Milwaukee PPE Catalogue

2025 PPE CATALOGUE

milwaukeetool.eu

STAY SAFE. STAY PRODUCTIVE.

UNDERSTANDING THE GUIDANCE

SAFETY. TAKEN SERIOUSLY. By designing cordless tools without compromise, and creating a range of PPE designed around user needs, at MILWAUKEE ® , we’re making the jobsite safer and more productive every day. Today, we’re proud to boast over 215 Cordless Tools on our M18™ platform and over 95 Cordless Tools on our M12™ platform, eliminating trip hazards from the jobsite. We’ve redefined the light equipment market with the launch of our MX Fuel™ range, preventing the need for petrol on the jobsite with the launch of key tools including the 350mm Cut Off Saw, and Cordless Breaker. Personal Protective Equipment has seen little innovation over the years, driving users to modify their gear to better meet their needs. By taking time to understand our users’ needs, we have developed PPE from the ground up, enabling users to adapt to each job. This has paved the way for innovative solutions such as our new safety glasses that can be worn all day with lasting, fog-free lenses.

SAFETY GLASSES USING THE CORRECT

OF JOBSITE EYE INJURIES EYE PROTECTION COULD REDUCE THE SEVERITY OR PREVENT 90%

STAY SAFE. STAY PRODUCTIVE.

(preventblindness.org, 2019)

HEAD PROTECTION STANDARDS

EN397: EN12492 HEAD PROTECTION

GLOVES 70% OF WORKERS WHO EXPERIENCED

EN397 is a European standard that sets out the requirements for industrial safety helmets. The standard applies to helmets intended to provide protection against falling objects and other types of head impact in industrial settings. The EN397 standard specifies a number of requirements that a helmet must meet to be considered suitable for industrial use. These requirements include: 1. Resistance to impact: The helmet must be able to withstand a specified level of impact energy without breaking or deforming. 2. Penetration resistance: The helmet must be able to resist the penetration of objects that may strike the head, such as nails, screws or sharp objects. 3. Shock absorption: The helmet must be designed to absorb the force of an impact and distribute it evenly across the head.

HAND INJURIES WERE NOT WEARING THE CORRECT GLOVES

(Manufacturing.net, 2019)

A FALLING OBJECT HIGHEST CAUSE OF FATALITY IS THE ON A JOBSITE 3 RD

4. Retention system: The helmet must have a chin strap or other retention system to keep it securely on the head.

5. Field of vision: The helmet must provide an adequate field of vision for the wearer.

MILWAUKEE® is committed to creating innovative solutions that help users stay safe and stay productive on the jobsite.

6. Resistance to flame: The helmet must not ignite or continue to burn after exposure to a flame.

7. Electrical insulation: The helmet must provide protection against electric shocks.

EN397 is one of the most widely recognized standards for industrial safety helmets in Europe and is often used as a basis for certification and testing by third-party organizations.

(Peoplesafe.co.uk, 2019)

milwaukeetool.eu

DISPOSABLE RESPIRATORS

EN12492

EN 149:2001+A1:2009 – RESPIRATORY PROTECTIVE DEVICES – HALF MASK

EN12492 is a European standard that sets out the requirements for mountaineering helmets. The standard applies to helmets intended to provide protection against impacts, penetration, and lateral deformation for mountaineers, rock climbers, and other vertical activities. The EN12492 standard specifies a number of requirements that a helmet must meet to be considered suitable for mountaineering use. These requirements include:

FORCE TRANSMISSION (SIDE,FRONT, REAR)

FORCE TRANSMISSION (TOP)

PENETRATION (TOP)

STANDARDS

FILTERING LEVEL

APPLICATIONS MATERIALS

FFP LEVEL

49J

29J

FFP3 FFP3 FFP3 FFP3 FFP3 FFP3 FFP2 FFP2 FFP3 FFP2 FFP3 FFP2 FFP3 FFP2 FFP2 FFP3 FFP2 FFP2 FFP2 FFP1 FFP1

Asbestos

FFP1

FFP2 FFP3

Cutting, Drilling, Grinding, Sanding

Brick Dust (Can contains Silica) Cement (Can contains Silica) Concrete (Can contains Silica)

5KG 1M

3KG 1M

80% 94% 99%

EN397

Glass Dust

EN 149 provides requirements, and testing method for respiratory protective devices to protect against particles.

Resistance to impact: The helmet must be able to withstand a specified level of impact energy without breaking or deforming.

Hard Wood (Oak, Tropical Wood, Teak, MDF)

Metal

MAX FORCE: 5.000N

3 classes of protection: FFP1 / FFP2 / FFP3 FFP = Filtering Facepieces

Mild Steel

2. Penetration resistance: The helmet must be able to resist the penetration of objects that may strike the head, such as rocks or ice. 3. Retention system: The helmet must have a chin strap or other retention system to keep it securely on the head during an impact. 4. Lateral deformation: The helmet must be designed to prevent excessive lateral deformation during an impact, which can cause injury to the neck or brain.

100J

29J

25J

Mineral Dust (Can contains Silica/Asbestos)

Paint Chrome Free

5KG 2M

3KG 1M

5KG 0.5M

NR = Not Reusable

Paint with Chrome, Arsenic, Copper

Plastic

EN12492

D = Dolomite (protection included when D mentioned)

Silica

Soft Wood (Pine, Lumber)

MAX FORCE: 10.000N

Soldering

Stainless Steel

Field of vision: The helmet must provide an adequate field of vision for the wearer.

Steel

To meet the EN12492 standard, a helmet must undergo a series of tests, including an impact test, a penetration test, and a retention system test. The helmet is also tested for lateral deformation, field of vision, and ventilation. EN12492 is one of the most widely recognized standards for mountaineering helmets in Europe and is often used as a basis for certification and testing by third-party organizations.

Varnish

6. Ventilation: The helmet must have sufficient ventilation to prevent overheating during physical activity. 7. Compatibility with other equipment: The helmet must be compatible with other equipment, such as goggles or headlamps. 8. Durability: The helmet must be designed to withstand normal wear and tear associated with mountaineering activities.

