34 D
FLYWHEEL LOCKING TOOL FOR 6.6L DURAMAX Works on 6.6L Duramax engines with Allison automatic transmissions
FLARE NUT SOCKET SET, 10 PC.
SHOCKIT™ SOCKET DIESEL NOX & PARTICULATE SENSOR REMOVAL KIT
SHOCKIT O2 SENSOR REMOVAL KIT
LIS-22100.................$47.19
• For Ford power stroke and International/Navistar • Low-profile design for easy access in tight quarters FORD DIESEL FUEL FILTER WRENCH ATD-5405. ................$15.79
Air Hammer Powered. Access, loosen, and easily remove frozen and obstructed 22mm O2 sensors and diesel NOx sensors. Hypersonic vibration eliminates thread galling. Includes 18mm dual sided tap/bottoming die for O2 sensor and mounting hole threads. Dual ear socket with 8mm index holes for 90° rotation without repositioning socket. 8mm indexed holes on drivers designed to work with included 8mm radius tip Shockit Punch.
$169.49 LIS-12030
Holds the timing chain and gear in place while removing or installing water pump on Ecotec engines. WATER PUMP SPROCKET HOLDER - ECOTEC
Remove even the most stubborn diesel exhaust sensors with the Shockit™ Socket Diesel NOx and Particulate Sensor Removal Kit. This kit utilizes the force and vibra- tion of an air hammer to loosen the most rusted sensors.
Works on ABS, master cylinder, coolant, and diesel injection sensors. 3/8” square drive with chrome finish. Set includes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and 19mm.
LIS-13800.................$40.29
LOC-LT996D................ $349.95 LOC-LT994.................. $172.95
IPR SOCKET FOR FORD 6.0L AND INTERNATIONAL DIESEL
VARIABLE PIN SPANNER WRENCH
• 6 and 12 point with flex head • Works on all oxygen sensors with 7/8” hex • 9” handle length OXYGEN SENSOR WRENCH
Slot in tool has been modified to fit larger connectors on injector pressure regulators found on International diesels. The tool is built to bottom out on the regulator hex so it does not put torque on the connector in case the regulator can be reused. Use with 3/8” square drive .
6 pt.
• Adjusts from 1-1/4” to 5”; use with 1/2” dr. ratchet or breaker bar • Accommodates the most common metric size pin configurations including: 3.5mm, 4mm, 4.5mm, 5mm, 6mm, 7mm and 10mm ATD-8614. .................... $98.49
LIS-68210.................$29.19
12 pt.
ATD-5665. .................... $39.29
Includes 1 each: • 1/2” Dr. 29mm x 90mm Oxygen Sensor Socket • 3/8” Dr. 7/8” x 90mm Oxygen Sensor Socket • 1/2” Dr. 27mm x 79mm Fuel Injector Socket • 3/8” Dr. 7/8” x 80mm Vacuum Switch Socket • 2-1/8” Offset Oxygen Sensor Wrench • Oxygen Sensor Thread Chaser • 1/2” Dr. 7/8” x 50mm Oxygen Sensor Socket • 3/8” Dr. 7/8” x 30mm Offset Oxygen Sensor Wrench • 1/2” Dr. 22mm Special Tube Socket • 3/8” Dr. 1-1/16” x 74mm Oil Sending Unit Socket • 1/2” Dr. Deep Oxygen Sensor Socket 11-PC. OXYGEN SENSOR AND SENDING UNIT SOCKET SET
19MM HARMONIC BALANCER SOCKET FOR HONDA Use on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications. 1/2” drive. LIS-77080.............. $34.29
11 PC. GASKET HOLE PUNCH SET • Designed to cut holes and internal radii in gaskets and other soft material (i.e., rubber, lead foil, linoleum, felt fiber) • (10) punch sizes: 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 3/4”, 7/8”, 1”, and long driving mandrel
KAS-950................ $51.49
FUEL TANK LOCK RING KIT Channel design on body allows 2 interchangeable sets of legs to adjust to fit rings from 4” to 7-1/4” and keeps the drive centered. Works on many 2004 and newer vehicles including Ford F150, Chevy pickups, Chrysler/Dodge mini vans, PT Cruiser, Dakota and Durango
VENT CAP WRENCH FOR DAVCO
Double-ended wrench removes vent cap on top of Davco chassis mounted fuel filter system canisters LIS-61070.................$13.99
ATD-5666. ................... $107.29
LIS-62970.............. $66.89
UNIVERSAL CAMSHAFT BEARING TOOL
CHRYSLER CAM PHASER MASTER SET - VVT & VVL
19 PC FORD/MAZDA MASTER TIMING KIT
COMPACT WRENCHES FOR DAVCO AND PACCAR- High strength laser-cut steel for durability Number Size Applications Price
LIS-61380
R
R
Any diesel engine found in Caterpillar CT660, CT11, CT13, CT15, Cummins, Detroit Diesel, International, Mercedes Benz, Paccar, Daimler Trucks North America, Kenworth, Mack, Navistar, Peterbilt, Thomas Built Buses and Volvo. Detroit Diesel DD13, DD15 and DD16 engines found in Paccar, Daimler Trucks North America and Volvo. 3/8” Square drive. Works on fuel filters found on Kenworth, Peterbilt and Cummins diesels.
