Partition ST60 Metal coating and aluminium honeycomb core
GSP-0205-E/B
Technical characteristics
Panel
Thickness
60 mm 2.36’’
0,20 m 0.65’ ; 0,25 m 0.82’ ; 0,35 m 1.15’ ; 0,55 m 1.80’ ; 0,80 m 2.62’ ; 1,00 m 3.28’
Widths
1,20 m 3.94’
Maxi. lengths
4 m 13.12’
6 m 19.68’
- 10,7 kg/m 2 2.19 lbs/sq.ft (2 faces 0,5 mm 0.019’’ steel) - 6,9 kg/m 2 1.41 lbs/sq.ft (2 faces 0,67 mm 0.027’’ aluminium)
Weight
Tightness in whole partition with silicon joint
Qs ≤ 0,0027 m 3 /h.m 2 0.0088 ft3/h.ft² under ∆P = 50 Pa 0.007 PSI
Maximum acceptable loads in partition
Bending resistance, panels on 2 supports
Partition height (m)
2,50 8.20’
3,00 9.84’
3,50 11.48’
4,00 13.12’
≤ 5,80 19.03’
q (daN/m 2 )
75 15.67 lbf/ft²
55 11.49 lbf/ft²
42 8.78 lbf/ft²
30 6.27 lbf/ft²
20 4.18 lbf/ft²
Installation
Profiles integrated in the thickness of ST panels, allow the assembly of panels and the passage of cables. The system uses an aluminium key profile that is inserted into the full length grooves both sides of wall panels. A special feature without the link profile allows this partition to become removable panel by panel, thanks to stainless steel clips. Assembly
joint silicone profile
stainless steel clips
Assembly between panels
Tightness - Silicon sealant (quality-label SNJF ; complies with FDA 21 CFR 175.105) - Polymer MS caulk
09-07-2019
Non contractual document - Dagard reserves the right to modify its products without notice.
-2-
DAGARD - Route du Stade - 23600 Boussac - FRANCE
info@dagard.com - www.dagard.com
11
Made with FlippingBook - professional solution for displaying marketing and sales documents online