33 D
POSI LOCK ® PULLERS
PIPE STRETCHER KIT
FREE FENDER COVER
• Small Expander: 1-1/8” to 1-3/4” • Medium Expander: 1-1/2” to 2-1/2” • Large Expander: 2-1/8” to 3-1/2” • (3) Spare sets of rubber O-rings EXHAUST PIPE CUTTER PLIERS 3 PC. TAILPIPE EXPANDER SET Collet sets expand pipes from 1-5/8” to 4-1/4”. A convenient, inexpensive alternative to hydraulic pipe expanders. Comes in a molded storage case. Expands all types of exhaust pipe, including stainless steel, from 1-5/8” to 4-1/4” in size. LIS-17350...................... $291.59
Model
Capacity 2 Tons 5 Tons 10 Tons 17 Tons 20 Tons
Reach
Spread
Price
MTI-103 MTI-104 MTI-106 MTI-108 MTI-110
$136.59 $210.59 $277.89 $353.79 $389.95
$35.00 VALUE LIS-89880
3” 4” 6” 8”
.25 to 4.5”
.5 to 5” .5 to 7”
.75 to 12” 1” to 15”
9.67”
www.posilock.com
$63.29 ATD-5723
HARMONIC BALANCER INSTALLER KIT
Set includes driving screw, thrust bearing and 13 threaded adapters necessary to work on a wide range of domestic and some import harmonic balancers. Five long adapters for use on Dodge Hemi, generation III and IV GM motors, some Chrysler and some Ford including 3.5L and 4.0L. The 1.75” spacer allows the tool to work more harmonic balancers.
• Cuts pipe from 3/4” to 3-1/4” (19mm to 83mm) in diameter • Warranty does not cover normal dulling of cutting wheels from repeated use - replacement cutting chain PRT5721-01 available for purchase ATD-5721................................ $44.59
LIS-53790................................ $214.39
LATE MODEL HARMONIC DAMPENER PULLER & HOLDING TOOL SET • Remove dampener pulleys on late model vehicles without removing the radiator • Use on the following: • 1995+ Ford V8 • 2000+ GM 4.8L, 5.3L, 6.0L & 8.1L V8 • 1997+ GM 5.7l V8 • 1988+ Cadillac 4.5L, 4.6L & 4.9L V8 • 2004+ GM 3.5L I5 • 2005+ GM 2.8L I4 • 1995+ Olds 4.0L V8 • 1990+ Chrysler 2.0L & 2.4L I4 • 2003+ GM 4.2L I6 • 1995+ Mitsubishi 2.0L • 1990+ Chrysler 2.5L, 2.7L, 3.3L, 3.5L and 3.8L V6 HARMONIC BALANCER PULLER SET This kit includes a standard harmonic balancer puller, pulling screws, adapters for 3300 and 3800 GM V6 engines, and a harmonic damper pulley puller for Chrysler, GM, Mitsubishi and Dodge. Includes new interchangeable puller jaws for 3.6L V6 Chevy Camaro and Dodge 5.7L Hemi. ATD-3039................................. $147.29
NO SLIP PULLEY PULLER AND INSTALLER SET • Removes and installs pressed on power steering, alternator and air pump pulleys without slipping • Fits most domestic models including GM 3.1 and Quad 4 engines • Works on traditional V shaped pulleys and serpentine belt system pulley
LIS-39000.................................. $80.59
ALTERNATOR/POWER STEERING PULLEY PULLER & INSTALLER
• Removes pressed-on alternator and power steering pulleys on late model GM (including Quad 4), Ford and Chrysler engines as well as some AMC vehicles
• Reverse the jaws to pull the alternator internal bearing • Will not work on 3.3L and 3.5L Chrysler engines
ATD-3052................................ $63.19
• 8 function internal or external 3-jaw puller • 5 lbs. heavy-duty hammer • Internal or external 2-jaw puller • Puller hook, rear axle puller SLIDE HAMMER PULLER SET
