Cleanout And Record Keeping
Clean out the sprayer and all spray equipment after applying an Enlist ® herbicide
Triple-Rinse Sprayer As outlined in this Product Use Guide If The Next Crop You’re Spraying Is Glyphosate-Tolerant Corn Single-rinse sprayer with at least 10% of sprayer volume
After applying an Enlist ® herbicide, avoid overnight storage of spray solution in the tank and fully empty the sprayer of any solution. Be sure to clean out the sprayer before making your next application to any other crop. Thorough cleanout of the entire sprayer — including spray tank, boom, screens, filters, hoses and nozzles — is the first step to minimize the potential for sprayer contamination and damage to susceptible crops. Also, remember to keep other equipment, such as pumps, clean before switching to the next product. Follow the most stringent cleanout recommendation of any tank-mix partner included in the tank with an Enlist herbicide.
Scan the QR code to find the full sprayer cleanout guide.
RINSE 1
RINSE 2
RINSE 3
1. Completely drain the system (including pump, lines and spray boom) for at least five minutes. 2. Fill the tank with clean water to at least 10% of the total tank volume. 3. Circulate through the entire system for at least 15 minutes. 4. Spray out the solution through the boom/nozzles.
1. Completely drain the spray system (including lines and spray boom) for at least five minutes. 2. Remove and clean the filters and strainers. 3. Fill the tank with clean water to at least 10% of total tank volume (including cleaning agents at recommended rates, if desired). 4. Circulate through the entire system for at least 15 minutes. 5. Let the solution stand for several hours, preferably overnight if time allows. 6. Spray out the solution through the boom/nozzles.
1. Completely drain the spray system (including lines and boom) for at least five minutes. 2. Fill the tank with clean water to at least 10% of the total tank volume. 3. Circulate through the entire system for at least 15 minutes. 4. Spray out the solution through the boom/nozzles. 5. Completely drain the spray system; and remove and
clean nozzle tips and strainers separately.
29
Made with FlippingBook Digital Proposal Creator