R ope F ixtures Starrett rope fixtures are used for testing rope, cable, filament, yarns, etc. These fixtures are used for tensile applications. Features include a guide roller that helps prevent breakage within the test fixture. O peration Rope fixtures feature a design that helps ensure proper sample alignment and that promotes a correct sample break between the upper and lower test fixture. These fixtures feature a spool used to wrap the sample, The sample is typically wrapped around the spool 1-1/2 or 2 times depending on the strength of the material. These rope fixtures let you position your material under test around a cylindrical spool so that force is applied directly in line with the load cell sensor. T esting S tandards There are a variety of testing standards for rope, filament, cords, fine wires and cables. Contact your Starrett representative for more information about your specific testing method and the available test fixtures.
Rope Fixtures
Load Capacity
Model No.
N
KGF 100 100 500 500
LBF 225 225
Jaw Face Type
Roller Diameter
Sample Diameter
ROPE-76-1A-1 ROPE-76-1A-D ROPE-76-5A-1 ROPE-76-5A-D ROPE-255-10-PY ROPE-255-10-D ROPE-76-20S-1 ROPE-170-50
1,000 1,000 5,000 5,000
Rubber
20 mm ø 20 mm ø 40 mm ø 40 mm ø 26 mm ø 26 mm ø 94 mm ø 162 mm ø
2 mm ø 2 mm ø 5mm ø 5mm ø 5mm ø 5mm ø 9 mm ø 20 mm ø
Diamond Serrated Diamond Serrated Diamond Serrated Serrated
1,100 1,100 2,200 2,200 4,500
10K 10K 20K 50K
1,000 1,000 2,000 5,000
11,000
100
Made with FlippingBook - professional solution for displaying marketing and sales documents online