• Jaws are reversible to make four other pullers • 8-way, 2- or 3-jaw reversible pullers • Ideal for pulling smaller gears, bearings, pulleys and other press fit parts REVERSIBLE JAW PULLER ATD-3041................................... $44.99 • Heavy-duty, flange-type puller easily pulls harmonic balancers, timing gears and other parts with bolt circle diameters from 1-1/2” to 4-5/8” • Works on most cars - large and small, foreign and domestic • Will pull parts with tapped holes like flywheels, gears and pulleys HARMONIC BALANCER PULLER SET LIS-54810................................ $257.29
$139.39 ATD-3045
• Special grip wrench adapter • 5/8”x 18 threaded end
LIS-39480
LIS-37160
LIS-39200
LIS-35070
LIS-35800
Number
Description
Max Reach
Max Spread
Max Screw Size
Price
ATD-3044
$70.29
5 Ton, 2/3-Jaw Reversible Puller
5-1/2”
7”
9/16” -20 x 6-15/16”
LIS-37450
5 TON STRAIGHT PULLER • Includes: 9” bar and (3) pairs of puller arms ATD-3047. .................. $60.29 10 TON STRAIGHT PULLER • Includes: 10” bar and (4) pairs of puller arms ATD-3048. ................ $199.49 • More convenient than standard pullers • Versatile and easy to use • Puller arms slide back and forth on yoke to adjust
ATD-3399
CAL-68800
ATD-3310
LIS-39850
FUEL LINE, A/C & AIR LINE DISCONNECT TOOLS & SETS Number Description/Contents
5 TON BAR-TYPE PULLER / BEARING SEPARATOR SET • 2” and 3” bearing separators • (4) sets hex push-puller legs • 5” puller cross bar with 6-1/4” forcing screw ATD-3056. ............. $112.59
Price
Master Disconnect Set - Clutch coupling remover for Ford; low profile 3/8” Jiffy-tite ® disc.; low profile 1/2” Jiffy-tite ® disc.; low profile fuel line disc. set; A/C fuel line disc. set; fuel & A/C disconnect pliers; fuel module disc. tool for GM; fuel line retaining clip tool set; main fuel line disc. for Toyota & Nissan; angled disc. set; trans. oil cooler line scissors 3/8” x 1/2”; hydraulic clutch line disc. for GM; coupler disc. for Chrysler; oil cooler line disc. for Ford; fuel line disc. for Ford; 5/16” x 3/8” scissor disc.; coupler disconnect; molded case. 15 Pc. Deluxe Disconnect Tool Set - Set includes tools for use on 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4” and 7/8”: fuel lines and fil- ter; fuel pressure regulators; fuel return lines; A/C fittings; oil cooler lines; radiator cooler lines; trans. oil cooler lines & vehicle specific applications.
LIS-39850
$197.29
ATD-3399
$51.59
RATCHETING HARMONIC BALANCER PULLER Features:
LIS-37000 LIS-37160 LIS-37450 LIS-35800
$9.39
6 Pc. A/C Fuel Line Disconnect Set - 5/16”, 3/8”, 1/2”, 5/8”, 3/4” and 7/8”
• Eliminates the need to remove major engine components • Ratcheting function holds jaws in place during application • Ratcheting yoke has a 7-Ton pulling capacity Applications: • FORD – 4.6L, 5.0 Coyote, and 5.4L • GM – 5.3L, 5.7 (LS1), 6.0 (LS2), 6.2 (LS3) and 7.0 • MISC – Most 3 and 6 spoke harmonic balancers/pulleys
$23.99 $18.69 $89.99
Disconnect Pliers - Low profile with 85˚ bend. Works on Delphi two tab connectors and some import vehicles
DEF Disconnect Set - Easy access to DEF fill & breather lines on 2012 and newer Ford Power Stroke & Dodge diesel
$95.99 ATD-3075
6 Pc. Aluminum Disconnect Set - Disconnects work on air conditioning lines and quick connect fuel lines
13 Pc. Aluminum Spring Disconnect Set - Spring-loaded construction allows one-handed access to hard-to-reach, confined, and obstructed areas. Tools are marked for easy identification. Blow-molded case for storage.
LIS-39480
$139.99
Made with FlippingBook flipbook maker