Workholding
Chuck Blocks
• Use to extend the flux paths of a magnetic chuck with parallel poles • Can be machined to accommodate awkward workpieces
Pole Direction kg
Product Number
Length mm
Height mm
Width mm
Weight kg
950
60 50
30 40
75 Longitudinal* 100 Longitudinal*
2.4 2.4
950v
*Along width
Simple Magnetic Sine Tables Short Lift
• Accuracy of sine table within (+/- 5 secs of arc) • Pole spacing 2mm (1.5mm Steel 0.5mm Brass) • Clamping force 80N/cm 2
Top Plate mm
Base mm
Height At Zero mm
Product Number SSTFP1018 SSTFP1325 SSTFP1535
Weight kg
Chuck
Length Width Length Width
ERFP1018 ERFP1325 ERFP1535
180 255 350
100 215
115
73 78 89
12 24 39
130 295 195 150 390 165
'V' Blocks
• 'V' blocks are ideal for holding cylindrical and complex workpieces for marking, spark erosion, grinding and measurement operations • Can be used on its bottom, top or back
Please note: the actual performance is always application specific. The below values were derived from testing on very thick mild steel flat plate. The pull force achieved in an application may be lower as it is affected by things such as the size, shape and thickness of the material, the material type being used, and the temperature of the application.
Max pull force bottom face (kg)
Max diameter of workpiece
Max pull force back face (kg)
Max pull force top face (kg)
Weight kg
Product Number
Width mm
Length mm
Height mm
Top 'V' mm
Bottom 'V' mm
25 Micron Accuracy - flatness / parallelism (top and bottom faces) E934 70 101.6 95 65
22 22 22 22 22 22 22 22
4.5
180 180 140 140
150 150 120 120
110 110
E934MP (sold in pairs)
70 70 70
101.6
95 95 95
65 65 65
9 3 6
E935
80 80
90 90
E935MP (sold in pairs)
10 Micron Accuracy - flatness / parallelism (top and bottom faces) E933A 70 120 95 65
4.5
90 90 60 60
90 90 60 60
45 45 30 30
E933MPA (sold in pairs)
70 70 70
120
95 95 95
65 65 65
9
E935A
80 80
3.5
E935MPA (sold in pairs)
7
Eclipse Magnetics Work Smart with Magnets
73
Made with FlippingBook Digital Proposal Creator