S pecifications D igital F orce T esters
FMM - Digital Force Testers Models
Standard Travel
Extended Travel
FMM-110
FMM-330
FMM-550
FMM-110X
FMM-330X
FMM-550X
Lbf
110 500
330
550
110 500
330
550
Load Capacity, Full Scale
N
1500
2500
1500
2500
Kgf
50
150
250
50
150
250
inch/min mm/min inch/min mm/min inch/min mm/min
0.002
Crosshead Speed, Minimum
0.05
40
Crosshead Speed, Maximum
1000
40
Maximum Speed, Full Load
1000
Accuracy- Speed
Better than 0.1% of test speed
inch mm inch mm
Accuracy- Crosshead Position
±0.001in (20μm) Or 0.1% of displacement whichever is greater
0.001 0.025
Travel Resolution
lbf/in
13,750
17,368
17,742
12,222
13,750
14,865
Axial Frame Stiffness
kN/mm Counts Duration Duration
2.5
3.1
3.1
2.2
2.5
2.5
99,999
Cycling, Maximum
27 hours 27 hours
Constant Hold, Maximum
inch mm inch mm
22
32
Vertical Test Space 1
559
813
20
30
Crosshead Travel
508
762
Communication
USB 2.0, RS-232,
Input/Output Channels
0 - 24Vdc (independent, configurable)
Power
Single Phase Voltage (Vac) +10% 110, 120, 220, 230, 240 50/60 Hz
0.09A Holding 0.11A Holding 0.18A Holding 0.09A Holding 0.11A Holding 0.18A Holding 10.5 Watts 12,9 Watts 21.1 Watts 10.5 Watts 12,9 Watts 21.1 Watts
Using 117V Mains at Full Scale Load
°F °C
+40 to +110
Operating Temperature
+5 to +43
Humidity
10 to 90%, non-condensing
inch mm inch mm inch mm inch mm inch mm
3.9 100
Throat
37
47
Height
940 11.5 292 16.5 419
1194
Width
Depth
#10-32, 5/16-18, 1/4-28, 1/2-20 (optional)
Base Plate Threads
M4, M6, M10, M12 (standard)
lbs
80
95 43
Weight (approx.)
kgs
36.3
CE Compliance
Meets all relevant CE standards for safety, immunity, noise
NOTES Total vertical space is the distance from the top surface of the base plate to the bottom surface of the crosshead.
The standard base plate features four hole patterns for mounting fixtures; M4, M6, M10 and M12. An optional imperial base plate features #10-32, 5/16-18, 1/4-28, and 1/2-20. The base plate can be easily positioned to ensure correct sample alignment.
Two mounting blocks are available for attaching a Starrett force gage or the BLC Load Cell. The blocks attach easily and securely to the crosshead and ensure correct center line alignment.
A stainless steel clevis set is included with the FMM test frame base. The clevis will accept 15.9mm diameter test fixtures. The clevis set includes the clevis, locking rings, grip pin and a spanner wrench.
10
Made with FlippingBook - professional solution for displaying marketing and sales documents online