2. INTERNAL BLOW-OUT
3. CENTRAL LOCK
4. STUD SENSING
IS THE PULL-STUD PRESENT ON THE FIXTURE? The retracting stud activates a stop valve, which helps to eliminate pneumatic or hydraulic static pressure. This condition is detected by a differential pressure switch.
DIRT AND CHIPS IN THE CLAMPING MODULE?
DIRT AND CHIPS UNWELCOME IN THE MODULE? The central lock prevents dirt and chips from entering when the pull-stud is being run out. It replaces the previously required protection pull-stud.
Using compressed air for cleaning removes dirt and debris from the inside while also providing workpiece support control through a differential pressure sensor.
6. COUPLING ELEMENTS
7. BLOW-OFF/SUPPORT CONTROL
IS A WORKPIECE LYING WITHOUT GAP OR NOT? The blow-out function with compressed air cleans the support surfaces and can also be used for workpiece support control through a differential pressure sensor.
ARE COUPLING ELEMENTS TO A FIXTURE NECESSARY? Oil and compressed air can be run through our couplings without leaks.
7
5
1
4
ZERO-POINT-SYSTEMS 11
Phone: 800-992-0236 ∙ Web: www.vektek.com
Made with FlippingBook - Online Brochure Maker