Waste Sorting

Sweeping Floors

Pollen

EN 50365

EN 50365 is the European standard for electrically insulating helmets used for electrical work up to 1,000 volts AC or 1,500 volts DC. It dictates the necessary design, material, and testing requirements to ensure the wearers safety. Compliance with this standard is crucial for protecting individuals working in electrical environments. MILWAUKEE ® ’s BOLT 100 hard hat and BOLT 200 helmet fully comply with EN 50365, and is certified for use up to 1000V A.C. and 1500V D.C. in both vented and unvented versions.

HEARING PROTECTION EN 352-2:2020 HEARING PROTECTORS: EARPLUGS

milwaukeetool.eu

The EN 352 is the European standard for hearing protection which proves that the product protects adequately against noise. EN 352-2 is the standard for Ear Plugs. The EN 352 is the European standard for hearing protection which proves that the product protects adequately against noise. EN 352-2 is the standard for Ear Plugs.

SNR (Single Number Rating) = attenuation in dB H/M/L = High-/ Medium- /Low-frequency attenuation value Noise – SNR = residual noise level Higher SNR or H/M/L value = higher noise attenuation SNR (Single Number Rating) = attenuation in dB H/M/L = High-/ Medium- /Low-frequency attenuation value Noise – SNR = residual noise level Higher SNR or H/M/L value = higher noise attenuation

EN 352-2:2020 HEARING PROTECTORS: EARPLUGS

SAFETY GLASSES

Hearing protection is mandatory when noise exceeds 85 dB (upper action level).

EN 166:2001 PERSONAL EYE-PROTECTION

Over protection

Employers must provide hearing protection

Hearing protection is mandatory when noise exceeds 85 dB (upper action level).

Employees must wear hearing protection

Over protection

Employers must provide hearing protection

The EN 166 standard specifies requirement for personal eye-protectors, used to combat various hazards as encountered across numerous industries which are likely to damage the eye or impair vision. The EN 170 standard specifies requirements for ultraviolet filters, while EN 172 refers to the sun glare filtration for industrial use. All MILWAUKEE ® safety glasses are certified according to EN 166, to guarantee the eye protection and the resistance to impact. The clear safety glasses are EN 170 certified, to offer an UV protection, even with clear lenses, while the tinted and polarised safety glasses are EN 172 certified to offer a solar protection, ideal for the jobsite and also during leisure time.

Target Zone

Employees must wear hearing protection

<70

>110

90 100

Target Zone

LOWER ACTION LEVEL

UPPER ACTION LEVEL

<70 Noise in dB (A) 30 60 70

>110 Breaker 109dB (A) 100 110 140 >150

80 80

85 85

90 100 – 90

Breaker 77dB (A)

Noise attenuation 32dB (A)

LOWER ACTION LEVEL

UPPER ACTION LEVEL

Noise in dB (A)

–

Breaker 77dB (A)

Noise attenuation 32dB (A)

Breaker 109dB (A)

MILWAUKEE ® PPE SOLUTIONS | 05

A B C D E

F G HI JKLMNO

MILWAUKEE ® PPE SOLUTIONS | 05

SNR (Single Number Rating) = attenuation in dB H/M/L = High-/ Medium- /Low-frequency attenuation value

Noise – SNR = residual noise level Higher SNR or H/M/L value = higher noise attenuation

1.7

MT 1 FT

166

The REDLITHIUM USB™ Jobsite Earbuds feature advanced technology that not only meets the EN 352-2 standards but also provides additional functionalities for the modern jobsite. Jobsite Awareness Mode ensures that users can safely hear necessary environmental sounds while being protected from harmful noise levels. When fully charged, the earbuds provide up to 10 hours of continuous use, with an additional 70 hour’s run time from the case. The earbuds are designed to limit entertainment audio signals to a safe level of 82 dB(A), particularly for Bluetooth A2DP, HFP, and HSP inputs, thereby preventing overexposure to high volume levels that can damage hearing. To maintain their effectiveness, the foam inserts should be regularly inspected for any signs of wear and tear, such as deterioration or cracking, and cleaned with a damp cloth. It is recommended to replace the inserts periodically to ensure optimal performance and hygiene.

• 2C-1.2 MT 1FT CE • 2

Same frame marking for all 6 SKUs • MT 166 FT CE • MT = MILWAUKEE ® Tool • 166 = Name of the EN standard • F = Impact resistance

= EN 170 (UV filters standard)

• C = Unimpaired color (clear lenses) • 1.2 = Protection level (1.2 is the lightest) • MT = MILWAUKEE ® Tool • 1 = Optical class (avoid diziness) • F = Impact resistance

(only F can apply to safety glasses, A & B are for safety goggles) = Extreme temperatures resistance (-5° / +55°)

• T

• CE = European Certification

(only F can apply to safety glasses, A & B are for safety goggles) = Extreme temperatures resistance (-5° / +55°)

• T • K

= Anti-scratch

• N = Anti-Fog • CE = European Certification

HEARING PROTECTION

EN 352-2:2020 HEARING PROTECTORS: EAR MUFFS

Hearing protection is crucial on the jobsite to prevent hearing damage from excessive noise exposure. It maintains worker safety, concentration, and productivity. Prioritizing hearing protection safeguards workers’ long-term hearing health from permanent damage that may occur and creates a safer work environment.

EN 352-3 is a standard for earmuffs designed to be mounted on protective helmets or head/face protection devices. The standard ensures compatibility, effectiveness, and safety by specifying materials, secure fit, noise reduction, compliance markings, and user instructions. Adhering to EN 352-3 guarantees reliable hearing and head/face protection in hazardous environments.

The EN 352 standard that all MILWAUKEE ® hearing protection products meet, provides workers with the protection they need to Stay Safe and Stay Productive on the jobsite.

All MILWAUKEE ® ear muffs that are attached to protective hard hats/helmets fully meet the EN 352-3 standards.

