Electrical race way
GSP-0213-E/B
The electrical raceway enables the passage of cables and accessories gathering between two panels of thickness 60 mm 2.36’’ from the Ultra-Clean line.
Description
The support and the cover are in lacquered aluminium, of width 100 mm 3.93’’ , of thickness 60 mm 2.36’’ , of basis length of 4 m 13.12’’ with a flat T-bracket for the mounting on adjustable belt. As the cover is fixed last, the cables can be set up after the partition mounting. All is totally recessed in the partition thickness and is flush on the two sides without visible fixings.
Technical characteristics
The removable cover enables to integrate different electrical accessories on semi-flush or flush way. - power socket, RJ45,... - switch - push button, lights,... - signal lamps
The electrical race way could be divided strong current-weak current. Openings, only on one part of the cover, are possible in factory or on site. Installation is the same as mullion mounting.
Non contractual document - Dagard reserves the right to modify its products without notice.
09-07-2019
-1-
DAGARD - Route du Stade - 23600 Boussac - FRANCE
info@dagard.com - www.dagard.com
19
Made with FlippingBook - professional solution for displaying marketing and sales documents online