programmable controllers and control panels are designed within SyncroFlo’s 155,000 sqft facilit y, are also manufactured under the ISO 9001:2008 umbrella, and are UL 508 listed industrial control panels, assuring the customer of a well built reliable, and safe piece of equipment .

STANDARD FEATURES EQUIPMENT FOR INSTALLATION IN THE REMOTE RAINWATER RESERVOIR:

• Cast Iron submersible turbine transfer pump with Stainless Steel impellers, sized for rated flow of the rainwater system • CentriPro 6” submersible motor for the transfer pump • Discharge check valve for the transfer pump • Level transmitter EQUIPMENT FOR RAINWATER TREATMENT AND BOOSTER PUMPING SYSTEM:

• Complete alarm system with audible alarm and silence button • Ethernet equipped PLC for total system control • 7” touch screen display • Dye injection system • Backflow preventer solenoid bypass for operation when rainwater is not available • Discharge magnetic flowmeter • Outlet side flex connector to reduce stress on outlet piping

• Structural steel skid to support and unitize the system • Stainless steel (304 SS) transmission piping throughout the assembly • Inlet side flex connector to reduce stress on inlet piping • Pressure switch to detect loss of inlet pressure from the transfer pump • Inlet magnetic flowmeter • Coarse screen (0.045” perforated basket) wye strainer before filter • Ten micron (10µ) self-cleaning filter with three valve emergency bypass • Differential pressure gauge and pressure switch across strainer and across filter • Upstream UV disinfection units, one for each 30 GPM transferred • On-skid poly holding tank for treated water, with drain valve and level transmitter • Chlorination system for water in the holding tank • Level transmitter within the holding tank • Isolation valve and flex connector at holding tank outlet to booster pumping system • Booster pumping system with bladder tank, including: o Vertical multi stage booster pumps, stainless steel and cast iron o TEFC premium efficient three phase motors o Butterfly pump isolation valves o Wafer silent check valves

OPTIONAL DELETIONS

OPTIONAL ADDITIONS • Unmanaged Ethernet switch • Dry contact outputs (up to 10)

• Dye injection • Backflow preventer bypass • Bladder tank

o NEMA 1 enclosed VFDs for booster pumps o NEMA 12 controls enclosure, including:

PACKAGED PUMPING SYSTEMS FOR RAINWATER REUSE

SyncroFlo, Inc.

2905 Pacific Drive Norcross, GA 30071 Tel: (770) 447-4443 www.syncroflo.com

Pumping System Solutions

RAINWATER HARVESTING SYSTEMS

MODELS AVAILABLE CAPACITY

MODEL NUMBER SFIRW030-IHxx SFIRW060-IHxx SFIRW090-IHxx SFIRW120-IHxx SFIRW150-IHxx SFIRW180-IHxx SFIRW210-IHxx SFIRW240-IHxx SFIRW270-IHxx SFIRW300-IHxx

DISCHARGE PRESSURE xx = 30-150 PSI as required xx = 30-150 PSI as required xx = 30-150 PSI as required xx = 30-150 PSI as required xx = 30-150 PSI as required xx = 30-150 PSI as required xx = 30-150 PSI as required xx = 30-150 PSI as required xx = 30-150 PSI as required xx = 30-150 PSI as required

SKID FOOTPRINT 8’ X 16’ 8’ X 16’ 8’ X 16’ 8’ X 16’ 8’ X 16’

30 GPM system 60 GPM system 90 GPM system 120 GPM system 150 GPM system 180 GPM system 210 GPM system 240 GPM system 270 GPM system 300 GPM system

10’ X 20’ 10’ x 20’ 10’ x 20’ 10’ x 20’ 10’ x 20’

AVAILABLE VOLTAGE (+/- 5%) • 460/3/60 • 230/3/60 • 208/3/60

• 230/1/60 (Single phase horsepower limits of submersible motor limit system capacity)

INFORMATION REQUIRED TO RECEIVE A BUDGETARY QUOTE • Voltage available • Advise if there are stringy materials in the water (algae, grass clippings, etc.) • Advise entrained solids content • Discharge GPM required (30 GPM increments up to and including 300 GPM) • Discharge PSI required (30-150 PSI range available) • Depth in feet and capacity in gallons of rainwater reservoir

• Elevation (in feet) change from top of reservoir to mounting slab for the rainwater treatment and booster system • Distance (in feet) from point at which the transfer pump wil be mounted within the rainwater reservoir to the rainwater treatment and booster system inlet connection

PACKAGED PUMPING SYSTEMS FOR RAINWATER REUSE

SyncroFlo, Inc.