EN 352-2:2020 HEARING PROTECTORS: EARPLUGS

The EN 352-2 standard regulates earplugs that are inserted directly into the ear canal. The standard ensures the earplugs are made with appropriate materials, designed for comfort and effectiveness, meet performance benchmarks, carry necessary markings, and provide clear instructions for users. Adhering to this standard promotes the safety and reliability of earplugs for protecting hearing in noisy environments. When noise exceeds 85 dB on the jobsite, it is mandatory for employers to provide hearing protection that meets these requirements. All MILWAUKEE ® earplugs that are inserted into the ear canal fully meet the EN 352-2 standards and protect workers from long term damage.

milwaukeetool.eu

HAND PROTECTION

CHEMICAL GLOVES

EN 388:2016 PROTECTIVE GLOVES AGAINST MECHANICAL RISKS

EN ISO 374-1: 2016 PROTECTIVE GLOVES AGAINST DANGEROUS CHEMICALS AND MICRO-ORGANISMS

EN 388

The EN ISO 374-1:2016 standard specifies the requirements for gloves designed to protect against dangerous chemicals and micro-organisms. This includes protection through resistance to degradation, permeation, and penetration by chemicals. Gloves must meet key performance criteria, such as resistance to chemical exposure and maintaining material integrity. Chemicals can penetrate through defects in the glove material, such as holes. Degradation occurs when the glove material is negatively impacted by chemical contact, and the degradation percentage must be included in the user instructions. Permeation refers to chemicals breaking through the glove material at a molecular level, and gloves are tested to ensure they meet minimum breakthrough times. Type A gloves must withstand a breakthrough time of at least 30 minutes against 6 or more test chemicals. Type B gloves must meet the same time requirement for at least 3 test chemicals, and Type C gloves must withstand 10 minutes for at least 1 test chemical.

4 3 C X

Rating

The EN 388 standard specifies requirements, test methods, marking and information to be supplied for protective gloves against the mechanical risks of abrasion, blade cut, tear, puncture and, if applicable, impact. The impact protection has to fully encompass the back of hand, including the fingers. This standard is intended to be used in conjunction with EN ISO 21420. All MILWAUKEE ® hand protection solutions are certified according to both EN ISO 21420 and EN 388 standards, the rating given varies for each type of gloves. EN ISO 21420 is the European general requirement and test method standard for protective gloves.

Abrasion

1-4

Cut (Coup Test)

1-5

Tear

1-4

Puncture

1-4

Cut (TDM-100 Test)

A-F

Impact Protection

P,F

X= Not tested

P= Pass

F= Fail

WINTER GLOVES

EN 511:2006 PROTECTIVE GLOVES AGAINST COLD

EN 511

1 X

Min – Max

Convective Cold

0-4

The EN 511 standard specifies the requirements and test methods for protective gloves against convective cold or contact cold down to - 50 ° C solid. The cold can vary with the climatic conditions or one professional activity. This standard is intended to be used in conjunction with EN 388 and EN ISO 21420.

Contact Cold

0-4

Water Permeability

0-1

X= Not tested

milwaukeetool.eu

HIGH VISIBILITY

CLOTHING

EN ISO 20471:2013 HIGH VISIBILITY CLOTHING

EN 13758-1:2001 TEXTILES - SOLAR UV PROTECTIVE PROPERTIES - PART 1: METHOD OF TEST FOR CLOTHING FABRICS

The EN ISO 20471 standard specifies requirements for high visibility clothing to ensure it is capable of visually signalling the user’s presence. High visibility clothing ensures the user can be seen in all light conditions and is divided into 3 performance classes depending on the requirements.

The EN 13758-1 standard specifies the requirements and test methods for clothing designed to offer ultraviolet (UV) protection. This standard ensures that the clothing fabric meets the criteria for UV protection and is capable of effectively blocking harmful UV rays, with a rating of UPF50+ (all MILWAUKEE ® EN 13758-1 certified products carry a UPF50+ rating) . This standard is intended to be used in conjunction with other relevant textile and clothing standards to ensure comprehensive protection and performance. MILWAUKEE ® products that hold the EN 13758 certification are: PVA Cooling Towel and Cooling Microfiber Towel, Skull Cap, Work T-Shirts, Warm Weather T-Shirts, Baseball Caps, Performance Caps, Red Performance Neck Gaiters.

The MILWAUKEE ® high visibility vests are intended for multiple applications and are class 2 certified.

Class 1

Class 2

Class 3

Reflective Tape

0.10 sqm

0.13 sqm

0.20 sqm

Fluorescent Material

0.14 sqm

0.50 sqm

0.80 sqm

Level of visibility

Lowest

Intermediate

Highest

KNEE PADS

Wearing knee protection on the jobsite is important for several reasons:

• Reduce the risk of knee injuries: Knee pads reduce the risk of knee injuries that occur from kneeling and crawling. This can help prevent long-term damage to the knees, such as joint pain, arthritis, and other knee-related conditions. • Increase comfort and productivity: Knee protection helps to reduce the discomfort and fatigue that can occur from working on hard surfaces or kneeling for long periods.

• Meet safety regulations: In many industries and job sites, knee protection is required by law or industry standards to ensure worker safety. Wearing knee protection can help ensure compliance with these regulations and prevent penalties for non-compliance.

RIS-3279-TOM (ONLY ORANGE CONTRACTOR HI-VIS VEST)

RIS-3279-TOM (formerly GO-RT 3279) is a high visibility standard specifically for the UK rail industry, unlike the broader EU-wide EN standards. Its purpose is to ensure rail workers near tracks are highly visible to approaching trains or other traffic. The standard requires compliance with color specifications in BS EN 20471 clause 5.1.2 to ensure a specific orange shade, avoiding red hues. The exact chromaticity coordinates for the fluorescent orange color are X: 0.588, Y: 0.371, with a luminance factor of at least 0.4. While the color tolerance follows EN 20471, there is no tolerance for the luminance factor.