LIS-61180
$34.29
6”
Remove or insert camshaft bearings in nearly all engines from compact cars to heavy trucks. Range of 1.125” to 2.69” (28.58 - 68.3mm). In- cludes: Driving shaft, driving shaft extension, expander unit, (5) split driving plugs, (2) driving collars, centering cone and molded case. For more information visit www.lislecorp.com
$319.95 CCT-5063
Features • Cam Phaser & Timing Chain Locking / Holding kit for 3.0L, 3.2L, 3.6L VVT & VVL Pentastar engines • Includes 2 camshaft phaser holders, 5 timing chain holders & L-pin • Applications: 2011-2022 Chrysler, Dodge & Jeep models CCT-5001..................... $399.95
LIS-61170 LIS-61180 LIS-61190
$261.59 LIS-18000
LIS-61190
$38.59
8”
• Comprehensive tool kit services Ford, Lincoln, Land Rover & Mazda 1.4L, 1.5L, 1.6L, 2.0L, 2.3L, 2.5L & 3.0L engines • Used on EcoBoost, Duratec, Flex Fuel & GTDI engines from mid-90’s through today’s models
LIS-61380
$23.89
–
KAS-41570
FAN CLUTCH WRENCHES
Includes: 7/8”, 32mm, 36mm, 40mm thin, 47mm, 1-7/8”, 2”, new 52mm, and 2-1/8” driving wrenches; handle assembly; molded case. Wrenches fit FORD, GM, VW, BMW, International and Chrysler, newer Duramax and International. Use with air hammer. Removes and installs the fan clutch on many models when repairing or replacing water pump, timing chain, or the fan clutch. Includes: Universal Pully Holder with pin set (5x8mm); 22mm, 36mm, 36mm, 40mm and 47mm Fan Clutch Wrenches.
10 Pc. Pneumatic Fan Clutch Wrench Set
KAS-3472
LIS-43350
$199.95
LIS-43350
Fan Clutch Wrench Service Kit
KAS-41570
$157.49
KAS-3472
$69.29
Fan Clutch Wrench Set
Includes: Universal Pully Holder with pin set (5x8mm); 36mm fan clutch wrench.
KAS-3406
Square drive cut-outs designed for use with a breaker bar for added torque or length. Accommodates the 6 most commonly used wrench sizes: 22mm, 32mm, 36mm, 40mm, 48mm and 50mm.
KAS-3406
$40.89
6-in-1 Fan Clutch Wrench
• 32mm • 40mm • 50mm
• 36mm • 48mm • 22mm
LIS-59800
SERPENTINE BELT TOOLS
LIS-59650
Removes and installs belts on systems using the spring-loaded idler pulley. Includes 13–19mm sockets; 3/8” and 1/2” square drives, handle assembly, extension and case. Includes 3/8” and 1/2” square drives, 13, 14, 15, 16, 18 and 19mm sockets, extension, handle and socket set with holder. Everything you need for complete Serpentine Belt Tool vehicle coverage. Includes: long bar; three Pass-Thru® design adapters (3/8”, 1/2” and 3/4”); seven Pass-Thru® design 6-point sockets (13 – 19mm); three crowsfoot (13, 14, 15mm) and storage case. Unique magnetic faces hold the tool in place on the pulley, helping prevent damage to belt or pulley during removal or installation. Compact, one-piece tool can be used on the front or back side of the pulley. Double sided design allows the tool to work on both A/C and main drive pulleys when installing stretch belts on GM 5.3L, 6.2L, and 6.6L gas engines. The long tab is used on the A/C belt found on 2014 and newer GM trucks. The short tab can be used on the main drive belt found on 2019 and newer GM. Heat treated steel provides added strength. Black oxide finish.
LIS-59650
$107.19
Ratcheting Serpentine Belt Tool
KDT-89000
LIS-59800
$69.95
Serpentine Belt Tool
15 Pc. Serpentine Belt Tool Set with Locking Flex Head Ratcheting Wrench
KDT-89000
$111.29
LIS-59370
$23.59
Stretch Belt Remover/Installer
LIS-59370
LIS-59560
LIS-59560
$16.69
Stretch Belt Tool For GM
Made with FlippingBook flipbook maker