2905 Pacific Drive Norcross, GA 30071 Tel: (770) 447-4443 www.syncroflo.com

Pumping System Solutions

RAINWATER HARVESTING SYSTEMS

Rainwater Pumping Systems Model Numbers and Capacities

Model SFIRW030-IHxx SFIRW060-IHxx SFIRW090-IHxx SFIRW120-IHxx SFIRW150-IHxx SFIRW180-IHxx SFIRW210-IHxx SFIRW240-IHxx SFIRW270-IHxx SFIRW300-IHxx SystemGPM 30 60 90 120 150 180 210 240 270 300 Inlet Size 3" 3" 3" 3" 3" 4" 4" 4" 4" 4" Flex Connector 3" 3" 3" 3" 3" 4" 4" 4" 4" 4" Flowmeter Size 3" 3" 3" 3" 3" 4" 4" 4" 4" 4" 10m Forsta model B2-90 B2-90 C2-90 C2-90 CL2-90 CXL3-90 E4-90-FLG E4-90-FLG F4-90-FLG F4-90-FLG 10m in2 120 240 288 288 576 720 900 900 1152 1152 Qty 1 1 1 1 1 1 1 1 1 1 Screen Type Woven Woven Woven Woven Woven Woven Woven Woven Woven Woven Wye Strainer Size 3" 3" 3" 3" 3" 4" 4" 4" 4" 4" Wye Strainer Qty 1 1 1 1 1 1 1 1 1 1 UV Pure Upstream NC 30-75 30 GPM 30 GPM 30 GPM 30 GPM 30 GPM 30 GPM 30 GPM 30 GPM 30 GPM 30 GPM

Qty

1

2

3

4

5

6

7

8

9

10

Day Tank Gallons

1000

1000

1000

1000

1000

2500

2500

2500

2500

2500

Booster Mfld size

3"

3"

3"

3"

3"

4"

4"

6"

6"

6"

Booster Pump Size (2 each) Booster Pump Dis - charge Pressure

1.25X1.25 (30 GPM each)

2x2 (45 GPM each)

2X2 (60 GPM each)

2x2 (75 GPM each)

2x2 (90 GPM each)

2x2 (105 GPM each)

2x2 (120 GPM each)

2.5x2.5 (135 GPM each)

2.5x2.5 (150 GPM each)

1.25x1.25 (15 GPM each)

30-150 PSI

30-150 PSI

30-150 PSI

30-150 PSI

30-150 PSI

30-150 PSI

30-150 PSI

30-150 PSI

30-150 PSI

30-150 PSI

Flowmeter Size

3"

3"

3"

3"

3"

4"

4"

4"

4"

4"

Backflow Size

2"

2"

2"

2"

2"

3"

3"

3"

3"

3"

Cla-Val 136-01

2"

2"

2"

2"

2"

3"

3"

3"

3"

3"

ProMinent Cl2 Hach

CL17

CL17

CL17

CL17

CL17

CL17

CL17

CL17

CL17

CL17

Ebara 3U4 40- 160-1HP

Ebara 3U4 40- 160-1HP

Ebara 3U4 40- 160-1HP

Ebara 3U4 40- 160-1HP

Ebara 3U4 40- 160-1HP

Ebara 3U4 40- 160-1HP

Ebara 3U4 40- 160-1HP

Ebara 3U4 40- 160-1HP

Ebara 3U4 40- 160-1HP

Ebara 3U4 40- 160-1HP

Recirc

Recirc Valve sizing

2"

2"

2"

2"

2"

2"

2"

2"

2"

2"

ProMinent Dye Flex Connector

3"

3"

3"

3"

3"

4"

4"

4"

4"

4"

Manifold Size

3"

3"

3"

3"

3"

4"

4"

4"

4"

4"

Discharge Size

3"

3"

3"

3"

3"

4"

4"

4"

4"

4"

Page 1 Page 2 Page 3 Page 4

Made with FlippingBook - professional solution for displaying marketing and sales documents online