EN 14404:2004+A1:2010 KNEE PROTECTORS FOR WORK WHEN KNEELING

EN 14404

In Europe, the most commonly recognized knee protection standard for workers on job sites is EN 14404:2004+A1:2010. This standard specifies the requirements and test methods for knee protectors used in tasks where the user is frequently kneeling. The standard covers the design, construction, performance, and marking of knee protectors, and it is applicable to all types of knee protectors used in occupational environments, including those worn over or integrated into clothing. Knee pads are tested based on their impact absorption, pressure distribution of the entire surface and protection against penetration of sharp or pointy objects. EN 14404:2004+A1:2010 is recognized throughout the European Union and is widely used by manufacturers, employers, and workers to ensure that knee protectors provide the necessary level of protection and performance for workers who kneel frequently as part of their job duties.

Class 1

Class 2

Class 3

Reflective Tape

0.10 sqm

0.13 sqm

0.20 sqm

Fluorescent Material

0.14 sqm

0.50 sqm

0.80 sqm

Level of visibility

Lowest

Intermediate

Highest

Type 1

Knee pads independent of other clothing, fastened around the legs

Type 2

Knee pads in foam or other padding, secured in pockets on the legs, or which is permanently attached to the pants.

Type 3

Knee pads not stuck to the body but placed in position as the user moves around.

Knee pads, which is part of a unit with additional functions, such as the framework for support to stand up, or kneeling seat. Can be worn on the body, or be independent.

Type 4

EN 14404

Protection Class 0

Flat floor surfaces

Protection Class 1

Flat or uneven floor surface. Protects against penetration by a force of at least (100 ± 5 ) N

EN 14404

Flat or uneven floor surfaces under severe conditions. Protects against penetration by a force of at least (250 ± 10) N

Protection Class 2

milwaukeetool.eu

SAFETY FOOTWEAR

EN ISO 20345:2022 SAFETY FOOTWEAR

The EN ISO 20345:2022 standard outlines the requirements for safety footwear designed for general use. This includes protection against mechanical risks, slip resistance, thermal hazards, and ergonomic performance. Safety footwear must meet all fundamental criteria, such as measurements, construction quality, material durability, and resistance to external factors. Depending on the specific hazards in the workplace, additional requirements may be necessary. In these cases, the footwear must meet the relevant additional standards and be appropriately marked. Each MILWAUKEE® shoe’s specific performance ratings are indicated on the tongue label and the shoe box sticker.

Footwear made entirely from leather and other materials

(Metal insert type P) Penetration resistant outsole: Lowest penetration value required shall not be less than 1100N (Non-metallic insert type PL) Penetration resistant outsole: Average penetration force shall not be lower than 1100 N and no single value must be lower than 950 N

Class I

All entirely moulded footwear

Class II

Hybrid footwear that cannot be classed as either I or II.

SBH

Safety toe cap protection only, tested with 200 J impact and 15 KN compression force.

(Non-metal insert type PS) Penetration resistant outsole: Average penetration value shall not be less than 1100N

Class 1 + Closed heel area + SB + A + E

Anti-static: Electrical resistance between foot and ground of between 0.1 and 1000 Mega Ohms*

As S1 + WPA

Partially conductive footwear. The electrical resistance shall not be greater than 0.1 Mega Ohms between foot and ground*

(Metal insert type P) as S2 + P + Cleated Outsole

Insulation against cold: 30 minutes at -17°C, the decrease shall not be more than 10°C Insulation against heat: 30 minutes at 150°C, the rise shall not be higher than 22°C Energy absorption of the seat region: Energy absorbed to be not less than 20J Water penetration and absorption (water resistant and breathable)

(Non-metal insert type PL) as S2 + PL + Cleated Outsole

S3L

(Non-metal insert type PS) as S2 + PS + Cleated Outsole

S3S

Upper material of all Rubber or Polymeric as SB + Closed heel area + A + E

WPA

(Metal insert type P) as S4 + P + Cleated Outsole

Ankle protection: 10N impact means transferred force shall not exceed 10KN and no single value shall exceed 15KN

(Non-metal insert type PL) as S4 + PL + Cleated Outsole

Water resistant footwear (waterproof membrane)

S5L

(Non-metal insert type PS) as S4 + PS + Cleated Outsole

Cut resistant upper: Cut resistance to exceed 2.5 on the index

S5S

As S2 + WR

Metatarsal protection 100J impact energy

(Metal insert type P) as S3 + WR

SR slip resistance test features glycerine on ceramic tile surface. Replaces SRA SRB SRC. No test given – for footwear featuring spikes or studs on sole.

(Non-metal insert type PL) as S3 + WR

S7L

(Non-metal insert type PS) as S3 + WR

S7S

Heat resistant outsole compound: Shall withstand 300°C for 60 seconds.

HRO

Resistance to fuel oil

Ladder grip

Scuff cap abrasion

BOLT ™ 100 BOLT ™ 200 milwaukeetool.eu ADAPT TO YOUR JOBSITE The new MILWAUKEE ® BOLT Helmets and Bolt Accessories allow each user to tailor their Head protection to best meet the demands of the jobsite. INDUSTRIAL HARD HAT WORKING AT HEIGHT HELMET

Foam progressively stiffens when impacted: distributes pressure evenly across entire head when impacts, independent of impact location. TECHNOLOGY INNER FOAM LEXAN SHELL SUPERIOR IMPACT RESISTANCE

For use on low voltage installations EN50365. INSULATED ELECTRICALLY ABS SHELL LIGHTWEIGHT

COLOURS AVAILABLE

MULTI ACCESSORIES COMPATIBILITY Across BOLT 100 and BOLT 200 products ATTACHMENTS ADJUSTABLE CHIN STRAP PREMIUM RATCHET

BOLT ™ Visor Universal Tinted 4932479942 Universal Clear 4932479941

BOLT ™ Face Shield Universal Clear 4932479939 Universal Tinted 4932479938

BOLT ™ Mesh Face Shield Universal 4932479940

BOLT ™ Sunshade Yellow 4932492101

BOLT ™ LP Earmuffs 4932478878

BOLT ™ Low Profile Headlamp Mount 4932493350

BOLT ™ HP Earmuffs 4932478877

BOLT ™ Headlamp 4933479902

UNVENTED

VENTED

UNVENTED

ITEM NO.

