Welding Magnetic Switchable Welding Aids
Quick Holding Clamp Switchable
• Features ON/OFF switches • The fast & easy way to hold metal workpieces at 45°, 90° • Turn the magnet OFF or at the midpoint position when setting up, turn ON when you’re ready to work • Fast and safe set-up! • Ideal for round and square tubing, angle, and flat stock • Simple wipe clean design
Pull Force* kg
Product Number
Dimensions mm 111 x 95 x 29 152 x 130 x 35
Weight kg
Angles
QHCSS QHCSL
45°, 90° 45°, 90°
0.7 1.4
40 75
* Magnetic force is based on the longest side of magnet with 10mm thick steel.
Made with strong rare earth magnets. Fully enclosed for easier cleaning.
DOUBLE Plate Optimize magnetic force (-HD models)
The ON/OFF switch Mid point switch position: for alignment / easy part placement.
NOTE: Must be used for tack welding only and removed before completing weld. Avoid prolonged exposure of magnetic products to heat sources of 356ºF / 180º
62
Eclipse Magnetics Work Smart with Magnets
Made with FlippingBook Digital Proposal Creator