Automation solutions of VEKTEK
Pneumatic opening. Pneumatic blow-out. Operating pressure for opening: KP10.3 min. 5 bar - max. 12 bar. KP20.3 min. 4.5 bar - max. 12 bar. Cover and piston hardened. Repetition accuracy < 0.005 mm. With locking control (pneum.), opening control (pneum.) and support control (pneum.). Installation clamping module for automation solutions
Pull-in/locking force up to [kN]
Holding force [kN]
Blow out Weight [Kg]
Size
Model
10 17
25 55
● ●
1,4 2,6
570261 KP10.3 570260 KP20.3
Design : Centric blow-out, support control and opening and locking control. Application : Zero-point clamping system for automation solutions for set- up-time-optimised clamping during cutting and non-cutting machining. Note: Locking control: Dynamic pressure with locked clamping module, flow-through with opened clamping module. Opening control: Dynamic pressure with opened clamping module, flow- through with locked clamping module. Support control via the blow-out function: Dynamic pressure with supported interchangeable pallet. The installation clamping module is opened pneumatically and locked mechanically by spring force. Subsequent uncoupling of the pressure line is possible at any time (module is clamped at normal pressure). The clamping module has five connections:
KP20.3
KP10.3
1 = pneum. Opening 3 = pneum. Blow-out 4 = pneum. Opening control inlet 5 = venting 8 = pneum. Locking control inlet Dimensions: Model Size dia.D [mm]
dia.DN [mm]
dia.D1 [mm]
H [mm]
HA [mm]
dia.LK [mm]
M T
[mm] 570261 KP10.3 112 22 78,0 35 10 88 M6 25 570260 KP20.3 138 32 102,0 49 15 115 M6 34
Hydraulic opening. Pneumatic blow-out. Opening operating pressure: min. 60 bar - max. 70 bar. Cover and piston hardened. Repetition accuracy < 0.005 mm. With opening control (pneum.) and support control (pneum.). Installation clamping module for automation solutions
Model Size Pull-in/locking force up to [kN]
Holding force [kN]
Blow out Weight [Kg]
20
55
●
1,4
570262 KH20
Design : Centric blow-out, support control and opening control. Application :
Zero-point clamping system for automation solutions for set-up-time-optimised clamping during cutting and non- cutting machining. Note: Opening control: Dynamic pressure with opened clamping module, flow-through with locked clamping module. Support control via the blow-out function: Dynamic pressure with supported interchangeable pallet. The installation clamping module is opened hydraulically (1) and mechanically locked through spring force. Subsequent uncoupling of the pressure lines is possible at any time (module is clamped pressure-free). The clamping module has four connections: 1 = hydr. opening 3 = pneum. Blow-out and support control
4 = pneum. Opening control inlet 5 = pneum. Opening control outlet Dimensions: Model Size dia.D [mm] dia.DN [mm]
dia.D1 [mm] T [mm] 570262 KH20 112 32 78 44 10 M6 88 34 H [mm] HA [mm] M dia.LK [mm]
12 ZERO-POINT-SYSTEMS
Phone: 800-992-0236 ∙ Web: www.vektek.com
Made with FlippingBook - Online Brochure Maker