DESCRIPTION

ITEM NO.

DESCRIPTION

ITEM NO.

DESCRIPTION

ITEM NO.

DESCRIPTION

4932479252 4932479253 4932479254 4932479255 4932480655 4932480656 4932480657 4932480658

BOLT 200 White Unvented BOLT 200 Yellow Unvented BOLT 200 Red Unvented BOLT 200 Black Unvented BOLT 200 Blue Unvented BOLT 200 Green Unvented BOLT 200 Orange Unvented BOLT 200 Hi Vis Unvented*

4932478141 4932478918 4932478919 4932478920 4932480651 4932480652 4932480653 4932480654

BOLT 200 White Vented BOLT 200 Yellow Vented BOLT 200 Red Vented BOLT 200 Black Vented BOLT 200 Blue Vented BOLT 200 Green Vented BOLT 200 Orange Vented BOLT 200 Hi Vis Vented*

4932478122 4932478913 4932478916 4932478917 4932478914 4932478915 4932480663 4932480664

BOLT 100 White Vented BOLT 100 Yellow Vented BOLT 100 Red Vented BOLT 100 Black Vented BOLT 100 Blue Vented BOLT 100 Green Vented BOLT 100 Orange Vented BOLT 100 Hi Vis Vented*

4932479246 4932479247 4932479250 4932479251 4932479248 4932479249 4932480665 4932480666

BOLT 100 White Unvented BOLT 100 Yellow Unvented BOLT 100 Red Unvented BOLT 100 Black Unvented BOLT 100 Blue Unvented BOLT 100 Green Unvented BOLT 100 Orange Unvented BOLT 100 Hi Vis Unvented*

milwaukeetool.eu

BOLT ™ CUSTOMISATION

BOLT ™ 100

■ BOLT ™ system – ensure compatibility among a large range of accessories with an easy and intuitive attachment system. ■ Extremely comfortable and easy to adjust wheel ratchet adjustment system. ■ Shell made of ABS for light weight. ■ 6 points suspension for more comfort. ■ Changeable and comfortable sweatband. ■ Size: 52 - 68 cm. ■ 8 colours available with glossy finish: white, yellow, orange, red, black, green, blue and high visibility yellow. ■ Certified as per EN 397:2012 with optional requirement for Multi Metal, extreme temperatures -30°C, Lateral Deformation, and Electrical insulation 440 V a.c. (electrical insulation 440V under EN397 just on the unvented version). ■ Certified as per EN 50365:2002 Electrical class 0 for installations with nominal voltage up to 1000V A.C. and 1500V D.C. in vented and unvented version.

CUSTOMISE YOUR BOLT ™ 200 HELMET

CUSTOMISE YOUR BOLT ™ 100 HARD HAT

placeholder

ORDER INFORMATION

PRINT CAPABILITIES

• • • •

4 printing zones

• •

MOQ: BOLT™ 100= 25pc / BOLT™ 200= 24pc Delivery time: 2-3 weeks after order confirmation

Pack quantity

Min. order quantity

Description

Article Number

EAN Code

Digital / laser printing

Text printing

• Request more information from local Milwaukee sales representative

4932478122 4932478913 4932478914 4932478915 4932478916 4932478917 4932480663 4932480664

BOLT ™ 100 White Vented - 1pc BOLT ™ 100 Yellow Vented - 1pc BOLT ™ 100 Blue Vented - 1pc BOLT ™ 100 Green Vented - 1pc BOLT ™ 100 Red Vented - 1pc BOLT ™ 100 Black Vented - 1pc BOLT ™ 100 Black Vented - 1pc

1 1 1 1 1 1 1 1

4058546340551 <price 4058546361952 <price 4058546361969 <price 4058546361976 <price 4058546361983 <price 4058546361990 <price 4058546409487 <price 4058546409494 <price

<price <price <price <price <price <price <price <price <price <price <price <price <price <price <price <price

No colour limitation for logos or images

INTERACTIVE

ADD YOUR LOGO

Real-time design

Most file types accepted

BOLT ™ 100 Hi-Vis Yellow Vented - 1pc

1. Upload the logos to the online visualiser and view your customised helmet in 3D. 2. Contact your Milwaukee sales representative to confirm the order through the online Order Portal with the corresponding Milwaukee Dealer. 3. Sign the proofing document provided via the online Order Portal. 4. Follow up on the status via the online Order Portal with your dealer.

Pack quantity

Min. order quantity

Description

Article Number

EAN Code

4932479246 4932479247 4932479248 4932479249 4932479250 4932479251 4932480665 4932480666

BOLT ™ 100 White Unvented - 1pc BOLT ™ 100 Yellow Unvented - 1pc BOLT ™ 100 Blue Unvented - 1pc BOLT ™ 100 Green Unvented - 1pc BOLT ™ 100 Red Unvented - 1pc BOLT ™ 100 Black Unvented - 1pc BOLT ™ 100 Orange Unvented - 1pc BOLT ™ 100 Hi-Vis Yellow Unvented - 1pc

1 1 1 1 1 1 1 1

4058546370404 <price 4058546370411 <price 4058546370428 <price 4058546370435 <price 4058546370442 <price 4058546370459 <price 4058546409500 <price 4058546409517 <price

BOLT ™ headlamp 600 lumens USB rechargeable

FRONT

BACK

■ 600 lumens of multi-directional TRUEVIEW ™ high definition light output ■ Full BOLT ™ compatibility with a low profile design that works with all BOLT ™ helmets, visors and face shields ■ Mount connects to BOLT ™ helmet without straps ■ 70° pivoting light head to help users direct light where it is needed most ■ 4 modes to manage output or run time with up to 32 hours of run time on (1) USB 3.0 Ah battery ■ Fuel gauge allows fast checking of REDLITHIUM ™ USB battery charge ■ Conveniently charge REDLITHIUM ™ USB battery internally with micro-USB Type C cable from USB power source or AC outlet (wall plug not included)

