The DFG is Starrett's basic force gage. The gage measures force at an accuracy of better than 0.2% full scale.
L1 F orce M easurement DFG DIGITAL FORCE GAGE
Force Measurement Solutions
The DFG is our basic force gage. The gage measures force at an accuracy of better than 0.2% full scale. Additionally, the DFG Scan be used to measure force with Starrett FMM digital force tester or MTL lever-actuated manual force tester or an MTH hand¬wheel-operated manual force tester. Unlike the Starrett DFC Force Controller, the DFG cannot be used to control the FMM digital force tester. SIMPLE, EASY-TO-USE BASIC FORCE MEASUREMENT The DFG is ideal for basic tensile and compression testing. Test setup and operation is fast, efficient and easy for anyone. The DFG can be used for load limit testing, peak load testing, and break testing. The DFG display shows the test direction and dynamic load during testing. Results are displayed at the completion of testing, including "Pass-Fail" when tolerance is applied. The gage will display statistics when results are saved to the gage’s internal memory. Store up to 50 test results in local memory. You can also export results and raw data via USB communications to a network device. Internal data sampling at 10kHz helps capture peak events. FORCE MEASUREMENT ACCURACY AND REPEATABILITY The DFG ensures a repeatable measurement using ozf, gf, kgf, lbf or N units with an accuracy of better than 0.2% FS. The load cell sensor can be adjusted so that your gage can limit the full scale measurement capability helping to protect from accidental overloading. The safe overload rating is 200% FS. The integral load cell sensor complies with IEEE 1451-4.
Shown: Starrett DFG force gage
ORDERING Model
ozf
lbf
gf
kgf
N
FS Deflection (mm) Thread Size
Accessory Kit
DFG-10 DFG-20 DFG-50 DFG-100 DFG-200 DFG-500
160 x 0.05 320 x 0.05 800 x 0.2 1600 x 0.5
10 x 0.02 20 x 0.05 50 x 0.01 100 x 0.2 200 x 0.5 500 x 0.1
5000 x 1
5 x 0.001 10 x 0.02 25 x 0.05 50 x 0.01 100 x 0.2 250 x 0.05
50 x 0.01 100 x 0.2 250 x 0.05 500 x 0.1 1000 x 0.2 2500 x 0.5
0.15
M6 x 1-6g M6 x 1-6g M6 x 1-6g M6 x 1-6g M6 x 1-6g
SPK-FG-S SPK-FG-S SPK-FG-S SPK-FG-S SPK-FG-M SPK-FG-L
10,000 x 2 25,000 x 5 50,000 x 10
0.2
0.39
0.6
- -
- -
0.54
0.7
M10 x 1.5-6g
Note: Display resolution is 5000:1
Bulletin 1820
starrett .com
L1 F orce M easurement DFG DIGITAL FORCE GAGE
Force Measurement Solutions
1.63 (41.3) 0.50 (12.7)
3.30 (83.8)
0.91 (23.0)
2.00 (50.8)
Thread
A
0.55 (14.0)
2.00 (50.8)
M4x0.7 - 6H 0.30
7.50 (190.5)
Ø0.20 0.18
A
2.25 (57.2)
1.70 (43.2)
Starrett Digital Force Gages Specification Accuracy, Full Scale Data Sampling (Hz) Display Resolution Maximum Tare Communications USB 2.0 Safe Overload, Full Scale
DFG Series
0.20% 10,000 5,000:1
200%
10%
Yes Yes
RS-232
I/O Digital, Configurable
2 channels
Memory, maximum results saved
Yes
Operating Mode Real Time Peak Compression
Yes Yes Yes Yes
Peak Tension Load Limit
Power, Environmental Battery Type
Lithium Ion >30 hours <3 hours
Battery Life, typical @ 20% brightness Charge Time, using 110/240V Mains
Display
OLED High Resolution
Operating Temperature Thread, for adapters Instrument Weight (approx.)
40°F to 110°F (4°C to 43°C)
Metric M6, M10 3 lbs (1.36 kgs)
Bulletin 1820
12/17 1.5M/Q specifications subject to change.
starrett .com
Page 1 Page 2Made with FlippingBook - professional solution for displaying marketing and sales documents online