SAFETY HELMET / HARD HAT LOGO PALCEMENT

■ IP54 rating, light is protected from dust and falling water ■ Jobsite tough micro-USB braided cable with metal ends ■ Includes USB cable

LEFT

RIGHT

Pack quantity

Min. order quantity

Description

Article Number

EAN Code

4933479902

USB rechargeable BOLT headlamp 600 lumens

4058546376963 <price

<price

milwaukeetool.eu

BOLT ™ 200

BOLT ™ Low-Profile Headlamp Mount

■ Shell made of Lexan ™ - ultra resistant to impacts. ■ BOLT ™ system – ensure compatibility among a large range of accessories with an easy and intuitive attachment system. ■ Extremely comfortable and easy to adjust wheel ratchet adjustment system. ■ Foam suspension provides consistent impact performance independent of impact location. ■ Comfortable inner foam suspension paired with a crown liner for extra comfort.

■ Our BOLT ™ Low-Profile Headlamp Mount allows headlamp compatibility with BOLT ™ eye visors and select BOLT ™ full face shields. ■ The mount is reversible and secures into the Front or Rear BOLT ™ Mount of your MILWAUKEE© head protection for added convenience. ■ The BOLT ™ Low-Profile Headlamp Mount works with Milwaukee© and most other professional brand headlamps. ■ This low-profile headlamp mount is part of the BOLT ™ accessory system which allows users to secure accessories simultaneously.

■ Breathable, washable and replaceable premium sweatband. ■ Breathable, washable and replaceable premium crown liner.

■ Vented version delivered with a mounted EN 12492 certified chinstrap (colour coded red). ■ Unvented version delivered with a mounted EN 397 certified chinstrap (colour coded grey). ■ Certified as per EN 397:2012 with optional requirement for Extreme temperatures – 40°C (vented and unvented version), Lateral Deformation (vented and unvented version) and Electrical insulation 440 V a.c. (unvented version). ■ Vented version certified as per EN 12492:2012. Unvented version provides protection in conformity of EN12492: 2012 except clause 4.1.4.

Pack quantity

Min. order quantity

Description

Article Number

EAN Code

4932493350

BOLT ™ Low-Profile Headlamp Mount

4058546482213 <price

<price

BOLT ™ Sunshade

Pack quantity

Min. order quantity

Description

Article Number

EAN Code

■ UV protection with 50+ UPF fabric, blocking blocking 97,5 – 98+ % of the harmful UV rays. ■ BOLT ™ system – ensure compatibility between the accessorize with an easy and intuitive attachment system. ■ Dedicated ear-muff slots for full accessories compatibility.

4932478141 4932478918 4932478919 4932478920 4932480651 4932480652 4932480653 4932480654

BOLT ™ 200 White Vented - 1pc BOLT ™ 200 Yellow Vented - 1pc BOLT ™ 200 Red Vented - 1pc BOLT ™ 200 Black Vented - 1pc BOLT ™ 200 Blue Vented - 1pc BOLT ™ 200 Green Vented - 1pc BOLT ™ 200 Orange Vented - 1pc BOLT ™ 200 Hi-Vis Vented - 1pc

1 1 1 1 1 1 1 1

4058546340742 <price 4058546362003 <price 4058546362010 <price 4058546362027 <price 4058546409364 <price 4058546409371 <price 4058546409388 <price 4058546409395 <price

<price <price <price <price <price <price <price <price

■ Moisture wicking textile dry fast from sweat and permits to stay cool. ■ Compatible with Milwaukee BOLT ™ 100 and BOLT ™ 200 helmets. ■ Conforms to EN 13758-2.

Pack quantity

Min. order quantity

Description

Article Number

EAN Code

4932492101

BOLT ™ Sunshade

4058546414689 <price

<price

Pack quantity

Min. order quantity

Description

Article Number

EAN Code

4932479252 4932479253 4932479254 4932479255 4932480655 4932480656 4932480657 4932480658

BOLT ™ 200 White Unvented - 1pc BOLT ™ 200 Yellow Unvented - 1pc BOLT ™ 200 Red Unvented - 1pc BOLT ™ 200 Black Unvented - 1pc BOLT ™ 200 Blue Unvented - 1pc BOLT ™ 200 Green Unvented - 1pc BOLT ™ 200 Orange Unvented - 1pc BOLT ™ 200 Hi-Vis Yellow Unvented - 1pc

1 1 1 1 1 1 1 1

4058546370466 <price 4058546370473 <price 4058546370480 <price 4058546370497 <price 4058546409401 <price 4058546409418 <price 4058546409425 <price 4058546409432 <price

<price <price <price <price <price <price <price <price

BOLT ™ Face Shield

■ Full face shield with panoramic field of vision. ■ BOLT ™ system – ensure compatibility among a large range of accessories with an easy and intuitive attachment system. ■ Compatible with the BOLT ™ Lamp: possibility to lift the face shield even with the lamp installed. ■ Extremely easy and intuitive installation and removal. ■ Lens made of polycarbonate.



■ Lens certified anti-scratch K as per EN166. ■ Lens certified anti-fog N as per EN166. ■ 2 lens tints available: clear and grey.

■ The Compact version offers a slim and compact design and is only compatible with BOLT ™ 200. ■ The Universal version can be adapted on both BOLT ™ 100 and BOLT ™ 200 helmets thanks to an easy switch system. ■ Faceshield certified as per EN 166. Mesh faceshield certified as per EN 1731.

BOLT ™ Earmuff

■ BOLT ™ LP Earmuff provides an efficient job site noise attenuation SNR = 30 dB. ■ BOLT ™ HP Earmuffs provides an efficient job site noise attenuation SNR = 33 dB. ■ BOLT ™ system – ensure compatibility between the accessorize with an easy and intuitive attachment system. ■ Vertical adjustment and 360 degrees cup rotation for users’ maximum comfort and attenuation. ■ Extra comfortable foam in the earmuff's cushions for maximum comfort and protection. ■ Compatible with Milwaukee BOLT ™ 100 and BOLT ™ 200 helmets in the rear and middle slot. ■ European Certified hearing protectors: EN 352-3.

Pack quantity

Min. order quantity

Description

Article Number

EAN Code

4932479943 4932479944 4932479945 4932479938 4932479939 4932479940 4932492327 4932492328 4932492329 4932492324 4932492325 4932492326

a BOLT ™ Face Shield Compact Clear b BOLT ™ Face Shield Compact Grey c BOLT ™ Mesh Face Shield Compact BOLT ™ Face Shield Universal Clear BOLT ™ Face Shield Universal Grey BOLT ™ Mesh Face Shield Universal

1 1 1 1 1 1 5 5 1 5 5 1

1 1 1 1 1 1 1 1 1 1 1 1

4058546377373 <price 4058546377380 <price 4058546377397 <price 4058546377328 <price 4058546377335 <price 4058546377342 <price 4058546416942 <price 4058546416959 <price 4058546416966 <price 4058546416911 <price 4058546416928 <price 4058546416935 <price

<price <price <price <price <price <price <price <price <price <price <price <price

Pack quantity

Min. order quantity

Description

Article Number

EAN Code

BOLT ™ Face Shield Compact Clear Replacement (5 pc) BOLT ™ Face Shield Compact Grey Replacement (5 pc) BOLT ™ Face Shield Compact Carrier Replacement BOLT ™ Face Shield Universal Clear Replacement BOLT ™ Face Shield Universal Grey Replacement BOLT ™ Face Shield Universal Carrier Replacement

4932478877 4932478878

BOLT ™ HP Ear Muffs BOLT ™ LP Ear Muffs

1 1

4058546361594 <price 4058546361600 <price

<price <price

milwaukeetool.eu

BOLT ™ IMPACT ARMOR ™ Crown Liner BOLT ™ 200

BOLT ™ Visor

NEW

■ Visor with panoramic field of vision. ■ BOLT ™ system – ensure compatibility among a large range of accessories with an easy and intuitive attachment system. ■ Compatible with the BOLT ™ Lamp: possibility to lift the visor even with the lamp installed. ■ Extremely easy and intuitive installation and removal. ■ Lens made of polycarbonate.



■ Advanced slip, trip & fall protection for MILWAUKEE ® safety helmet.

Pack quantity

Min. order quantity

Description

Article Number

EAN Code

4932499173

BOLT ™ IMPACT ARMOR ™ Crown Liner BOLT ™ 200

4058546563370 <price

<price

■ Lens certified anti-scratch K as per EN166. ■ Lens certified anti-fog N as per EN166. ■ 2 lens tints available: clear and tinted.

BOLT ™ 200 Spare Parts

■ Padded breathable Crown liner and Sweatband as spare parts, that can be easily removed, machine washed (30˚C), and changed. ■ Two chin straps that can be easy exchange and replace to adapt to the job conditions. EN397 certified chin strap for on the ground work is colour coded in Black & Grey. EN12492 certified chin strap for work at height is colour coded in Black & Red.

Pack quantity

Min. order quantity

Description

Article Number

EAN Code

4932479946 4932479947 4932479941 4932479942 4932492330 4932492331 4932492333 4932492332

a BOLT ™ Visor Compact Clear b BOLT ™ Visor Compact Tinted BOLT ™ Visor Universal Clear BOLT ™ Visor Universal Tinted

1 1 1 1 5 5 1 1

1 1 1 1 1 1 1 1

4058546377403 <price 4058546377410 <price 4058546377359 <price 4058546377366 <price 4058546416973 <price 4058546416980 <price 4058546417000 <price 4058546416997 <price

<price <price <price <price <price <price <price <price

Pack quantity

Min. order quantity

Description

Article Number

EAN Code

4932480659 4932480660 4932480661 4932480662

Replacement Sweatband BOLT ™ 200 - Pack of 10 Replacement Crown liner BOLT ™ 200 - Pack of 10

10 10

1 1 1 1

4058546409449 <price 4058546409456 <price 4058546409463 <price 4058546409470 <price

<price <price <price <price

BOLT ™ Visor Clear Lens Replacement (5 pc) BOLT ™ Visor Tinted Lens Replacement (5pc) BOLT ™ Visor Compact Carrier Replacement BOLT ™ Visor Universal Carrier Replacement

4pts EN397 chinstrap BOLT ™ - 1pc

1 1

4pts EN12492 chinstrap BOLT ™ 200 - 1pc

Premium safety glasses with gasket

BOLT ™ Badge Holder

COMFORTABLE, FLEXIBLE ARMS FOR EXTENDED WEAR

■ BOLT Badge holder allows everyday identification on the job site. Business card or ID size of 85 mm x 54 mm. ■ Compatible with MILWAUKEE ® BOLT ™ 100 and BOLT ™ 200 helmets in the front and back slot. ■ Compatible with BOLT ™ visors, face shield, earmuffs, sunshade. ■ BOLT ™ system – ensure compatibility between the accessories with an easy and intuitive attachment system. ■ Made of polycarbonate for extended durability in job site conditions. ■ IP54 rated to protect from rain and dust.

ANTI-SCRATCH LENSES



Pack quantity

Min. order quantity

Description

Article Number

EAN Code

4932493510

BOLT ™ Badge Holder -1pc

4058546483814 <price

<price

LONG LASTING ANTI-FOG LENSES

BOLT ™ Cooling Accessories

NEW

REMOVABLE GASKET PROTECTS AGAINST DEBRIS

■ Long lasting cooling effect up to 4 hours, prolonging productive work hours and mitigating heat related illnesses. ■ Soak or run product under water and wring out excess water to activate cooling effect. ■ Quick, 30 second activation time. ■ When cooling effect expires, simply re-apply water to reactivate the cooling effect. ■ Soft, Comfortable Padding. ■ Attaches to Suspension with Hook and Loop. ■ Machine washable.



FLEXIBLE NOSE PIECE

ALSO AVAILABLE IN TINTED LENSES FOR OUTDOOR WORK



Pack quantity

Min. order quantity

INCLUDES A SOFT CASE

Description

Article Number

EAN Code

4932498078 4932498079 4932498544

BOLT ™ 200 Cooling Sweatband BOLT ™ 200 Cooling Crown Liner BOLT ™ 100 Cooling Sweatband

1 1 1

4058546512385 <price 4058546512392 <price 4058546524135 <price

<price <price <price

a b c

Pack quantity

Min. order quantity

Article Number

Lens colour

Packaging style

EAN Code

4932471885 4058546297848 <price 4932471886 4058546297855 <price

Clear

Blister packaging Blister packaging

1 1

<price <price

a b

Polarised

milwaukeetool.eu

Performance safety glasses

Enhanced safety glasses



NEW

■ Light weight for extended comfort while wearing. ■ Durable anti-scratch lenses. ■ Long lasting anti-fog lenses. ■ Comfortable and flexible arms for extended comfort wear. ■ Clear and tinted options offer eye protection whether working indoors or outdoors. ■ European Certified: EN166 and EN170 / EN172.

■ Durable anti-scratch lenses. ■ Long lasting anti-fog lenses. ■ Comfortable and flexible arms for extended comfort wear. ■ Clear and tinted options offer eye protection whether working indoors or outdoors. ■ European Certified: EN166 and EN170 / EN172.

Pack quantity

Min. order quantity

Lens colour

Packaging style

Article Number

EAN Code

4932478763 4932479024 4932478764 4932479025 4932478907 4932479026 4932478927

Polybag

1 1 1 1 1 1 1

4058546360450 <price 4058546363147 <price 4058546360467 <price 4058546363154 <price 4058546361891 <price 4058546363161 <price 4058546362096 <price

<price <price <price <price <price <price <price

Clear

Bulk Pack (144pcs)

144

Lens colour

Packaging style

Pack quantity Min. order quantity Article Number

EAN Code

Polybag

Tinted

Bulk Pack (144pcs)

144

4932471883 4932479027 4932471884 4932479028 4932478908 4932479029 4932478928 4932498367 4932498366

Blister packaging Bulk Pack (48pcs) Blister packaging Bulk Pack (48pcs) Blister packaging Bulk Pack (48pcs) Blister packaging

1 1 1 1 1 1 1 1 1

4058546297824 4058546363178 4058546297831 4058546363185 4058546361907 4058546363192 4058546362102 4058546522360 4058546522353

<price <price <price <price <price <price <price <price <price

Clear

Polybag

Grey

Bulk Pack (144pcs)

144

Tinted

Yellow

Polybag

Grey

Yellow

1 1 1

d e f

Magnified safety glasses

Photochromic Mirrored Silver

Gift box Gift box

Safety glasses



■ Magnified lenses - Offer users an optical correction to improve their eyesight for close application. ■ 4 magnifying intensity: +1 / +1.5 / +2 / +2.5 ■ Light weight for extended comfort while wearing. ■ Durable anti-scratch lenses. ■ Comfortable and flexible arms for extended comfort wear. ■ European Certified: EN166.

■ Light weight for extended comfort while wearing. ■ Fully adjustable and removable nose bridge to fit comfortably all face shapes. ■ Comfortable and flexible arms for extended comfort wear. ■ Clear and tinted options offer eye protection whether working indoors or outdoors. ■ European Certified: EN166 and EN170 / EN172.

Pack quantity

Min. order quantity

Description

Article number

EAN Code

4932478909 4932478910 4932478911 4932478912

Clear Safety Glasses (+1)

1 1 1 1

4058546361914 <price 4058546361921 <price 4058546361938 <price 4058546361945 <price

<price <price <price <price

Clear Safety Glasses (+1.5)

Lens colour

Packaging style

Pack quantity Min. order quantity Article Number

EAN Code

Clear Safety Glasses (+2)

4932471881 4932471882

Clear

Polybag Polybag

1 1

12 12

4058546297800 4058546297817

<price <price

a b

Clear Safety Glasses (+2.5)

Tinted

High-Profile Goggles Non-Vented

NEW

Hard Case For Safety Glasses

■ Durable anti-scratch lenses ■ Long lasting anti-fog lenses ■ Enhanced impact protection ■ Protection against splashes and liquids ■ Non-vented, for work with gases and vapors ■ European Certified: EN166 and EN170 / EN172



■ Hard case to protect the safety glasses of job site conditions. ■ Soft terry liner inside to avoid scratches on the lenses. ■ Include hook for easy portability on the job site. ■ Compatible with Milwaukee safety glasses: Enhanced Safety Glasses, Magnified Safety Glasses, Performance Safety Glasses, Premium Safety Glasses with Gasket.

Main_ Price_ Type <price

Pack quantity

Min. order quantity

Price ex. VAT

Price Inc. VAT

Pack quantity

Min. order quantity

Description

Article Number

EAN Code

Description

Article Number

EAN Code

4932492083

Hard Case Safety Glasses

4058546414504 <price

<price

4932493438 4932493437

a High-Profile Goggles Non-Vented Grey b High-Profile Goggles Non-Vented Clear

1 1

4058546483098 <price 4058546483081 <price

<price <price

Page 1 Page 2-3 Page 4-5 Page 6-7 Page 8-9 Page 10-11 Page 12-13 Page 14-15 Page 16-17 Page 18-19 Page 20-21 Page 22-23 Page 24-25 Page 26-27 Page 28-29 Page 30-31 Page 32-33 Page 34-35 Page 36-37 Page 38-39 Page 40-41 Page 42-43 Page 44-45 Page 46-47 Page 48-49 Page 50-51 Page 52-53 Page 54-55 Page 56-57 Page 58-59 Page 60-61 Page 62-63 Page 64-65 Page 66-67 Page 68-69 Page 70-71 Page 72-73 Page 74-75 Page 76-77 Page 78-79 Page 80-81 Page 82-83 Page 84

Made with FlippingBook Annual report